UPair One Drone with 2.7K HD Camera, 5.8G FPV Monitor Transmit Live Video, 2.4G Remote Controller, GPS Auto Return Function, a key to Return, Beginners Quadcopter Drone
We don't know when or if this item will be back in stock.
- Enter your model number to make sure this fits.
- 7-inch LCD Screen,2.7K Camera Gimbal,Advanced Intelligent Battery,15 mins flight time enabled.Wait to cool the drone every 10mins' flight.
- 600mw Video transmission and receiver blocks, Max.600M FPV range.Stick a laptop heatsink on the silver box to reduce heat.
- Home point was successfully recorded and the compasss functionally normally,aircraft can return to home when GPS signal is strong.
- Drone battery only calculate the voltage while ignore the return distance.The user should always note the return distance and battery voltage by himself.
- UPair One is totally different from UPair One PLus. United States Hotline:888-853-2218
Customers who bought this item also bought
Customers who viewed this item also viewed
Have a question?
Find answers in product info, Q&As, reviews
Please make sure that you are posting in the form of a question.
UPair Drone FAQ
1.How to charge 5400mAh drone battery and 1500mAh controller battery?
-A: Connect one end of the charger to the power flight battery, note “UPair"logo of the charger should face the top to distinguish the “male””female” of the connector. Otherwise the battery might get short circuit.
*Don’t charge the remote controller battery and the flight battery at the same time.
*3-4hrs to charge the 5400mAh drone battery, 1.5hrs for the controller battery.
*When charing, the charger light is red, which turned to green after charging finished.
2.After fully charging, how to fly the UPair One ?
-A:1.Choose a wide open area to fly the drone, no trees, less radio interference. Upair One compass can be greatly effect by magnetic flying environment.
2. Switch Postion Hold mode, search more than 9 satellites to get a full GPS lock before take-off .Wait 3-10mins to pick up satellites to get a full GPS lock.
3.Why the video transmission block silver box extremely hot?
-A:The video transmission blocks are 600mw and produce the heat. Use a computer heatsink stick on the silver box which can help to cool the silverbox.
Don’t fly the upair drone continuously. Take a test over 10mins flying time.
4.How to use “return to home” function properly?
-A:Under Position Hold mode, if the Home point was successfully recorded and the compass is functioning normally, switch to RTH mode, the aircraft will return to home. Aircraft cannot return to home when GPS signal is weak.
The default height of RTH is 15M. When the height is less than 15M, if RTH triggered , the drone will bounce to 15M height before return, please don't be panic.
5.How to use ”Low battery return” correctly?
-A:When the voltage is lower than 10.6V, it will return with a default height 15M. It's normal it will climb to 15m if your current height's low. Since it's designed only considering the voltage, which doesn't calculate the return flying distance.Don't only rely on the low-power function !!! Please calculate the return distance and battery power by your self at most time.
6.How to Link the UPair controller and the aircraft if 4 motors couldn’t be unlocked?
-A:*Keep the Remote controller and Aircraft power off,remove 4 propellers for safety.
1.Toggle the left switch down to "Return to Home" mode.
2.Pull the left throttle stick to the bottom right,hold it and turn on the controller at the same time,
You will hear a beeping sound when remote controller is trying to link to the aircraft.
3.Power on the Aircraft ,within few minutes the “beep beep”sound will stop,which indicates you have now finished linking the remote controller and the aircraft.
4.Toggle the left switch up to the "Normal-mode",now you can successfully unlock the motors.
7 Camera blue light on and powered properly, why no video image on the FPV screen?
-A:If the camera has blue light on, it is working fine. Please calibrate the frequency of the video transmission channel to get the video back.
Power on the aircraft and the controller. Press the black button at the back of the RC controller for 3~5 seconds for 8-10 times to reset the video channel.
8.Camera NO blue light, not powered, no video on the fpv screen, what to do?
-A:If camera blue light not on, the camera doesn’t work possibly the harness plug was knocked loose. Please remove 4 black rubber vibration dampening balls and detach the gimbal. Check if the wires connection messed up. Then reconnect the plug and remount the gimbal. The issue should be solved by this.
9. Why the screen show”no SD card”?
-A:Please use a CLASS 10 high speed micro sd card to insert to the camera. If still showed”no SD card”, please try to format “exFAT” the micro SD card
10.Why sometimes the motors spinning and couldn’t be locked after landing?
-A:If the landing area isn’t stable or the aircraft landed rapidly, the compass couldn’t be immediately responded, the motors may couldn’t be locked. Please choose a different area to land the drone.
*11-Any question, please send message to seller "G10Drone".
*12-Call UPair manufacturer US office 888-853-2218 if you need any tech support or maintence service.
Total Weight: 1350g
Max flying distance: 800m
Max video transmission distance: 500m
Max flight height: 300m
Propeller: 9450,match DJI Phantom3 propeller
Flying duration Full-load(1350g): 18mins
Controllable Rotation range − 30° to +90°
Accuracy of angle control ±0.2°
Maximum controlling rotational velocity 15°/s
Voltage : 11.1V
Sensor: 1/2.3"CMOS；Max. at 8MP
Lens FOV=100, low distortion
Max. photo resolution
Maximum at 8MP
Photo Shooting Mode: Single shot
Recording Resolution: 2.7K@30FPS
Power supply voltage: USB 5V
Video Compression Format H.264,4K2K MJPG
SD card type: Micro SD card 16G or 32G/C10 high speed card
Working Temperature: -10℃ to +50℃
Photo format: JPG
Video format: MP4/MOV
Capacity: 5400 mAh
Battery type: Lithium
Working temperature: 0°C to 40°C
Charging time 1~1.5h
Working frequency 2.4GHz
Max. communication range(in open field) 800 M
Working temperature: 0°C to 40°C
Controller Battery : 1500mAh
Current /voltage : 0.8A/11.7V
FPV screen: 7 inch
1x UPair One Aircraft
1x Gimbal+2.7K Camera
1x 5400mAh Power Battery
1x 2in1 Charger
1x 1500mAh Controller Battery
1x Remote Controller+7"FPV Monitor
2 set x Propellers
1x User Manual
Compare to similar items
|Shipping||—||FREE Shipping||FREE Shipping||FREE Shipping||FREE Shipping||FREE Shipping|
|Sold By||—||Amify FKA Bois Blanc Supply||YY drone||Electronic Express||AAA Mart||Mifly Drone|
|Item Dimensions||—||8.66 x 8.66 x 2.75 in||—||5.51 x 14.57 x 14.57 in||—||11.81 x 11.81 x 7.87 in|
|Item Weight||—||3 lbs||—||3.1 lbs||—||17.4 lbs|
Top customer reviews
There was a problem filtering reviews right now. Please try again later.
Customer service has been very prompt and helpful with some questions we had.
Product and company have shown great value well beyond the price we paid!
Most recent customer reviews
Now I have 6 other drones much more complicated than this...Read more
It's very well made and fun to fly.
I just got the UpAir One Plus as well.Read more