TopoGrow LED Grow Tent Complete Kit LED 800W COB LED Grow Light Kit +48"X48"X80" Indoor Grow Tent + 6" Fan Filter Ducting Combo Hydroponics Tent System
- Make sure this fits by entering your model number.
- 800w Full Spectrum COB LED Grow Light kit: Actual Power Consumption: 210W , 4PCS*200W high intensityCOB(64*3W chip on board), view Angle: 120 degree Reflector , Spectrum of Light: 28pcs 660nm 16pcs 640nm;8pcs 440nm;4pcs 460nm;4pcs 470nm;2pcs 525nm;2pcs 730nm
- Grow tent: 96% highly reflective waterproof diamond Mylar, heavy duty 600D lightproof oxford cloth, diameter16MM white paint coated metal rods and 16MM plastic corners ,
- 6" fan &filter &ducting &combo: Filter/6" Flange: 18"H x 10"D, 950 Iodine Adsorption Value, Coal Based activated carbon; Fan/120V60HZ; 174Watt; 1.45A; 2780RPM; 460CFM; duct φ6" * 25FT, Galvanized steel Clamps
- Compared to normal LED grow light by secondary lens and normal single lens, our latest integrated COB of LEDs effectively improves much the color uniformity and luminous efficiency, which makes it more powerful in the vegetative stage and blooming stage of your plants, .Best Heat Dissipation for the Best Stability and Longest Lifetime
- Package: with three separated boxes, discreet package
Frequently bought together
Have a question?
Find answers in product info, Q&As, reviews
Your question might be answered by sellers, manufacturers, or customers who bought this product.
Please make sure that you are posting in the form of a question.
Please enter a question.
Compare with similar items
800w LED COB Grow Light kit
High PAR, Extremely Sufficient Lights Spectrum, Super Light Penetration
Enhanced spectral output covering full PAR (380-800nm) promotes photosynthesis for Growth & Blooming, Powerful Cooling fan system inside, Cool and Quieter
Revolutionary Heat Aluminum PCB, Run 80% cooler than high intensity discharge (HID) lights
All LEDs with a Zener to ensure One LED Goes Out the Rest Continue to Operate
3 years Long Life Span, Energy Saving and Environmental Protection
output Power: 800W
Actual Power Consumption: 210W
4PCS*200W high intensity COB(64*3W chip on board)
view Angle: 120 degree Reflector
9 Bands for Indoor Plants Growth & Flower
Spectrum of Light: 28pcs 660nm 16pcs 640nm;8pcs 440nm;4pcs 460nm;4pcs 470nm;2pcs 525nm;2pcs 730nm
Please note: separate from HPS/HID lamp. If not, LED grow light will burning out
96% highly reflective waterproof diamond Mylar
heavy duty 600D lightproof oxford cloth
Frame: 16MM (dia )white paint coated metal rods
16MM (dia) sturdy plastic connectors
Large heavy duty Zippers & Double Stitching for protection against light leaks.
Multiple vents for fan and filter output
6” Fan Filter Combo
18"H x 9"D
Iodine Adsorption Value: 950 (High efficiency)
1.5” Carbon Layer
Specific Surface Area: 900-1000 square meter per gram
Max. Endurable Temperature: 400 degrees Celsius (Safer)
Operating Environment Temperature: -20 to 65 degrees Celsius
zinc-anodized steel housing mesh
use Coal Based activated carbon
Changeable Velcro Pre-filter with 2 black elastic bands
Machine packed carbon enables 100% filtered air flow. Fan:
120V60HZ; 174Watt; 1.45A; 2780RPM; 460CFM
Come completely wired with junction box, strain relief and power cord
Fluted on both ends to receive ducting
φ6" * 25FT duct
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Update Replacement light that was sent after original one failed lasted less than 1 year in use. Two of the four bulbs are completely out on it. I would avoid purchasing this lighting option it two failures in a year and a half is too many.
Update: After initial posting seller got a hold of me. Amazon had provided incorrect contact information from them but once my initial review posted they emailed and offered to replace the light i had an issue on. They were very willing to work with me. New light expected today. not sure about life on the replacement yet but seller did make good on correcting my issue.
Thank you TopoGrow customer service.
Edit: 07-14-2020, got the grow house today! The assembly instructions leave a lot to be desired, so I'm going to see if there's a YouTube vid. I'll revise my review once I figure out how to assemble it.
Edit: 07-29-2020, grow house is completely set up and has been running for a couple of days. I really like the controller that came with the inline fan. It allows me to adjust how much air the fan pulls, which helps regulate how loud the fan noise is (the higher the pull, the louder the fan) and the temp inside the tent. The tent itself was pretty easy to set up with the very minimal instructions that came with it, but I would strongly recommend watching some YouTube videos if this is your first tent like it was for me.
I was able to easily fit six 5gal cloth pots in the tent. The fan and carbon filter were a little heavy and unwieldy to get set up on the overhead support bars, but I don't have very big hands or a lot of upper body strength. I was really glad I had a bag of zip ties on hand to help secure everything and to keep all the cables nice and tidy. As far as the set up goes, my biggest complaint is that there is almost no instructions on how to set up all the accessories. I'm brand new to this and it's not as intuitive as they make it seem. I'm still trying to figure out how to program the temp/humidity gauge and the light timer. I had a very hard time getting the ducting over the fan and carbon filter ports and ended up using Gorilla tape instead of the clamps. I have it venting out a window and am happy to say that there is no smell at all in the room or coming out the exhaust duct outside of the window. My plants are still young, so we'll see if it works as well when they get closer to harvest.
Unfortunately, one of the bulbs in the LED display is not working. The bulb doesn't light up and the fan doesn't turn. Still working on getting this resolved.