Buy Used and Save: Buy a Used "SINGER Futura XL-400 Computerized Sewing and Embro..." and save 50% off the $899.99 list price. Buy with confidence as the condition of this item and its timely delivery are guaranteed under the "Amazon A-to-z Guarantee". See all Used offers.
Other Sellers on Amazon
+ Free Shipping
+ Free Shipping
+ Free Shipping
SINGER Futura XL-400 Computerized Sewing and Embroidery Machine with 18.5-by-11-Inch Multihoop Capability Including 2 Hoops, 125 Embroidery Designs, 5 Monogramming Fonts
|You Save:||$273.54 (30%)|
- Enter your model number to make sure this fits.
- Create and edit embroidery designs on your PC using the included software then transfer them to the Futura XL-400 via the included USB cable
- Easy-on extra-large 10-by-6-inch embroidery hoop with multihooping capability
- 125 built-in embroidery designs with five fonts and outline lettering
- SwiftSmart threading system with Drop & Sew bobbin system makes for the easiest set-up
- 30 built-in sewing stitches with two fully automatic one-step buttonholes. 110 volt machine designed for United States and Canadian use only.
Frequently bought together
Customers who bought this item also bought
Special offers and product promotions
From the manufacturer
The SINGER Futura XL-400 is the next generation in the Futura line of sewing and
The SwiftSmart threading system with automatic needle threader makes set-up virtually effortless. The Drop & Sew bobbin system allows you to load and change the bobbin in no time without the need to pick up the bobbin thread. Six StayBright LED lights keep your extra-large sewing space well lit when working on big quilting and sewing projects. This sewing and embroidery machine has 30 popular built-in sewing stitches with two fully automatic one-step buttonholes and also boasts 125 built-in embroidery designs with five fonts and outline lettering.
With a larger embroidery hoop option (10-by-6-inches) and multihooping capability, you can create designs up to 12 by 20 inches. This fantastic feature and will allow you to embroider large format projects such as table cloths, bedspreads, dresses and more. Get the same quality embroidery results as high-end embroidery machines but at a fraction of the cost by using your own PC. Simply connect your PC to the Futura XL-400 sewing and embroidery machine via the included USB cable, use the included software with built-in tutorials, and send the design to the machine. Push a button and you're embroidering.
Create designs as big as your imagination with multi-hoop capabilities that allow you to embroider designs up 18-1/2 by 11 inches.
Basic Editing of All Designs
Customize your embroidery on your computer screen.
125 Embroidery Designs Included
A large selection of embroidery designs to get you started right away.
6 STAYBRIGHT LED Lights
Fills the sewing surface with light, making it easier to view your work and eliminating eye strain
Swift Smart Threading System
Simply guide the thread directly from the spool to the needle area through a single groove and thread the needle by pressing the threading lever for easy needle threading.
Drop and Sew Bobbin System
No need to pull up the bobbin thread manually. Simply insert the bobbin, place the thread in the channel and start sewing.
Extra Large Sewing Space
The arm length to the right of the needle is 210 mm (8 ¼”) which gives more space for quilts and other large projects.
Design File Compatability
The included embroidery software will read these design file types: FHE, XXX, JEF, CHE, HUS, PES, DST, SHV, PEC, EXP, VIP, PCS, PSW & SEW.
SINGER is Sewing Made Easy
Basic Editing of All Designs
Customize your embroidery on your computer screen. Combine multiple designs into one design file and add lettering to personalize your embroidery. Select custom colors for your threads. The software includes thread charts with color numbers for the most popular brands of embroidery thread. Rotate embroidery designs in one degree increments for perfect placement and design possibilities. Flip embroidery designs horizontally and/or vertically or repeat embroidery designs for even more creative possibilities. Resizing capability allows you to reduce or enlarge the embroidery design for use on any project.
Lettering Program with 5 Fonts
Select from 5 embroidery fonts to personalize or monogram your projects. Letters can be sized, rotated and shaped with 30 lettering frames such as arc, banner, wave and more.
3D Realistic View and Print Capabilities
Stitches appear on the computer screen exactly as they will sew. Print the design to create placement templates.
- PC with 1 GHz Intel or AMD Processor.
- Windows OS: Windows XP/ Vista/ 7/ 8/ 8.1.
- 1 GB of RAM (or more recommended).
- CD-ROM Drive.
- 500 MB (or more recommended) of Available Hard-Disk Space for Installation.
- Color Standard (1024 x 768 Pixel; 65,000 Colors Recommended) VGA Adapter Connected with a Color VGA Monitor.
- Microsoft Compatible Mouse.
- USE 1.1/ 2.0.
|Built-In Stitches||30 Built-In Stitches||215 Built-In Stitches||215 Built-In Stitches|
|Included Embroidery Designs||125 Embroidery Designs||125 Embroidery Designs||250 Embroidery Designs including 50 Endless Designs|
|Embroidery Hoops Included||Large Hoop and Small Hoop||Large Hoop and Small Hoop||Large Hoop, Small Hoop, and Endless Embroidery Hoop|
|Bonus Software Included||✓||✓|
The SINGER Futura XL-400 is the next generation in the Futura line of sewing and embroidery machines. The SwiftSmart threading system with automatic needle threader makes set-up virtually effortless. The Drop & Sew bobbin system allows you to load and change the bobbin in no time without the need to pick up the bobbin thread. Six StayBright LED lights keep your extra-large sewing space well lit when working on big quilting and sewing projects. This sewing and embroidery machine has 30 popular built-in sewing stitches with two fully automatic one-step buttonholes and also boasts 125 built-in embroidery designs with five fonts and outline lettering. With a larger embroidery hoop option (10-by-6-inches) and multihooping capability, you can create designs up to 12 by 20 inches. This fantastic feature and will allow you to embroider large format projects such as table cloths, bedspreads, dresses and more. Get the same quality embroidery results as high-end embroidery machines but at a fraction of the cost by using your own PC. Simply connect your PC to the Futura XL-400 sewing and embroidery machine via the included USB cable, use the included software with built-in tutorials, and send the design to the machine. Push a button and you're embroidering. Computer requirements: personal computer with 1 GHz Intel or AMD Processor, Windows OS: Windows XP/Vista/7, 1 GB of RAM (or more recommended), CD-ROM Drive, 500 MB (or more recommended) of available hard-disk space for installation, color standard (1024 by 768 pixel, 65,000 colors recommended), VGA adapter connected with color VGA monitor, Microsoft-compatible mouse, USB 1.1/2.0
Top Customer Reviews
As with any technological product (no matter if its a cellular or a sewing Machine) there's a learning curve for it. Do research, read manuals, ask around.
I did a ton of research before buying this particular model. It could sew and embroider. most of the machines just came with either 4x4 hoops or 4 x 4 and 5 x 7 hoops. the large hoop for large projects are a plus. and last but not least, the price range of it, compare to other brands that do the same was the selling point hundred of dollars less than the others. WOW.
- The sewing/embroidering part is big, yes BIG, making quilting or sewing big projects easier. But if you did a little research on this particular machine, you already knew it was big and that you will need ample space for it. When in sewing mode, its not bigger than any regular sewing machine, but with the embroidery arm attached this thing is huge, as to accommodate the big hoop that came with it.
Mine is sitting on a desk by itself and my regular sewing machine and serger are in another desk.
- Its very bright, which means that working on it is less of a task, more of a joy.
- Include most of the presser feet you might need to start any project right away. - A beautiful selections of stitches lost of stitches to task and embellish your fabric. its true, there are not hundreds of them, but there are plenty.
- making button hole is easier.
- Threading system helps those of us that struggle with needle eye :-)
-Right out of the box, it comes with a software that allows you to do a ton of embroidery designs included. the hoops, 4 x 4 and 6 x 10 were the most easy to install that I have tested. just snap on place and ready!
- there's a certain order to do things to avoid mistakes that are "user error", not machine related. and that's why there's a manual for it. manuals are your friends, READ THEM!
-it includes designs both small and big to be used right away and you can download more via internet
- it read all design formats: PES, HUS, DST, VP3, FHE, etc, although XXX is Singer native.
- Speed control, back up and forward stitch buttons, to customize your user time, as fast/sow as you want, back up to restitch or forward to skip ahead.
I do have cons, but all of the fixable.
- the spool stand that comes on the machine, its a common complain. i don't know what it is, but thread tends to tangle on the path, making for the breaking threads and needles. a thread stand behind the machine solve it. Or, as i heard from many users, putting the spool in a cup behind the machine works wonders.:-)
- it says to sew with the tension on "s" and embroider with it on "E". you will soon learn that you need to adapt this as tension relate to fabric and thickness of it. I embroider with it a little on top of the "E" and a little below the "S" for sewing.
- The software that comes with it is as simple as it gets. you can create sayings and re-size designs, change colors, and that's it. But again, i knew this. I knew that Singer sell additional software for it. ALL machines come with this type of software unless you buy them with a bundle. You want to do more? prepare to pay more.
Final thought: embroidery doesn't come cheap. Not even closed. Whether you want to create a small business or be creative around the house (my case) you are going to be buying LOTS and LOTS of stuffs: the special thread (I get mine here, poly Threadart brand, and Metro from their site.), stabilizers (all kinds: cut-away, tear-away, water soluble), needles, more designs, and if you want to be creative, additional software that will allow you to create or modify designs (I use Wilcom and Embird).
Need help? there is plenty of it on the web, including great support pages, forums and groups (I belong to 2 amazing ones on Facebook)
I love my XL-400 and will recommend it 100% to my friends or anybody willing to hear me. Sorry if other haven't had a great experience with I will advise to have patience and READ THE MANUAL! :-)
P.S. November 5th, 2012: I added a few pictures of projects I have completed with my XL-400. I have found out that some designs might look pretty but doesn't embroider as well as others. same thing for the type of thread, bobbin thread and stabilizers yo choose.
P.S. 2 January 11th, 2013: since people keep asking me and repeating their cons, I thought I add some points:
- You need a PC/laptop in order for this machine to embroider (not to sew)but you can use the software without the machine, after you turn it on and open the software, just turn the machine off and use the software.
- The included software is not an elegance program but instead of a tiny LCD screen you get a big one (as big as your laptop/PC screen) that let you work on your design right there.
- I have several machines and a serger (brother, viking and singer) and all of them have a small space for feet change, not just the embroidery machines, but the sewing also. and the XL-400 is the taller of them all (well, except for the quattro, but that a league of its own)
- It doesn't have speed bobbin control. I have never seen a machine with speed bobbin control. guess never need it, since all machine ideally come set to wind bobbin as tight as required.
- about the thread breaking, I did mention that (happens to me in my brothers also) and mentioned also the cup technique and the ease of a thread stand. I use it as 3/4 of the speed, never less, never more, never a problem. try a diff brand of thread. What work for me, might not work for you and vice-versa.
-The noise emitting from the machine, this I can not say anything since mine its not quiet but I don't find it THAT loud either ( inserting the bobbin upside down, since 15J bobbins have one side curve and the other straight, increase the sounds AND the breakage, but since it is user error, is fixable ;-)
- "DOES NOT INCLUDE AUTOMATIC THREAD CUTTER" no, really, it doesn't, it never said it did. get a tiny embroidery scissor, a curve scissor or a duck scissor. or all three! you can never have too many scissors.
- the hoops are flat and plastic. take care of them.
me? still in love with my machine...
P.S. 3 February 13, 2013: Apparently Amazon had a bad batch of these machines. They even put up a message that they were reviewing/revising the machines they had in stock.
Sorry for those that got one lemon machine.
I still hold unto my review of MY machine as an excellent one, worth getting it.
P.S. 4 April 6, 2014: still in love with my machine... adding a special note, although it only works with the includes size hoops, 4x4, 6x10, you can multi-hoop, meaning that you can do even larger designs. here is a pdf and a site with some info about it: sewingmachinesplus (dot)com/media/products/singer/Singerxl400/package/How-to-Multi-Hoop-Futura.pdf and jennys-sewing-studio (dot)com/index.php/product-lines/singer-futura-quartet/75-singer-futura-quartet/138-multi-hooping-with-the-singer-futura-quartet.html Amazon wont let me attach links but substitute (dot) for an actual dot and it should work! hope this help!
P.S. 5 February 26,2016: yes, still in love with my machine. Running like the first day. But do keep in mind that for this machine, or any machine, regular maintenance checkups and cleaning is a must. Do as the manual says, keep it clean, covered when not in use, regularly change needles, and use the appropriate one according to the fabric and project - you can always revert to e regular one- since this will impact in the finished design; if you have thread breakages, check for loose pieces within the machines to avoid future entanglements. Check for warped hoops, avoid the embroidery arm bumping with anything, replace a crack bobbin, and keep the bobbin area lint free, do a visual check on parts, like the needle plate, as a bend needle migh hit this and brake (or worse damage your project or flight straight to you!). Replace threads if they are old as they tend to dry and brake easily. If, by any circumstances, you need to remove a part whether is to check something or retrieve a fallen needle or thread, please pay attention so you can install everything back to the right place.
* am I missing anything else? Hope not...*
UPDATE NOV 2015: I suppose that after reading all of the negative comments about this machine I may have been one of the lucky ones. As I posted when I first got this machine, there were quirks, but once figured out, this turned out to be a great embroidery machine for the casual embroidering that I enjoy. Perhaps if I were inclined to spend over $1500 for a machine I would upgrade to a Janome or Bernina but for my purposes, this machine has been top notch. what I love about this machine after so long a time of ownership is the larger hoops, it does a beautiful straight stitch and the ability to plug in to my computer and download images. I have successfully embroidered dozens of jackets, aprons, quilt tops, have done quilting and general sewing and it has turned out to be an all around good machine. Yes, singer customer service sucks. I would rather search the internet for answers than talk to a person anyway, so my two phone calls to them in the beginning were worthless and I found answers on my own. I did not drop $$ on this machine to give up so easily. Anyway, 2 years later and not disappointed in this machine at all.
Let me begin with background to establish my experience and validity of this review. I have been sewing for 27 years - I have used Singer machines made in 1931 all the way through the 21st century. I make clothing, quilts, crafts, home accessories and household items, as well as alter/tailor those same items. I know how to repair basic malfunctions of a sewing machine. Embroidering is completely new to me. With that said here goes.
I purchased this machine because it has been 16 years (yes she said 16) since I have owned a NEW machine. All of my machines (9 of them) have been given to me by frustrated people who didn't have the time or inclination to be patient with this craft and their instrument to accomplish their objective - have fun sewing. For me, after two months of ownership, this is a GREAT machine. I needed a machine that would do basic stitching, buttonholes, give me a large quilting area and now embroidering. Because I am new to this piece, I did not want to spend thousands of dollars on a machine to find out it was not for me.
As others have said, yes there is a learning curve. I am a computer geek, but this software is not so difficult that you cannot literally take the machine out of the box and sew. It is very very basic. I did months and months of research and knew that I was not getting all the preloaded software required to do more complex embroidery - again, i would rather pay as I go and learn. READ THE MANUAL! It took me about 2 hours to read the manual, play around with different aspects of the funtionality. Took me about 1 hour to learn how to do basic embroidery. I think that is a fairly decent curve.
I have discovered that not all embroidery is equal. smaller designs mean slow down the speed or yes, the thread will break, the needle will jam, etc. Yes you have to use the right stabilizer - not all material is created equal. YES, you have to use the right needle - just like with regular sewing, the right size needle means more effective sewing with less trouble. I can only imagine the people complaining about thread breakage, jamming, etc. are not looking at ALL of the items that make for good output. Just like you can't sew jeans with a number 9 needle, you can't embroider a fabric with more stretch than a standard cotton with the same needle. Your thread will break. It's common sewing sense.
For whatever reason, yes occaisionally the software will say the hoop size is different than what you have - so what. You just click continue and it fixes itself. It does not mean you can't sew a beautiful design. This only happens to me on the basic installed software that came with the machine, not the Autopunch or Hyperfont. So am thinking it is a flaw in the software, not the machine.
As far as the stitching - the lines are consistent, evenly spaced, easily adjustable, and it is quiet. If i had issues embroidering where the stitches skipped or something puckered - that is operator error, due to sewing too fast, or not using the right stabilizer. If I fix me, the machine does what it is supposed to do.
Multihooping takes practice - again, not the fault of the machine, it is an operator error. READ THE DANG INSTRUCTIONS people.
LOVE LOVE the fact that it has a large hoop, means less multihooping generally needed.
One glitch i had, and not sure why, after using the reverse button, a clunking noise started happening. I ultimately opened up the bobbin hook, jiggled some stuff around, maneuvered the needle up and down and it corrected itself. I don't know why this happened except maybe i reversed back and forth to quickly and didn't give the machine time to catch up. It has not done it again but i will keep an eye out for it. This was the ONLY issue I have had that was maybe machine related.
The large opening has allowed me to quilt beautifully without all the struggle i have had with other machines that have a smaller area. this is a huge plus and one of the reasons i decided on this machine. Yes the machine is big, but I read the specifications before I purchased. Hmmm.. imagine that - reading about the product. Amazing things can happen if one reads stuff.
Overall, yes I would recommend this machine. Yes there is a learning curve, yes you have to be patient. But this can turn out beautiful products, and do all your basic sewing as well.
UPDATE FEB 7, 2013
Funny - I had a very negative comment under my review that disappeared. I was preparing to respond. Anyway, I have had this machine now for about 4.5 months. Maybe i have been lucky or more patient than others, this is still an excellent machine. I will say again, as I did before, when I do things out of order, or get impatient, the error messages show up on the machine. I have had not problem correcting/bypassing/ignoring them.
I have downloaded designs from various websites and have had no problem with the software accepting the ones I have chosen. My favorite so far has been embroiderydesigns.com. I have found that the quality of the end results depends a lot on: thread, stabilizer, speed, quality/age of needles. I would not expect this to be any different from any other machine although I cannot compare.
Some things I have learned:
1. thread breaking: this happened to me, i rethreaded, got the message again, rethreaded, again. etc. I am not afraid to open up the guts of a machine. What I learned, since this was new to me on the single thread through the enclosed top part of the machine, my thread broke and i pulled out what i thought was the remnant. However, there was a piece left inside. Therefore, the software/machine kept reading it as a thread break. Once i cleared it, I did not have the message again.
2. stupid clunking: this seems to be an enigma with the bobbin holder. Every once in awhile i have to unscrew the plate, pull out the bobbin, clean out the "rabbit fur" as my daughter calls it, put it all back, and it is fine. Small annoyance but I can move past that - the machine is super quiet when sewing a regular stitch, which I love. It also does fantastic general stitching overall.
3. Wrong hoop size: this is happening for me if I try to work the steps of embroidery for this machine out of order. But i can hit escape and it goes away. Trying to figure out how it does not go away, as people have complained and I can't make it stay there, so i really have no solution, although I was hoping to find a miracle answer.
4. YES! join the yahoo group! those folks have been at this longer than new owners and have figured out the quirks.
5. Invest in the software add ons in small bits at a time. This is critical. There is a learning curve with every piece of this machine software. Buy too much at once and you will be overwhelmed.
6. Design from scratch - this is what I love the most. I have been able to import graphics - from our church, clubs, etc. - and create beautiful designs to make as patches, logos, gifts. This has been the most surprising benefit for me, and so much fun for all in receipt of the end result. but this takes patience in editing and design. You can be a computer whiz, like some others have reported, but the design and function of THIS machine take a learning curve. I don't know how many times I can stress this fact.
I will update again, but for now, after an extended period of use, I have NO regrets about the purchase of this machine. I wish others could love it as much. Blessings for now!