|Number of USB 2.0 Ports||4|
Supermicro Motherboard Micro ATX DDR3 1600 LGA 1150 Motherboards X10SLL-F-O
- Make sure this fits by entering your model number.
- Memory: 4x 240pin DDR3-1600 DIMM Slots, ECC, Unbuffered, Max Capacity of 32GB
- Slots: 1x PCI-Express 3.0 x16 Slot (runs at x8), 1x PCI-Express 3.0 x8 Slot, 1x PCI-Express 2.0 x8 Slot (runs at x4)
- SATA: 2x SATA3 Ports, 1; 4x SATA2 Ports
- Ports: 2x USB 3.0 Ports (1 via header, 1 Type A), 6x USB 2.0 Ports (4 rear,?2?via header), 1x VGA Port, 2x Serial Ports (1 rear,?1?via header), 2x RJ45 LAN Ports, 1x RJ45 Dedicated IPMI LAN Port?
- Form Factor: MicroATX
Customers who viewed this item also viewed
Customers who bought this item also bought
Exclusive items from our brands
Have a question?
Find answers in product info, Q&As, reviews
Your question may be answered by sellers, manufacturers, or customers who purchased this item, who are all part of the Amazon community.
Please make sure that you are posting in the form of a question.
Please enter a question.
Compare with similar items
ASUS Micro ATX DDR3 1600 LGA 1150 Motherboard B85M-G
Supermicro A2SDi-4C-HLN4F - Motherboard - Mini ITX - Intel Atom C3558
ASRock Rack Motherboard C236 WSI
Supermicro Micro ATX DDR4 LGA 1151 Motherboards X11SSM-F-O
|Sold By||Available from these sellers||JAPAN SHOP NINJA||Amazon.com||Amazon.com||Technology Galaxy|
|CPU Socket||LGA 1150||LGA 1150||Information not Available||NA||LGA 1151|
|Item Dimensions||14.00 x 11.00 x 3.50 inches||9.20 x 7.60 x 2.05 inches||10.00 x 10.00 x 10.00 inches||10.00 x 12.00 x 15.00 inches||3.94 x 3.94 x 3.94 inches|
|Item Weight||2.02 lbs||1.82 lbs||1.00 lbs||2.00 lbs||—|
|Memory Slots Available||4||4||4||2||4|
|RAM Memory Technology||DDR3||DDR3||DDR||DDR4||DDR4|
|Supported Motherboard||Micro ATX||Micro ATX||Mini ITX||Mini ITX||Micro ATX|
|Total Pci Slots Free||3||0||—||—||—|
|Total SATA Ports||2||4||—||—||—|
Supermicro X10SLL F O LGA1150/ Intel C222 PCH/ DDR3/ SATA3&USB3.0/ V&2GbE/ MicroATX Server Motherboard.
There was a problem filtering reviews right now. Please try again later.
Some of the nice features are a Type A USB port located near the SATA ports for boot flash media to be installed permanently. Very nice for FreeNAS installs on bare metal. The IPMI is nice because it even works when the system is off. You can do all work remotely without a 'crash cart'. It just worked.
LSI SAS Raid chips use about 12 watts, and they do run hot. I had to install a fan over the card area to keep it cool. I am not using genuine server rack case, but a large gaming case. Really needs a decent amount of airflow across the SAS chip, the SAS chip draws more power than the Xeon does at idle. That is was the only surprise I had to deal with, you will have the same issue since this motherboard has the same SAS chip mounted directly to the motherboard if you don't use a rack server case.
I didn't have to install any drivers in Ubuntu, pfSense, FreeNAS, or ESXi.
While it does not immediately impact my uses for the board, I am left with the task of replacing the board, reassembling everything, and reconfiguring my NAS should I ever decide I want a working video output. For a board that's less than 2 years old, that's disappointing. I left 3 stars as it has served it's function properly until now, and should continue to do so in my case, provided no further issues arise.
First attempt failed using this board for a ESXI configuration. Paired with an e3-1231v3 + 2x4GB Kingston ECC
The board powers up and posts, but it hangs on the Supermicro post screen with "IPMI Initializing" on the bottom left corner. After about 3-4 minutes, it will continue through post and give bios options. Bios shows IPMI firmware version as "Not Working." Poked around Supermico support and it looks like IPMI firmware is bricked. This is concerning since this should be a new board straight from the manufacturer. It allows me to set an IP address for IPMI, but it is non-responsive; the MAC address also shows blank. The board's main bios is already on the latest build (v3.0)
Attempted to reflash the IPMI bios through DOS, but it fails. Severely disappointed with the experience so far - the product already arrived 2 days late when it was supposed to be overnight. Hopefully Amazon can redeem the situation with a working replacement and I can update the review...
The first board I recieved was similar to the other reviewer, where IPMI was not detected at all, and the flash tools were not able to reset the bmc into a state that could be flashed. Willing to update the review when I get the replacement board from Amazon if it works.