DuOrb CPU Cooler
- Enter your model number to make sure this fits.
- Extension of DuOrb Cooler Design, after DuOrb VGA, the DuOrb architecture-inspired CPU cooler with 6 different channels
- Blue-Red LED Light Fans, two 80mm fans come equipped with LED lights, one with blue and one with red
- Unique Silent Fan makes at most 21 dBA at fan speed
- Copper Construction, Copper Heatpipe, Fin, and Base, provides maximum heat conductivity and dissipation performance
- 6 Distinct Designed Heatpipes remove heat from source via the channels
Customers also shopped for
At first sight of the DuOrb CPU cooler, the unique design and red and blue LED lights will catch your eye. The patented design features two separate fin configurations, bringing an unprecedented visual aspect.The DuOrb CPU cooler has a design concept extended from the DuOrb VGA cooler, and both of them are getting lots of favorable reviews. A Dual-Flow Design further utilizes system air flow to cool down surrounding temperatures and dissipate the heat of the CPU, RAM, VRM, North Bridge, and the back of the VGA card. Red-Light Orb cools the RAM area and Blue-Light Orb cools the CPU surrounding area. Double-Sided Radiant Heatpipes Penetrating Fins transmit heat evenly and efficiently Mirror Coating Copper Base develops perfect heat dissipating contact surface between CPU and DuOrb Double-sided radiant heatpipes penetrating fins with mirror coating base 2000-RPM Fan Speed 21 dBA Noise Level 37.67 CFM Air Flow 1.27 mmH2O Air Pressure Blue LED Fan, Red 3-Pin Power Connector Compatibility - Core 2 Extreme (Socket LGA775), Core 2 Quad (Socket LGA775), Core 2 Duo (Socket LGA775), Pentium D (Socket LGA775), Pentium 4 (Socket LGA 775), Celeron D (Socket LGA775), Celeron (Socket LGA775), Phenom (Socket AM2, AM2+), Athlon 64 FX (Socket AM2/939), Athlon 64 X2 (Socket AM2/939), Athlon 64 (Socket AM2/939/754), and Sempron (Socket AM2/754) Fan Dimension - Approximately 3.15 x 0.79 (80x20mm) Heatsink Dimension - Approximately Length 7.95 x Width 4.17 x Height 3.39 (202x106x86mm) Weight - 598 grams
Top customer reviews
I used this on an AMD Phenom ii x2 555
on Asus Rampage Extreme x48 board, it wasn't easy to install, I got to remove the optional Mosfet cooler "left-side", and got a long time trying to install it because the clip was pushing both upper Mosfets cooler and Northbridge! but got it finally installed :P
This cooler is super quiet, good looking, and well made, and it comes with thermal grease..
This cooler will cool down your CPU, CPU MOSFETS & RAM "I'm using G.Skill RipJaws X"..
Soon I'll see how far a Q6600-G0 will go..
The main problem with this cooler is that it doesn't come with a clip for LGA1366 processors !!
The good thing about the wide design is its unique twin fin solution to cooling. Because cooling loads are split between the two fans, they can both run slower and thus quieter. It also performs extremely well under stress. I'd say it's has about the same performance as the Zalmon 9X00 series which is a good thing.
So, if you're not too worried about its sometimes cumbersome girth, but want premium cooling that won't sound like a wind tunnel, I'd say this one is a fine choice.