- Corrosion-resistant stainless-steel cabinet with painted finish, includes three aluminum shelves, and has a 42.5L (1.5cu ft) capacity
- Simultaneous LED display of setpoint and actual temperature with push-button view; resolution to within 1 Degree C
- Keypad data entry and pull-out control module for easy service
- Independent overtemperature safety system factory set with reset push-button; maximum temperature of 260 Degree C (500 Degree F)
- Warranty: 12 months
Have one to sell?
Thermo Scientific ELED VO1218A Painted Steel Finish Lindberg/Blue M Vacuum Oven with Digital Microprocessor Control, Over-Temperature Protection and Three Shelves, 120V/60Hz, 42.5L/1.5-Cubic Foot Capacity, +6 to 260 Degree C
Note: Signature required upon delivery due to high value of this item. Details
Usually ships within 1 to 3 months.
Ships from and sold by Amazon.com.
Specifications for this item
|Brand Name||Thermo Scientific|
|Number of Items||1|
|Chamber Material Type||Corrosion-resistant stainless steel|
|Controller Type||Digital Microprocessor|
|Inside Height||12 inches|
|Inside Length||18 inches|
|Inside Width||12 inches|
|LowerTemperature Range||6 Degrees Celsius|
|Overall Height||29 inches|
|Overall Length||26 inches|
|Overall Width||21 inches|
|Temperature Uniformity||+/- 3.5 Degrees Celsius|
This shopping feature will continue to load items. In order to navigate out of this carousel please use your heading shortcut key to navigate to the next or previous heading.
Customers Also Shopped For
Page 1 of 1 Start overPage 1 of 1
This Thermo Scientific ELED Lindberg/Blue M vacuum oven had a 42.5L (1.5cu ft) capacity, and requires 120V. Designed for drying, curing, outgassing, aging, process control and other applications that require elevated temperature in reduced atmospheres or vacuum/purge with nonflammable and inert atmospheres. Has a maximum temperature of 260 Degree C (500 Degree F) with nominal uniformity of ±3.5 prcent of setpoint. Simultaneous LED display of setpoint and actual temperature with push-button view, resolution to within 1 Degree C. Keypad data entry and pull-out control module for easy service. Independent overtemperature safety system factory set with reset push-button. 1-Inch (2.54cm) manifold, chamber rear, exterior, connects to pump or in-house vacuum source. With inert gas injection valve, fresh air inlet, vacuum exhaust port, controllable vacuum release vent port. 1000 microns (1torr) capacity. Vacuum gauge, vacuum, gas and inlet valves located on front. Corrosion-resistant stainless-steel cabinet includes three aluminum shelves with painted steel finish. Rear-mounted vacuum manifold connects to pump (not included) or in-house vacuum source. Low-watt heating element extends oven life. Heavy-gauge steel, dual-wall construction with fiberglass insulation for minimum heat loss in walls and door. High-temperature silicone gasket is specially molded for a positive seal. Magnetic latch for positive door seal. Viewing windows are 0.5in (1.3cm) thick, and permit observation of work in progress without loss of heat. Caution, ovens are not suitable for use with hazardous vapor. For use with nonflammable, noncorrosive inert gases only. Includes power cord and three aluminum shelves. Shipping Weight: 250lbs. Control: Digital Microprocessor. Vacuum: 1 x 10-2, torr (10microns). Temperature Range: 6 to 260 Degree C. Temperature Resolution: ±1 Degree C. Temperature Uniformity: ±3.5 Degree C. Display: LED. Safety Features: Overtemperature Safety System. Chamber: Corrosion-Resistant Stainless Steel. Ports: Inert Gas Port, Vacuum Port and Vent Port. Capacity: 42.5L (1.5cu ft). Interior Dimensions (D x W x H): 18 x 12 x 12in. Exterior Dimensions (L x W x H): 26 x 21 x 29in. No. of Shelves: 3. Finish: Painted Steel. Voltage Rating: 120V. Frequency: 50/60Hz. Power Rating: 1250 watts. Warranty: 12 Months. Certifications: UL Listed. Thermo Scientific ELED #: VO1218A. Thermo Scientific ELED - "Every Lab, Every Day".
There are no customer reviews yet.