|Item Weight||3.5 ounces|
|Product Dimensions||196.8 x 1 x 0 inches|
|Item model number||TT-SL001|
|Size||150 leds strip light Kit 24K|
|Style||150 Leds 24Key Kit, Waterproof|
|Item Package Quantity||1|
|Type of Bulb||LED|
TaoTronics® RGB SMD Led Strip Light Kit(16.4ft, 150 LEDS, 24K remote & 60w Power Supply, Waterproof)
We don't know when or if this item will be back in stock.
Customers Who Bought This Item Also Bought
From the Manufacturer
Using a double layer of copper on a PCB board,the lights offer lower resistance, better energy efficiency, and color combinations that look morenatural and saturated. The thicker copper layer helps heat dissipation and prolongs the LED lifespan.
Use the adhesive tape to put the strip light anywhere for a beautiful glow. The 24-key remote controller offers 16 preset colors at your finger tips.
The lights are perfect for using outdoors thanks to the IP65 weatherproof rating - protection against humidity and the occasional splashing.
|TT-SL001 150 LED Strip Light||TT-SL007 300 LED Strip Light||TT-SL029 Music Controlled LED Strip Light||TT-SL032 Copper LED String light|
|Number of LED||150||300||300||100|
|LED type||SMD, RGB 5050 Multi Color||SMD, RGB 5050 Multi Color||SMD, RGB 5050 Multi Color||SMD Warm White|
|Controller||24Key||44Key||20 Key Music/Sound Controlled Remote|
|Length||5M / 16.4 feet||5M / 16.4 feet||5M / 16.4 feet||10M / 33 feet|
Top Customer Reviews
|Length: 0:39 Mins|
Pros I found after a lot of research:
Changes color vs having to install 4 light strips total with 4 strips
New version of LEDs that has a better energy efficiency vs the old bulb style
-5050 SMD is 3x brighter with larger bulbs than 3528 SMD
-The controller runs off the 12volt side so it can hook up to boat, RV, 12v landscape lighting, etc, without the 120v power supply and have full functionality.
-Can cut/connect every 3rd LED but you have to add solder or use a connector as with most RGB (red green blue, to get all color options) 5050 strips. As usual it has solder joints every foot for soldering.
-Power could be on for days and not affect my two boat batteries. Only 2 amps for the whole strip! For comparison most lights in a car dome light are 3 to 3.5 amps. So If You just used one 5050 circuit (3 lights) You would be using dozens of times less power than one normal bulb. I made 4 of these smaller strips and put them in my boat courtesy light fixtures as well, which are separate from my gunwale lights.
-Cheap controllers and remotes can be found everywhere
-Universally found products I did not know about until tonight when I started looking; even music box regulators that change the lights to the music.
-12 Volts is safe
-power supply to test soldering as you go.
- Remote was spotty at a distance of 30 to 40 feet as expected, but I plan to mount the remote on velcro next to the sensor as a light-switch type setup.Read more ›
I took one star off for the difficulty of the installation. I know this is hard for others that don't have an engineer or electrical background. Then again if you have never soldered before; this is a great way to learn. Remember scrape of the silicone covering the connection before you solder them together. If you have enough patience to read about soldering then I'm sure anyone with common sense and some drive some people can do it without any experience, but Common sense isn't so common. If your one of the people that have common sense but no drive.
Trust me you will regret attempting this install UNLESS you do it the flexible way. It's ONLY flexible one way. If you intend to buy without soldering, then you can ONLY install it the flexible way.
If you want the light to face down and you install it on the roof. When you reach a corner. SOLDER TIME. if you want the light up the by facing horizontal and you are sticking them to the wall. Then your in LUCK. No Soldering for the corner in that application. Have Fun. So worth the hard work of soldering.
Just found and adapter for corner that is already soldered for you. If I would of known this it could of saved me soldering. Haven't tried but it's called LED Strip connector 4. Has to have 4 cables to it for colors. Don't get he one with 2 cables. Your colors will not work. GOOD LUCK
I have had these for about a year and a half and they are now getting really ugly. When I set them to white, there are 7 of the 3 LED segments that are a different color (usually red or pink). The rest are now yellowish green at 2/3 of the original brightness. A group of 24 LEDs quit working all together, but if you touch them they turn on to the original bright slightly bluish white. They claim 5000 hours but these don't even have 500 hours on them. I wish I knew where I could get some just like these that would last.
Most Recent Customer Reviews
Love the lights! Simple plug and play with interesting effects.Published 1 day ago by Jon Scherling
These lights are so awesome, you'll love them. They are so bright and have so many beautiful color options it's amazing. Read morePublished 17 days ago by Amazon Customer
The LEDS are bright and look great but the adhesive backing has little to no hold. I tried to use these under my desk which is a smooth surface, even after wiping the surface... Read morePublished 1 month ago by Michael
I have some sweet under cabinet lighting, but I'm having some issues with all the colors showing when selecting individually, but they all work with on flash or fade modes.Published 1 month ago by Amazon Customer
These are pretty great. I used them for under cabinet lighting. They're not quite as bright on the white mode as I would have liked but they still do a nice job lighting up the... Read morePublished 1 month ago by Josh
Absolutely great product. I had aligned the strips along the edges of my ceiling to create smooth lighting and it works great! Read morePublished 1 month ago by Amazon Customer
so it has been working for a wile and i have liked this unit, the sticky part has started to come undone and i purchased some new 3m double sided to re apply it, colors are bright... Read morePublished 1 month ago by Hunter Lewis