Almost every glue gun that I have ever used before this one, was the typical small gun that drips when it is hot and sitting. That is just the beginning for this wonderful glue gun that does NOT drip. It has a full grip so your whole hand can control the trigger. When you release the trigger, the pressure on the glue stick is released, so there is no way the glue is forced out of th gun when you don't want it.
The built-in wire stand holds the gun upright as pictured. When sitting like that, it does not drip. When dispensing glue, the gun gives you a lot of control. The glue goes where you put it, and in the amounts that you intended to use.
Being a 100 watt gun, it makes very hot glue, this gun is not a toy for children, the glue coming from it will burn you. This might sound like a defect, but it is actually just the opposite. When applying hot glue to whatever you intend to glue, the last thing you would want is for the glue to start to harden before you get the parts mated properly. In order for that to happen, the glue must be very hot, and it is.
As a tip, if you are gluing something big and it is cold, it will be hard to get your project together before the glue starts to set. heat the project parts with a blow dryer, once they are warm, start gluing the parts.
The tip of the gun has plastic around it and the tip can be removed, and exchanged for other tips that are sold separately. It would be nice if they sold a package deal that came with the three extra tips for a discounted price. In any case, the three tips that are sold together are very useful. You get one that is flat and wide, one that is long and skinny, and another that is wider round and has the tip cut at an angle. The tip that comes with the gun is a fine general use tip, and it will be what most people would use. Someone who is working with wood might want the wide flat tip. The red plastic that is around the stock tip allows the glue to be peeled off of it, The three optional tips are aluminum and brass, and have a plastic washer that goes between the tip and the gun. I'm guessing that is so the tip can be removed more easily after it is used. The tips are very rugged, and made well. The gun has a 5 foot two conductor electrical cord. Over all this is a quality product that fully deserves its current five star rating. The last bit of information I would like to share with you is about the glue. Hot glue is far from all being the same. Stanley makes some glue that is tough as nails, and sticks to nearly everything. When you find it, you will have to read the reviews before you buy it. That is how costly it is, It is as good as they say, and if you need a super strong glue that will stick to almost anything, you will want Stanley GS500BK, it is a yellow glue, and that is the only complaint anyone ever had about it. I should also mention that not all glue guns can use that Stanley GS500BK, that is because many glue guns are no where near 100 watts, and this glue needs this gun, or a hotter gun, but not a colder gun. Other glue that is very good is made by Surebonder, the makers of this glue gun. It is called Best Stick, and while the package says that it is 40% stronger, they don't compare it to any other glue, all I can say is that it is very good glue, and it cools to a nice hard finish. You might ask about what makes hot glue not good? It is about how soft the glue is at room temperature, and how soft it would get in common everyday situations. The last thing anyone wants is for their hot glued parts top come apart when they get warm, and something puts a little pressure on it. I mentioned two glues you can buy on Amazon, both are excellent.
| Color | Black |
|---|---|
| Brand | Surebonder |
| Style | Protective,Safety,Professional |
| Item Weight | 1.1 Pounds |
| Power Source | Corded Electric |
| Wattage | 100 watts |
| Voltage | 120 Volts |
| Compatible Material | Industrial |
| Manufacturer | FPC CORPORATION |
| Part Number | PRO2-100 |
| Item Weight | 1.1 pounds |
| Product Dimensions | 9 x 2 x 8 inches |
| Item model number | PRO2-100 |
| Is Discontinued By Manufacturer | No |
| Size | 7/16", 1/2", 0.45", 0.43" |
| Material | Plastic |
| Item Package Quantity | 1 |
| Number of Handles | 1 |
| Included Components | Surebonder PRO2-100 100-Watt High Temperature Industrial Glue Gun, Black |
| Batteries Included? | No |
| Batteries Required? | No |
| Warranty Description | Warranty |
