I attached this under our cabinets and over our toaster oven, microwave, and electric kettle to help prevent fires and steam damage. I'm probably being paranoid about the fire danger but for about 20 dollars, this makes me feel better. I cut it to size and made it extra wide and still had a bit left over. I attached it (pink side up, foil side down) with little strips of heavy duty 3m double sided tape and it is holding up fine. It looks fine, which is to say it doesn't really call attention to itself, and makes me feel better since the toaster over especially generates a lot of heat.
Bild nicht verfügbar
Keine Abbildung vorhanden für
Farbe:
Farbe:
-
-
-
- Herunterladen, um dieses Videos wiederzugeben Flash Player
Thermo-Tec 14130 Thermoschutz, 61 x 122 cm, einseitig
41,68 $ 41,68$
Keine Vorauszahlung von Importgebühren und 23,38 $ Versand nach Österreich Details
Details zu Versand und Gebühren
| Preis | 41,68 $ | |
| AmazonGlobal-Versand | 23,38 $ | |
| Geschätzte Anzahlung für Importgebühren | 0,00 $ | |
| | ||
| Summe | 65,06 $ | |
{"desktop_buybox_group_1":[{"displayPrice":"41,68 $","priceAmount":41.68,"currencySymbol":"$","integerValue":"41","decimalSeparator":",","fractionalValue":"68","symbolPosition":"right","hasSpace":true,"showFractionalPartIfEmpty":true,"offerListingId":"5qRScuESOtgJZQdP4xTrJFsi2xFugF%2BNaSqtc1sUBES4w6LebrwP4tZhbfO29oM58kA18yzDFTrGbL7iV%2FCj%2BqOtHRetieuJvWKzqjwesQMfHBkPjFLA3NnASQ30hAjN6pJ1RVQEZgHIoEsW8n7JHw%3D%3D","locale":"de-DE","buyingOptionType":"NEW","aapiBuyingOptionIndex":0}]}
Kaufoptionen und Plus-Produkte
- Dieses leichte, langlebige Schild macht alles: reduziert Schall, absorbiert Vibrationen, schützt vor Strahlungswärme und bietet eine zusätzliche Schicht isolierender Polsterung
- Das Produkt verfügt über 100 % Kunstfaserfilz, der Klang- und Komfortkontrolle bietet, und eine High-Tech-Folien-Wärmebarriere, die mehr als 90 Prozent der Strahlungswärme bis zu 815 °C blockiert
- Thermo-Guard ist sehr einfach anzuwenden – es kann zugeschnitten werden, um überall zu passen; ideal für den Einsatz in LKWs, Wohnmobilen, Bussen, Autos, Flugzeugen und Häusern
- 0,64 cm dick, Thermoschutz für eine sehr hohe Leistung bei minimaler Dicke
- Passform: fahrzeugspezifisch
Kunden behalten diesen Artikel normalerweise
Dieses Produkt wird im Vergleich zu ähnlichen Produkten seltener zurückgegeben als der Durchschnitt.
Hinweis: Produkte mit Elektrosteckern sind für den Einsatz in den USA konzipiert. Steckdosen und Voltzahlen sind je nach Land unterschiedlich. So ist für dieses Produkt möglicherweise ein Adapter oder Konverter erforderlich, damit es an Ihrem Zielort genutzt werden kann. Bitte prüfen Sie vor dem Kauf die Kompatibilität.
Kaufe es zusammen mit

Dieser Artikel: Thermo-Tec 14130 Thermoschutz, 61 x 122 cm, einseitig
41,68$41,68$
Auf Lager
14,99$14,99$
Erhalte es bis Montag, 16. Dezember
Auf Lager
Gesamtpreis: $00$00
Um unseren Preis zu sehen, füge diese Artikel deinem Einkaufswagen hinzu.
Versuch es noch einmal!
Zum Einkaufswagen hinzugefügt
spCSRF_Treatment
Beide in den Einkaufswagen
Diese Artikel werden von verschiedenen Verkäufern verkauft und versendet.
Wähle Artikel zum gemeinsam kaufen.
4 Sterne und mehr
Seite 1 von 1Zum AnfangSeite 1 von 1
Verwandte Produkte zu diesem Artikel
Seite 1 von 1Zum AnfangSeite 1 von 1
Du suchst nach bestimmten Informationen?
Kundenrezensionen
4,5 von 5 Sternen
4,5 von 5
242 weltweite Bewertungen
- 5 Sterne4 Sterne3 Sterne2 Sterne1 Stern5 Sterne71%18%6%2%2%71%
- 5 Sterne4 Sterne3 Sterne2 Sterne1 Stern4 Sterne71%18%6%2%2%18%
- 5 Sterne4 Sterne3 Sterne2 Sterne1 Stern3 Sterne71%18%6%2%2%6%
- 5 Sterne4 Sterne3 Sterne2 Sterne1 Stern2 Sterne71%18%6%2%2%2%
- 5 Sterne4 Sterne3 Sterne2 Sterne1 Stern1 Stern71%18%6%2%2%2%
So funktionieren Kundenrezensionen und -bewertungen
Kundenbewertungen, einschließlich Produkt-Sternebewertungen, helfen Kunden, mehr über das Produkt zu erfahren und zu entscheiden, ob es das richtige Produkt für sie ist.
Um die Gesamtbewertung der Sterne und die prozentuale Aufschlüsselung nach Sternen zu berechnen, verwenden wir keinen einfachen Durchschnitt. Stattdessen berücksichtigt unser System beispielsweise, wie aktuell eine Bewertung ist und ob der Prüfer den Artikel bei Amazon gekauft hat. Es wurden auch Bewertungen analysiert, um die Vertrauenswürdigkeit zu überprüfen.
Erfahren Sie mehr darüber, wie Kundenbewertungen bei Amazon funktionieren.Rezensionen mit Bildern
5 von 5 Sternen
So far so good!
I used this to go around an area where I will be using a propane oven/stove (in a van conversion). I had already painted cement board with high heat grill paint and used high heat adhesive and aluminum tape to install this. I feel really good about it, it's just another layer of protection. I've only cooked with the stove in this area a couple of times but I feel good about it.
Vielen Dank für dein Feedback.
Leider ist ein Fehler aufgetreten.
Leider konnten wir die Rezension nicht laden
-
Spitzenrezensionen
Spitzenrezensionen aus USA
Derzeit tritt ein Problem beim Filtern der Rezensionen auf. Bitte versuche es später erneut.
Bewertet in den USA am25. Dezember 2018
Bewertet in den USA am27. Dezember 2023
Used it to insolate gravity feed gas tank that sits above exhaust manifold on 1950 tractor, worked perfectly.
Bewertet in den USA am7. Oktober 2015
Used to insulate the transmission tunnel on my 1998 Toyota 4runner. Easily cut the temperature in the cabin by 10 degrees on a hot summer road trip. I was amazed to see the difference between no insulation and this. Good product.
The Product I got was Gray and had no adhesive on it.
The Product I got was Gray and had no adhesive on it.
Bewertet in den USA am31. Dezember 2015
I originally purchased this to replace the insulation on my Jeep Wrangler when adding a new floor liner between the passenger and driver side of the center console. It was pretty easy to work with although you need a strong cutter or sharp scissors as the cloth material is pretty dense and can be hard to work with unless you have sharp tools. After having some issues with heat soak I decided to wrap some of this around my fuel rail and the troublesome injector and it appears to have helped reduce the affect of ambient heat on the fuel line as the rough idle and misfiring has stopped. The temperature has been around 70F outside so it will be interesting to see if I run into any issues over the summer with it. It also appears to have slightly improved fuel economy ever so slightly (nothing significant, perhaps much less than half a mile per gallon).
Pros:
Relatively inexpensive.
One roll should be more than enough for most vehicle/home applications.
Ease to work with (comes thick but you can simply reduce the amount of fiber by pulling a part from the backing)
Extremely high temperature threshold (1500F~)
Cons:
Need to be creative with how you apply it. Does not come with an adhesive side but get some double sided tape, aluminum tape, or zip ties and you should be golden.
Pros:
Relatively inexpensive.
One roll should be more than enough for most vehicle/home applications.
Ease to work with (comes thick but you can simply reduce the amount of fiber by pulling a part from the backing)
Extremely high temperature threshold (1500F~)
Cons:
Need to be creative with how you apply it. Does not come with an adhesive side but get some double sided tape, aluminum tape, or zip ties and you should be golden.
Bewertet in den USA am28. September 2022
Used the clips that came with our Onan RV generator to use this as replacement for the old factory insulation. Works great and less expensive than factory replacement
Bewertet in den USA am2. Juli 2016
I was skeptical when I bought it.
I am using this item to insulate my vinyl fence from the back of my pool heater.
When the heater is on, both the heater and fence are too hot to touch. The fence is 2 inches from the back of the heater and with the heat shield in place, there is no change in temperature of the reflective surface of the shield. It and the fence are actually cool. Unbelievable!
The product is great. Need to see how it stands up to the summer weather but would buy again if it doesn't weather well.
I am using this item to insulate my vinyl fence from the back of my pool heater.
When the heater is on, both the heater and fence are too hot to touch. The fence is 2 inches from the back of the heater and with the heat shield in place, there is no change in temperature of the reflective surface of the shield. It and the fence are actually cool. Unbelievable!
The product is great. Need to see how it stands up to the summer weather but would buy again if it doesn't weather well.
Bewertet in den USA am18. Januar 2021
Product came excessively well packaged. It is a dark gray color and not the pink in the seller photo. Of course, this has no effect on performance. Cut to size and adhered to sheet metal housing with aluminum HVAC tape.
Dimension was 24x48.25". Was easily cut with household scissors. Aviation/tinners snips also worked. Razor blade and straight edge cut the foil easily but left a tattered edge on the felt.
Dimension was 24x48.25". Was easily cut with household scissors. Aviation/tinners snips also worked. Razor blade and straight edge cut the foil easily but left a tattered edge on the felt.
5,0 von 5 Sternen
Color is wrong but it works great
Bewertet in den USA am18. Januar 2021
Product came excessively well packaged. It is a dark gray color and not the pink in the seller photo. Of course, this has no effect on performance. Cut to size and adhered to sheet metal housing with aluminum HVAC tape.Bewertet in den USA am18. Januar 2021
Dimension was 24x48.25". Was easily cut with household scissors. Aviation/tinners snips also worked. Razor blade and straight edge cut the foil easily but left a tattered edge on the felt.
Bilder in dieser Rezension
Bewertet in den USA am3. Oktober 2016
I bought this to use on the far side of a heat shield for the under seat muffler on the 06 CBR1000RR. I have a Bazzaz tuner that resides under there that I was worried about getting too hot (there's an air gap between the module and the heat shield but it gets pretty hot under there.) After 20 minutes on the track I could smell melting plastic. When I removed the tail section body work I found a major melted mess.
If this would have been in direct contact with the exhaust I would understand. Being that it was on the other side of a heat shield I was not very impressed. This would likely work well for sound and light heat (floor boards) but if your trying to insulate something that is a higher temp look elsewhere.
If this would have been in direct contact with the exhaust I would understand. Being that it was on the other side of a heat shield I was not very impressed. This would likely work well for sound and light heat (floor boards) but if your trying to insulate something that is a higher temp look elsewhere.
