Shop top categories that ship internationally
Currently unavailable.
We don't know when or if this item will be back in stock.
Added to

Sorry, there was a problem.

There was an error retrieving your Wish Lists. Please try again.

Sorry, there was a problem.

List unavailable.

TEKTON 5680 3-Inch 3-Jaw Gear Puller

4.1 out of 5 stars (209)
Currently unavailable.
We don't know when or if this item will be back in stock.
  • Three-jaw design evenly distributes pulling forces to slide gears, pulleys, and flywheels off shaft without damage
  • Universal 4-position reversible jaws offer inside or outside grip and short or long reach
  • High-strength forged and hardened steel jaw arms
  • Cold rolled, acme-threaded steel drive screw for smooth operation even under high stress
  • Jaw Spread: 4-1/2 in.; Jaw Reach: 1-1/2 in.

From the manufacturer

TEKTON 5680 3-Inch 3-Jaw Gear Puller

Smoothly and safely slide gears, pulleys, flywheels and other press-fit parts off shaft with the versatile TEKTON 5680 3-inch, 3-jaw gear puller.

Features

Three-jaw Design

Three-jaw design evenly distributes pulling forces to slide gears, pulleys, and flywheels off shaft without damage

Universal 4-Position Reversible Jaws

Its universal design can grip four different ways: around outside edge or through inside openings while set in either short reach or long reach positions.

Cold Rolled Acme-Threaded Screw

Turn drive screw with any style hand wrench or ratchet and the precise, cold-rolled acme threads glide along smoothly without binding or chattering, even under high stress.

5680 Gear Puller
5685 Gear Puller
5690 Gear Puller
5692 Gear Puller
5696 Gear Puller Set
5702 Gear Puller Set
Buying Options
Buying Options
Buying Options
Buying Options
Buying Options
Buying Options
Customer Reviews
4.1 out of 5 stars 209
4.1 out of 5 stars 209
4.1 out of 5 stars 209
4.1 out of 5 stars 209
—
3.8 out of 5 stars 80
Size 3 inch 4 inch 6 inch 8 inch 3, 4, 6 inch 3, 4, 6, 8 inch
Jaw Count 3 3 3 3 3, 3, 3 3, 3, 3, 3
Jaw Spread 4.5 inches (114mm) 6.25 inches (158mm) 8.75 inches (222mm) 10.5 inches (266mm) 4.5, 6.25, 8.75 inches 4.5, 6.25, 8.75, 10.5 inches
Jaw Reach 1.5 inches (38mm) 2.5 inches (63mm) 4.75 inches (120mm) 6.25 inches (158mm) 1.5, 2.5, 4.75 inches 1.5, 2.5, 4.75, 6.25 inches
5681 Gear Puller
5686 Gear Puller
5691 Gear Puller
Buying Options
Buying Options
Buying Options
Customer Reviews
4.1 out of 5 stars 209
4.1 out of 5 stars 209
4.1 out of 5 stars 209
Size 3 inch 4 inch 6 inch
Jaw Count 2 2 2
Jaw Spread 4.5 inches (114mm) 6.25 inches (158mm) 8.75 inches (222mm)
Jaw Reach 1.5 inches (38mm) 2.5 inches (63mm) 4.75 inches (120mm)

Product information

Technical Details

Manufacturer ‎TEKTON
Part Number ‎5680
Item Weight ‎1.15 pounds
Product Dimensions ‎8.75 x 5.75 x 1 inches
Item model number ‎5680
Size ‎3 in.
Style ‎Jaw Count - 3
Item Package Quantity ‎1
Number Of Pieces ‎1
Warranty Description ‎Always Guaranteed: support@tekton.com

Additional Information

ASIN B000NPPB1K
Customer Reviews
4.1 out of 5 stars (209)

4.1 out of 5 stars
Date First Available February 24, 2007

Warranty & Support

Amazon.com Return Policy:Amazon.com Voluntary 30-Day Return Guarantee: You can return many items you have purchased within 30 days following delivery of the item to you. Our Voluntary 30-Day Return Guarantee does not affect your legal right of withdrawal in any way. You can find out more about the exceptions and conditions here.

Feedback

TEKTON 5680 3-Inch 3-Jaw Gear Puller

Found a lower price? Let us know. Although we can't match every price reported, we'll use your feedback to ensure that our prices remain competitive.

Where did you see a lower price?
/
/
/
/
Please sign in to provide feedback.

Product Description

Smoothly and safely slide gears, pulleys, flywheels and other press-fit parts off shaft with the versatile TEKTON 5680 3 in. 3-Jaw Gear Puller. Its universal design can grip four different ways: around outside edge or through inside openings while set in either short reach or long reach positions. Three jaws evenly distribute powerful pulling forces, protecting edges of gear from bending or chipping damage. Turn drive screw with any style hand wrench or ratchet and the precise, cold-rolled acme threads glide along smoothly without binding or chattering, even under high stress.

Top Brand: TEKTON

Highly Rated
100K+ customers rate items from this brand highly
Trending
100K+ orders for this brand in past 3 months
Low Returns
Customers usually keep items from this brand

Customer reviews

4.1 out of 5 stars
209 global ratings

Customers say

Customers find the puller works well, particularly for removing crank pulleys and brake calipers, and appreciate its high quality, strength, and ease of assembly. They consider it good value for money, noting it saves time and money, and one customer mentions it performs as well as more expensive tools. The removal ability receives mixed feedback, with several customers reporting issues with screws coming loose during use.

Select to learn more

Works wellQualityValue for moneyPuller qualityBuild qualityStrengthEase of assemblyRemoval ability
66 customers mention "Works well"63 positive3 negative

Customers find that the puller works well, particularly for removing crank pulleys and steering wheels.

"bought this to pull off a rusted rotor works well" Read more

"Works fine. I needed to pull a clutch off an 8-HP engine used on a chipper/shredder. Seems to be well made. Only used it once." Read more

"...came as described and works great." Read more

"Worked great. Pulled off broken gear! Like 30 seconds!" Read more

39 customers mention "Quality"32 positive7 negative

Customers find this puller to be a high-quality tool.

"It is a good tool for when you need a 3 jaw puller, unfortunately it was to big for wat I needed it for I'm sure I'll use it for something else down..." Read more

"great tool, worked perfectly to remove steering wheel F150..." Read more

"Great product, fast shipping. I just purchased the wrong size. i needed a larger size and this one didn't do the job...." Read more

"Good product that works" Read more

26 customers mention "Value for money"24 positive2 negative

Customers find the puller to be a great value, offering decent quality for the price and saving time and money.

"Great price on good low end pullers. Have worked every time I needed them." Read more

"good value id order another one anytime" Read more

"...This tool saved me time and money! Thank you for a good quality part!" Read more

"...I've used it several times already.It's a great product for the price! Thanks!" Read more

18 customers mention "Puller quality"17 positive1 negative

Customers find the puller effective, particularly for brake calipers and pulleys, with one customer mentioning its success with snow blower gears.

"good gear puller, this puller I used to take bearings of small machines, this big, but it works well, I recommend" Read more

"Great puller. *Very* flexible in size...." Read more

"It pulls gears and wheels. You can remove the bolts and set up for various depth combinations plus inside or outside grab...." Read more

"This product is perfect for taking out pulleys from blower motors in commercial HVAC & Refrigeration equipment." Read more

14 customers mention "Build quality"12 positive2 negative

Customers appreciate the build quality of the puller.

"Pros: Very well made. Can be used in many configurations. Shipped very fast. Easy to understand directions...." Read more

"...Seems to be well made. Only used it once." Read more

"...Very well built and heavy. Only left a small dot on the end of the motor spindle." Read more

"Works very well, and solidly built." Read more

13 customers mention "Strength"11 positive2 negative

Customers find the puller strong.

"As described and sturdy. Just not a fit for the crank that I needed to pull." Read more

"This puller works great. heavy duty and easy to work." Read more

"Good to pull out the bearing wheel from my air condition . Strong metal." Read more

"Strong puller and good design" Read more

6 customers mention "Ease of assembly"5 positive1 negative

Customers find the gear puller easy to assemble and use.

"...Can be used in many configurations. Shipped very fast. Easy to understand directions. I could get my gear out with ease. Cons:..." Read more

"...Turns out I didn't need to use it. However, it was very easy to assemble and it was priced much lower than anything comparable at any of the three..." Read more

"Needed to pull a flywheel on a 9HP engine. Tekton puller was easy to assemble & use. Put tension on with gear puller and tapped with a rubber mallet...." Read more

"...The instructions were perfect and the quality of this steering cable is excellent...." Read more

13 customers mention "Removal ability"5 positive8 negative

Customers have mixed experiences with the puller's removal ability, with some successfully removing parts while others report issues with screws letting out.

"Decent quality. Screws will let out and require reassembly. Not a big deal but feels a little flimsy at times." Read more

"Used it to pull the steering wheel off my 2002 Jeep. Grabbed nice and tight and removed the steering wheel after a little intimidation." Read more

"...I admit there was no good surface to get a good bite. It kept slipping off. Finally I got it to stay after flipping the hooks over...." Read more

"...this for anyone the bolt isn't made of hardened steel and it's loose in the puller. I wouldn't get another one of these if they were giving them away!" Read more

but good to have in the shop
5 out of 5 stars
but good to have in the shop
For the price this seems to be a descent tool. Not something I use all the time, but good to have in the shop. I needed it to remove a bearing from a shaft, but if could come in handy for a number of applications. Satisfied
Hide
Thank you for your feedback
Sorry, there was an error
Sorry we couldn't load the review

Top reviews from the United States

  • Portelo
    5.0 out of 5 stars 13' Boston Whaler steering cable replacement
    Reviewed in the United States on May 15, 2016
    Verified Purchase
    I bought this set up for my 1996, 13' Boston Whaler and just installed it this morning. It took two of us to do the actual steering cable removal and installation, but the actual helm replacement is a one man job.
    The instructions were perfect and the quality of this steering cable is excellent. We did follow all details as mentioned and were successful in replacing all parts. The most complicated portion was the removal of the steering wheel. We used a 4" gear puller and were successful on the first pull. I'm sure that soaking the components in WD 40 the night before also helped. The most important advice I can give is to follow the clear instructions provided with the assembly.
    It took roughly 3 1/2 hours for the complete removal & installation.
    One person found this helpful
    Helpful
     Report
  • E. Allison
    5.0 out of 5 stars Nice part, did the job with ease.
    Reviewed in the United States on August 10, 2016
    Verified Purchase
    I bought this 6"-3 jaw puller to remove my 2006 F350 rear axle pinion flange. The main bolt takes a 1/2" or 13mm socket. The different bolt holes and configurations allowed me to adjust the tool to fit my needs. Once I got the tool set it took less than one minute to pull the pinion flange off the pinion gear. This tool saved me time and money! Thank you for a good quality part!
    2 people found this helpful
    Helpful
     Report
  • Calvin
    4.0 out of 5 stars Works as designed for occasional jobs
    Reviewed in the United States on August 15, 2013
    Verified Purchase
    Although I do frequent car maintenance and repairs, I purchased this puller for the purpose of pulling ebike hub motor stators and covers. It does the job just right. For certain jobs, it may take taping some quarters to the arms so that you don't interface too much with the diameter of the stator.

    I have not used this for any car purposes, but will update if the use arises. Decent deal for a dozen dollars at the time I purchased it. To the guy giving it 1 star because he couldn't get it to work for his steering wheel: Was it a fault of the puller's design, size or contruction that held you back?
    One person found this helpful
    Helpful
     Report
  • Chris C
    5.0 out of 5 stars VERY versatile; AT LEAST quite strong (I would have to break something to narrow it down further than that and I'm unwilling to)
    Reviewed in the United States on August 9, 2015
    Verified Purchase
    So far, I used it to get the sprocket off the injector pump on a diesel Volkswagen Rabbit. It works fine for that! The hooks are thick in an effort to make it stronger. I ended up being able to fit them behind the sprocket just good enough. It's very versatile as far as depth and width capabilities. There is a point on the center bolt that kept it in position nicely. The thread on the center bolt is quite coarse. This is actually a good thing. You can feel that you're applying a lot of pressure. It scares you, which can be good. In my case, after I had applied a lot of pressure, I chickened out and smacked the side of the sprocket with a hammer buffered by a piece of wood. The sprocket sprang right off (and it had really been on there). Very nice, useful thing, if you ask me.
    Helpful
     Report
  • Edgar B.
    1.0 out of 5 stars still cheap but better
    Reviewed in the United States on October 1, 2017
    Verified Purchase
    Do Not Buy. very flawed design. the hinges bend when under load and the lack of a swivel tip means the tip will destroy what it is pressing against. buy the kit at harbor freight instead. still cheap but better design
    Helpful
     Report
  • I. Hunter
    3.0 out of 5 stars Not unhappy, but would not buy again
    Reviewed in the United States on January 22, 2015
    Verified Purchase
    I bought a light-duty, small, cheap puller, and that is what I got. This puller may be fine for pulling pulleys off of things like alternators. Do not even think about using it on tie rod ends or any other suspension/steering application. The puller is held together with Grade 2 hardware store bolts; the arms are very rough. The main screw, however, looks fine.

    I like to have a cheap puller or two around for odd applications where I need to grind the arms down to make it fit. That said, I would have been better off waiting for a vintage puller on FleaBay.

    The puller is marked: Performance Tool, w87122. FWIW, some Performance Tool tools are first rate...not this puller.
    Helpful
     Report
  • Brian
    5.0 out of 5 stars This is a niche tool that you will hardly ever ...
    Reviewed in the United States on September 4, 2016
    Verified Purchase
    This is a niche tool that you will hardly ever use unless you're a professional mechanic or machine tech, but when you need it, there is no other way to do the job. I needed to pull bearings off an old jointer head that was rusted out and nothing got them free. When I read about this tool on a forum I bought it immediately, and it got them off in the first try. I don't know how I would have done this without this gear puller. It's inexpensive and very effective.
    2 people found this helpful
    Helpful
     Report
  • Frank Barretto
    5.0 out of 5 stars Does the job!
    Reviewed in the United States on May 6, 2017
    Verified Purchase
    I was replacing the crankset on a fixie bike and the driver side was stripped so I could not get it off for the life of me. I tried banging it out with a screw driver and hammer, then a 2 x4 and a hammer, nothing worked. I finally watched a repair video and the guy was using this gear puller, wish I had known about this earlier. Anyways, it's a learning process for me, I order this and got the crank arm off in no time at all, replaced it with the new one I had ordered and all is good again in La La Land!
    2 people found this helpful
    Helpful
     Report

Top reviews from other countries

  • Brandon
    5.0 out of 5 stars It works
    Reviewed in Canada on October 18, 2016
    Verified Purchase
    Easy to use and it works
    Report
  • rock legare
    5.0 out of 5 stars Five Stars
    Reviewed in Canada on July 18, 2017
    Verified Purchase
    Très bien 👍
    Report
  • Niels
    3.0 out of 5 stars Jaws are too thick for some jobs
    Reviewed in Canada on July 31, 2016
    Verified Purchase
    Good price, modest quality. The jaws are too thick for some applications. Fine for infrequent use where thin strong jaw tips are not required
    Report
  • Jesse ward
    5.0 out of 5 stars Five Stars
    Reviewed in Canada on July 8, 2016
    Verified Purchase
    Good too goo
    Report
  • Pure
    5.0 out of 5 stars Five Stars
    Reviewed in Canada on November 7, 2017
    Verified Purchase
    Perfect!
    Report

Product Summary: TEKTON 5680 3-Inch 3-Jaw Gear Puller

From TEKTON

4.1 out of 5 stars, 209 ratings

Customer reviews

Price

No featured offers available

Other sellers

Other sellers

About this Item

  • Three-jaw design evenly distributes pulling forces to slide gears, pulleys, and flywheels off shaft without damage
  • Universal 4-position reversible jaws offer inside or outside grip and short or long reach
  • High-strength forged and hardened steel jaw arms
  • Cold rolled, acme-threaded steel drive screw for smooth operation even under high stress
  • Jaw Spread: 4-1/2 in.; Jaw Reach: 1-1/2 in.

Product Description

Smoothly and safely slide gears, pulleys, flywheels and other press-fit parts off shaft with the versatile TEKTON 5680 3 in. 3-Jaw Gear Puller. Its universal design can grip four different ways: around outside edge or through inside openings while set in either short reach or long reach positions. Three jaws evenly distribute powerful pulling forces, protecting edges of gear from bending or chipping damage. Turn drive screw with any style hand wrench or ratchet and the precise, cold-rolled acme threads glide along smoothly without binding or chattering, even under high stress.
Report an issue with this product or seller

Feedback

Did you find this product summary feature useful?

Thank you for your feedback
Thank you for your feedback. You selected "Yes, it is useful"
Thank you for your feedback. You selected "No, it is not useful"
Product summary presents key information. Close to see all product details.