| RAM | 480 GB |
|---|---|
| Hard Drive | 1 Hybrid Drive |
XPG SX8200 480GB 3D NAND NVMe Gen3x4 M.2 2280 Solid State Drive (ASX8200NP-480GT-C)
We don't know when or if this item will be back in stock.
| Digital Storage Capacity | 480 GB |
| Hard Disk Interface | ATA-4 |
| Connectivity Technology | SATA |
| Brand | XPG |
| Special Feature | Portable |
| Hard Disk Form Factor | 2.5 Inches |
| Hard Disk Description | Hybrid Drive |
| Compatible Devices | Desktop |
| Installation Type | Internal Hard Drive |
| Hard Disk Size | 1 |
About this item
- 64-layer 3D NAND
- PCIe NVMe 1.3 Qualified Gen3x4
- Form Factor: M.2 2280
- Read/Write Speed up to 3200/1700 MB/s (Performance may vary based on system hardware & configuration)
- PCIe/NVMe is NOT compatible with SATA III interface – please check your system specifications for supported SSD interface
Customers also viewed these products
Important information
To report an issue with this product, click here.
Compare with similar items
This item XPG SX8200 480GB 3D NAND NVMe Gen3x4 M.2 2280 Solid State Drive (ASX8200NP-480GT-C) | XPG SX8100 2TB 3D NAND NVMe Gen3x4 PCIe M.2 2280 Solid State Drive R/W 3500/3000MB/s SSD (ASX8100NP-2TT-C) | ADATA XPG SX8100 512GB 3D NAND NVMe Gen3x4 PCIe M.2 2280 Solid State Drive R/W 3500/3000MB/s SSD (ASX8100NP-512GT-C) | XPG SX8100 4TB 3D NAND NVMe Gen3x4 PCIe M.2 2280 Solid State Drive R/W 3500/3000MB/s SSD (ASX8100NP-4TT-C) | SAMSUNG 970 EVO Plus SSD 1TB NVMe M.2 Internal Solid State Hard Drive, V-NAND Technology, Storage and Memory Expansion for Gaming, Graphics w/ Heat Control, Max Speed, MZ-V7S1T0B/AM | WD_BLACK 2TB SN850X NVMe Internal Gaming SSD Solid State Drive - Gen4 PCIe, M.2 2280, Up to 7,300 MB/s - WDS200T2X0E | |
|---|---|---|---|---|---|---|
| Customer Rating | 4.6 out of 5 stars (313) | 4.4 out of 5 stars (1526) | 4.3 out of 5 stars (11) | 4.4 out of 5 stars (1526) | 4.8 out of 5 stars (51835) | 4.8 out of 5 stars (26373) |
| Price | Unavailable | $99.99$99.99 | $69.99$69.99 | $329.99$329.99 | $49.99$49.99 | $119.99$119.99 |
| Sold By | — | Quality Photo | Quality Photo | ADATA | Amazon.com | Amazon.com |
| Compatible Devices | Desktop | Desktop | Desktop | Desktop | Laptop | Laptop, Motherboards |
| Data Transfer Rate | 3938 Mb per second | 3500 Mb per second | 1 Mb per second | 3500 MB per second | 3500 Mb per second | 7300 MB per second |
| Digital Storage Capacity | 480 GB | 2 TB | 512 GB | 4 TB | 1 TB | 2000 GB |
| Hard Disk Form Factor | 2.50 inches | 2280.00 inches | 2.50 inches | 2280.00 inches | 2.50 inches | — |
| Hardware Interface | Express Card | Solid State Drive, PCIE x 4 | Solid State Drive, PCIE x 4 | Solid State Drive | PCI Express x4 | Solid State Drive |
| Hardware Platform | PC | Mac | Mac | Mac | PC | — |
| Item Dimensions | 0.87 x 3.15 x 0.14 inches | 3.15 x 0.87 x 0.14 inches | 3.15 x 0.87 x 0.14 inches | 3.15 x 0.87 x 0.14 inches | 0.87 x 0.9 x 3.15 inches | 3.15 x 0.87 x 0.09 inches |
| Item Weight | 0.28 ounces | 0.30 ounces | 0.28 ounces | 0.30 ounces | 1.90 ounces | 0.26 ounces |
| Model Year | 2018 | — | — | — | — | — |
From the manufacturer
XPG SX8200 PCIe Gen3x4 M.2 2280 Solid State Drive
The SX8200 M.2 2280 SSD is our fastest SSD to date, designed for PC enthusiasts, dedicated gamers, and overclockers.
It features an ultra-fast PCIe Gen3x4 interface, offering sustained peak R/W speeds of 3200/1700MB/s, outpacing SATA 6Gb/s by a huge margin. WIth NVMe 1.3, the SX8200 delivers superior random read/write performance and multi-tasking capabilities.
With SLC Caching, DRAM Cache Buffer, and LDPC ECC technologies, the SX8200 maintains high speeds and data integrity during even the most intense gaming, rendering, overclocking, and other high demand applications.
Disclaimer:
Form Factor PCIe NVMe M.2 is not compatible with SATA M.2. Please check your system spec before purchase.
- Ultra-fast PCIe Gen3x4 interface: R/W speed up to 3200/1700MB/s
- NVMe 1.3
- Second generation 64-layer 3D NAND Flash
- Advanced LDPC ECC Technology
- SLC Caching and DRAM cache buffer
- RAID Engine and Data Shaping
- Compact M.2 2280 form factor–ideal for gaming notebooks and high-end desktops
|
|
|
|
|---|---|---|
Breakthrough the Barrier of Speed- Rapid PCIe Gen3x4 interface: read/write up to 3200/1700MB/s. - NVMe 1.3. - 2nd Generation 64-layer 3D NAND Flash: Higher capacity, durability and power efficiency. - M.2 2280 form factor: supports desktops and notebooks with the latest Intel and AMD platforms. - Built for pros: ideal for gamers, PC enthusiasts, overclockers, and video rendering professionals. |
Supports LDPC ECC for Increased Data IntegrityThe SX8200 supports LDPC (low density parity check) error correcting code technology to detect and fix a wider range of data errors for more accurate data transfers and a longer SSD lifespan. |
Intelligent SLC Caching and DRAM Cache BufferImplementing 32bit DRAM data bus, intelligent SLC Caching and DRAM cache buffer, the SX8200 can accelerate sequential and 4K random read/write speeds to shorten system response time, which especially suitable for multimedia editing and gaming. |
Looking for specific info?
Videos
Videos for related products

6:23
Click to play video

Asus Prime Z590M-PLUS & Team Group Memory Unboxing/Config
Systematic Hardware

Videos for related products

2:58
Click to play video

WD_Black SN850X PCIe 4.0 NVMe SSD - Installation & Benchmarks
5after12

Videos for related products

1:24
Click to play video

How to install it by a Certified Computer Repair Technician
Egghead Fixers

Videos for related products

3:10
Click to play video

13400 & 3060 Benchmarks - EPIC 1440p Gaming PC Build!!
SuperDan

Videos for related products

3:56
Click to play video

SABRENT 4TB External SSD Review USB 3.2 10Gbps
Ersbit

Product information
Technical Details
| Brand | XPG |
|---|---|
| Series | XPG SX8200 |
| Item model number | ASX8200NP-480GT-C |
| Hardware Platform | PC |
| Operating System | Windows XP, Vista, 7, 8, 10, Mac OS 10.10 and Linux Fedora version 15 or later |
| Item Weight | 0.282 ounces |
| Product Dimensions | 0.87 x 3.15 x 0.14 inches |
| Item Dimensions LxWxH | 0.87 x 3.15 x 0.14 inches |
| Flash Memory Size | 480 GB |
| Hard Drive Interface | ATA-4 |
| Hard Drive Rotational Speed | 1 |
| Manufacturer | XPG |
| ASIN | B07BLMP9ZT |
| Is Discontinued By Manufacturer | No |
| Date First Available | March 26, 2018 |
Additional Information
| Customer Reviews |
4.6 out of 5 stars |
|---|---|
| Best Sellers Rank | #2,718 in Internal Solid State Drives #29,829 in Computer Internal Components |
Warranty & Support
Feedback
Product Description
Faster and Better - The Next Generation SSD XPG SX8200 PCIe M.2 2280 Solid State Drive is our newest addition to our gaming family. SX8200 features 2nd Gen. 64-layer 3D NAND technology and ultra-fast PCIe Gen3x4 interface, offering sustained peak R/W speeds of 3200/1700MB per second, almost 6 times faster than 2.5 inch SATA III 6Gb/s SSDs. With NVMe 1.3 qualified, SX8200 delivers superior 4K Random (IOPS) speed up to 310K/280K , making it ideal for gaming, data analysis, graphic and video editing, and other demanding applications. Additionally, SX8200 also features SLC Caching, DRAM Cache Buffer, and LDPC (Low density parity check) ECC technologies to ensure the integrity of your data under every heavy task. And to further protect your data, SX8200 also supports AES 256-bit encryption, RAID Engine, and Data Shaping. Longer Warranty for a Happy Owner Experience Backed by 5 year warranty, SX8200 offers exceptional durability and data security, boasting an endurance rating of up to 640 TBW (terabytes written) *TBW varies by capacity. SX8200 Specifications - Capacity: 240GB/480GB/960GB - Form Factor: M.2 2280 - NAND Flash: 2nd Generation 64-layer 3D NAND - Interface: PCIe Gen3x4 - Sequential R/W: up to 3200/1700 MB per second - 4K Random Speed: up to 310K280K IOPS - MTBF: 2,000,000 hours - Warranty: 5 years *PCIe M.2 2280 is not compatible with SATA M.2 2280, please check your system spec before purchasing.
Customer reviews
Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.
Learn more how customers reviews work on AmazonReviews with images
Submit a report
- Harassment, profanity
- Spam, advertisement, promotions
- Given in exchange for cash, discounts
Sorry, there was an error
Please try again later.-
Top reviews
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
When I try a firmware update, I get a message that it cannot be done in IDE or Raid mode. I am in AHCI mode as I am replacing a Samsung EVO 850 that is in AHCI mode and I confirmed this via BIOS. And I cant' contact support! The website offers no options to update Firmware. There is no download option.
The cloning software is very old version of Acronis which failed. I struggled to make the clone bootable.
I installed in my ASUS Z170-A and it seems to be working, but the benchmarks do not approach rated speed.
I saw stellar reviews on this product and went with it instead of the Samsung EVO 970 which was $27 more expensive.
BTW: Why all these reviews about a different product? The product is M2 NVMe product not Sata.
Update: To be fair and objective I upgraded the rating. The UPC code on the box is covered by an Amazon label. Not sure why they do that and it is hard to remove. Secondly I managed to open a ticket and they responded with a Tech Support phone number. I got a tech on the line who was helpful. That number is 714-332-8735 or 714-332-8736. Their SSD Toolbox gives an error when trying to upgrade firmware. He said they have not updated the toolbox for the new product which should have been done when they released it. I was a little disappointed in the benchmark numbers I got, but everybody's PC is different. I did get it installed with difficulty due to cloning issues from one SSD to another. I could not get it to boot but probably not an issue specific to Adata. Getting their Acronis cloning software was not straight forward. I did get it work eventually using Diskpart and it seems fine. At $80, it was a great price.
This easily installed in my ASUS Prime X470-Pro AM4 motherboard with Ryzen 5 2600 processor. It benchmarks very well in CrystalDiskMark. The heatsink on my motherboard keeps it under 45 degrees C while running benchmarks even. I took off a star because I was unable to download the Acronis software. I was able to find the correct serial number and register on the website, but the download was only going at a few kilobytes per second and would eventually crash. I ended up just re-installing windows and copying over the files I needed instead of cloning the drive from my old SSD. I also was not too impressed with their toolbox software. It couldn't even read the current firmware version, let alone update it. I doubt there is any new firmware yet though, since its still a new product. Adata definitely needs to work on their website and software.
I have had this for about a month now with zero hardware problems since installation. Windows definitely boots more quickly than it did from my older ssd. I also like that there are no cables to deal with and it takes up very little space.
Reviewed in the United States on July 29, 2018
This easily installed in my ASUS Prime X470-Pro AM4 motherboard with Ryzen 5 2600 processor. It benchmarks very well in CrystalDiskMark. The heatsink on my motherboard keeps it under 45 degrees C while running benchmarks even. I took off a star because I was unable to download the Acronis software. I was able to find the correct serial number and register on the website, but the download was only going at a few kilobytes per second and would eventually crash. I ended up just re-installing windows and copying over the files I needed instead of cloning the drive from my old SSD. I also was not too impressed with their toolbox software. It couldn't even read the current firmware version, let alone update it. I doubt there is any new firmware yet though, since its still a new product. Adata definitely needs to work on their website and software.
I have had this for about a month now with zero hardware problems since installation. Windows definitely boots more quickly than it did from my older ssd. I also like that there are no cables to deal with and it takes up very little space.
You will see a dramatic increase over the hard drive in the now infamous Anthem(I still think it's decent). You won't see a huge jump over SSDs in gaming load times but in areas like Game Installations and Workloads NVME setup as PCIE will drastically improve the experience.
Cons: This might be true of all M.2 drives. IF YOU WANT TO MAKE IT A BOOT DRIVE PREPARE TO WORK. The other issue is the software stinks.(you don't need any software to get it to run. Just plug it in and set it up in the Disk Manager). You get bad temperature readings and such. I dunno what they did but it has also led to inaccurate reading in HWINFO as well. The only way to accurately see your temp is to use CrystalDiskInfo(I swear I don't work for them lol). The Software that comes with the M.2(and HWINFO as a result) reads my M.2 temperature as(and I am not making this up) -273c degrees LOL. Asus makes decent boards and I am using the M.2 Heatsink but c'mon lol.
Luckily, the CrystalDiskInfo somehow has an accurate temperature 23c idle and 33c load.
I will probably still buy another at some point because I have 1 more M.2 Slot. Gonna see how this one does 1st. It's fairly close to the top Samsung's but at a price mere mortals can afford to pay.
I wish the box had included a little more documentation about how to install it - not even a web link. But I guess there isn't a lot that can go wrong if you're careful with the device. I used Macrium Reflect to copy the Intel disk to the new Adata disk, and Windows didn't want to find the new disk properly at first, but it allowed booting into safe mode and somehow it fixed itself. It boots normally now.
Some M.2 disks heat up under heavy load and throttle themselves to prevent overheating. My Intel 540 did that, but this Adata drive has a built-in heatsink which may help - I haven't thoroughly wrung it out under heavy load yet. In any case, the built-in heatsink provides easy attachment for a larger, better one.
I've only had this drive for a day, but am very happy so far.
Top reviews from other countries
This ADATA SX8200 NVMe SSD has a great performance a little less but similar to Samsung 970 EVO NVMe SSD but for much less money. It is much faster than a regular SSD especially if you use it as a boot drive ( I wouldn't recommend it otherwise, not as a backup drive anyway) and it also has a 5 year warranty.
But keep in mind that you need a motherboard that can support NVMe ( most recent motherboards do) in other words that it has a M.2 slot that supports not only regular SATA SSD but a M.2 slot that supports NVMe SSD. To also take advantage of the full NVMe SSD speed, you need to install it in the M.2 slot that has the 4 lane PCIe Express (3.0 x4) as per the instructions manual of your specific motherboard. Otherwise it may only run at half the speed if placed in another m.2 slot. Also make sure you can boot from it in the Bios with NVMe.
Even if you do not have a M.2 slot you may be able to use a M.2 NVMe to PCIe 3.0 x4 adapter card to install the NVMe drive on it. But keep in mind that most older mainstream BIOSes do not support booting from NVMe and most likely, never will.
Other important fact is that if you use it on a Windows system, make sure the operating system supports the NVMe drivers for it to be recognized during the installation process. I know for a fact that Windows 10 does support it automatically but Windows 7 doesn't.
But there is always a way...
This section concerns installation on Windows 7 only
I was finally successful installing my Adata SX8200 NVMe SSD on my Windows 7 system but I had a hard time even though I knew it would be a challenge. Since Windows 7 is an older system ( but still supported until 2020 by Microsoft) it did not have the NVMe support since it is a newer technology. If you insist on installing it on Windows 7 for any reason, you will have to inject the NVMe drivers into your Windows 7 Installer USB before you can install Windows 7 on your NVMe SSD (make sure you get the most recent version on the Microsoft website since it has USB 3.0 support as well on it, unless already know you do have it. Also If you can't download it because you do not have your product key handy, there is a legitimate tool called HEIDOC that can do this download for you but keep in mind you will still need a Windows 7 product key to activate your copy of Windows within 30 days. There are 2 legitimate website where you can buy it for cheap on SCDKey.com and on Kinguin.net. They even offer a protection for a few dollars more in case you're worried your product key wouldn't work for any reason).
As for power users out there !!! There are a few good YouTube videos and web sites that shows you step by step on how to integrate the NVMe drivers through the Assessment and Deployment Kit (ADK) using the CMD (command prompt) using the DISM command line into install.wim but even if you follow the steps it may not work since you have to know which index (of the 4 indexes) represents the Windows 7 version you are installing (ex. : Windows 7 Ultimate or Windows 7 Home, etc...) to mount the Windows 7 NVME drivers. Of course there is command line for this also... :
dism /Get-WimInfo /WimFile: c:\sources\install.wim
(where " c:\sources\install.wim " is an example of the location of your install.wim location on you computer)
Since I didn't know at the beginning that there was multiple index on the install.wim that I got from my Windows 7 Installation USB drive I did not verify it so the DISM commands all worked but did not apply on my specific Windows 7 index version unfortunately.
I did not want to get through the whole process again, so I decided to use a much simpler method using a tool from Gigabyte on their website called " Gigabyte USB tool". By the way it seems to work on other motherboard brands because it worked on my Asrock motherboard. To find the tool search for "Gigabyte USB tool" in Google and select the link on Gigabyte.com then go down the list and search for "Windows USB installation Tool" to download it, install it and follow the instructions from the video I mention on the next section. --- Whether you use the DISM command line and include the /recurse option( to include the sub- folders within the location of your drivers) or the following method please consider using a 16 GO USB drive since 8 GO may not be enough space while adding the additional drivers to your Windows 7 installer USB key.
I strongly suggest you to watch a video on YouTube called "Installing Windows 7 on Kaby Lake, Skylake, Coffee Lake and NVME - LIVE" from Carey Holzman who explain it very well. He even explains how to get the updates on Windows 7 for recent computer systems for Kaby Lake and more recent ones on Intel platform and also for Ryzen on AMD plarform... there is a specific patch called Wufuc by Zeffy on github website. That worked for me !
Hope that was helpful !
However, I had terrible experiences with the first drive that I received, which ADATA labelled as V5.0 on the box. This drive came boxed in all black packaging.
Firstly, I bought the drive as new, but it was used. This only became apparent when I ran a Windows 10 installer to discover that the drive had already been partitioned for Windows. Upon booting I ran HWiNFO which determined that over 500 GB had already been read from and written to the drive. Moreover, the drive started taking up to twenty seconds to boot to the BIOS and subsequently started occasionally BSODing with the error code DPC_WATCHDOG_VIOLATION when I woke my device from sleep. This then started happening every time I woke my device.
ADATA list no firmware updates on their website and I had tried both re-installing Windows and extensive troubleshooting, so I sent the drive back. The replacement I received came packaged in a different box. This new box had red edging and carried the model number V6.0 on it. This new drive works flawlessly and has none of the same issues that the V5.0 drive had.
I cannot guarantee that V5.0 drives all have this problem but ADATA/Amazon are sending out different versions of supposedly the same SSD.
In short, the ADATA ASX8200NP 480 GB is an affordable option compared to the considerably more expensive alternatives from Samsung and WD, but double check the version you receive.
Reviewed in the United Kingdom on September 18, 2018
However, I had terrible experiences with the first drive that I received, which ADATA labelled as V5.0 on the box. This drive came boxed in all black packaging.
Firstly, I bought the drive as new, but it was used. This only became apparent when I ran a Windows 10 installer to discover that the drive had already been partitioned for Windows. Upon booting I ran HWiNFO which determined that over 500 GB had already been read from and written to the drive. Moreover, the drive started taking up to twenty seconds to boot to the BIOS and subsequently started occasionally BSODing with the error code DPC_WATCHDOG_VIOLATION when I woke my device from sleep. This then started happening every time I woke my device.
ADATA list no firmware updates on their website and I had tried both re-installing Windows and extensive troubleshooting, so I sent the drive back. The replacement I received came packaged in a different box. This new box had red edging and carried the model number V6.0 on it. This new drive works flawlessly and has none of the same issues that the V5.0 drive had.
I cannot guarantee that V5.0 drives all have this problem but ADATA/Amazon are sending out different versions of supposedly the same SSD.
In short, the ADATA ASX8200NP 480 GB is an affordable option compared to the considerably more expensive alternatives from Samsung and WD, but double check the version you receive.
I also needed an Adapter and after reading the reviews, went with a full size Sintech NGFF M.2 PCIe SSD Adapter, rather than opt for the mini size adapters.
The Sintech Adapter was being shipped from China. I expected it between the middle of November and early December. I was pleasantly surprised to receive it today, after only 9 days.
After installing the blank Adata SSD, I then booted up my laptop from an external backup drive. The Adata SSD was recognized straight away and I was able to format it.
Then, I opened SuperDuper and cloned from the backup drive to the Adata SSD.
After completion, I restarted my laptop. Immediately I noticed really high temperatures between
75c to 85c, which obviously, I did not expect. I left it for an hour and still the same results.
After reading a few more reviews, I removed the heat sink (with the XPG logo) that I initially installed and also, the white specs label. Straight away, the temperatures dropped to 35c to 45c and remained steady, which is where I am at now.
So far, this has been a great buy. The performance of the Adata SSD is certainly faster than Apples Samsung 250GB stock SSD and I feel some comfort knowing that it has a 5 year warranty
Not that in the melee I didn't sign up for another year of Acronis - not that it helped . . . I had an hour and a half on an afternoon free to do the job - it took three in total. For some reason one of the programs I tried found disk errors - I am quite certain there are none - but after doing the entire copy - stated certain errors were bad.
BUT - it was my fault for being over-optimistic - I have used software from Samsung etc - to clone drives and BAM! its done. These guys need to get their software package in order. Customer support? Really?
And I tried my library of tricks - I cannot remember what software eventually actually cloned my drive - wish I could - but I tried three at least and maybe 4.








































