Buy Used and Save: Buy a Used "Xyron Sticker Maker XRN150 "X" 1.5 inch" and save 27% off the $10.99 list price. Buy with confidence as the condition of this item and its timely delivery are guaranteed under the "Amazon A-to-z Guarantee". See all Used offers.
Other Sellers on Amazon
+ Free Shipping
+ $4.29 shipping
+ $4.64 shipping
Xyron Sticker Maker XRN150 "X" 1.5 inch
|You Save:||$2.99 (27%)|
- Enter your model number to make sure this fits.
- Replaces messy glues and other adhesives
- A must have portable adhesive solution for crafters, moms, teachers and more
- Applies an edge to edge acid free adhesive to items up to 1.5-inches wide and about the thickness of a nickel
- Refill cartridges available; Easy to change
- Perfect for die cuts, buttons, flat gemstones and so much more; measures 4 x 4 x 2
Frequently bought together
Customers who bought this item also bought
Special offers and product promotions
CHOKING HAZARD -- Small parts. Not for children under 3 yrs.
From the manufacturer
Easily Create Your Own Stickers
The XRN150 by Xyron allows you to quickly and easily add a layer of edge to edge adhesive to any flat item up to 1.5 inches wide. The unit comes loaded with 20 feet of non-toxic, acid-free, permanent adhesive. It is ready to use right out of the box! This machine is perfect for card making, homework projects, scrapbooking, mixed media projects, personalized labels and so much more. It works great with intricate embellishments and can even be used to add glitter to die cut shapes. See the video above for a quick demonstration of how to use the X by Xyron. Items will emerge from the unit with a protective film that is designed to remove excess adhesive and is to be removed before placing your item on your project.
Easy to Refill - Permanent or Repositionable Adhesive
The XRN150 is refillable and refills are available in permanent or repositionable adhesive. The video above shows how quickly you can switch cartridges in the XRN150. Permanent adhesive will provide a firm hold on most surfaces. Repositionable adhesive is great for times when you may need to place, reposition, and replace an item, perhaps to create a perfect card or scrapbook page. Refills fit all styles and versions of the XRN150. Since the refill is a continuous 20-foot roll, you can create stickers of virtually any length.
Make stickers up to 1.5-inches wide and as long as you like. Perfect for scrapbooking, card making and other paper craft projects. Also great for office and school items. Create your own self-adhesive punch art mini die-cuts, photo stickers, borders. labels and more. Easy to use machine puts a uniform adhesive coating only where you want it - on the item to be glued. Even works on intricate shapes like stars and is great for ribbon and yarn. Add a personal touch to cards, packages and home decor products. Refill cartridges are available in both permanent or repositionable adhesive. Unit comes loaded with 20-feet of permanent adhesive. Repositionable adhesive is perfect designing your layouts, allowing you to move items even after you've placed them.
Top Customer Reviews
And then there was the waiting period, which was pretty speedy, all things considered. It got here before Christmas, and that's what truly matters in the end. There is nothing more deserving of a disappointed shake of the head than a package that arrives on the 26th.
And we can talk about how cute this thing is, right? It's like a little square plastic cat that just sits in your lap whilst you happily turn the knob and make little sticky crafty things. Incredibly simple, so there's no need to worry about technical problems. I mean it. I'd be impressed if you somehow managed to screw up turning a knob. Doesn't poop or get sick or anything, either. So it agreeably beats any sentient domesticated creature in that regard.
The only issue I have with my feline substitute is that there's no warning when your cartridge is about to run out. So you might have a piece of work you put a elephantine amount of love and care into, only to have it gobbled and spat out half un-sticky. So check the inner workings of your quasi-cat regularly, and try to conserve cartridge by conglomerating your works. Don't do them individually.
In addition to my Christmas cards I used it to make gift tags. I cut out a white tag with a gift shaped window, and a solid colored tag. I ran the colored tag through the Xyron, attached the white tag to it and then put glitter on the exposed adhesive in the window. Everyone loved them and they really dressed up my plain craft paper wrappings.
You can put multiples through at the same time if you have something narrow. I used narrow ribbon and put three pieces through side by side (see picture). Great buy at a great price - so much cheaper than buying craft embellishments! Get a little bit of ribbon on sale and just pop it into the Xyron!
I got this about a week ago, and I've been trying various combinations of dies, papers, etc. Bottom line: it's a keeper. It works great for most things, and the size is sufficient for *most* of my "fussy" dies.
It did take a bit of trial and error to figure out how to make it work with my most delicate dies. For example, I like use the Memory Box word dies (like this one: Love Script Die Cut // Memory Box ), which make very delicate "cursive" words. I tried cutting the word out of card stock FIRST, then running it through the Xyron. Uh .. no. This doesn't work well at all. It won't feed through the Xyron without getting tangled up, and it took several minutes to extricate all the stuck-to-itself bits. What a mess!
Then, I tried cutting a rectangle of card stock about 2.25" wide by the length of the word + .5", running that through the Xyron, then cutting the word from that combination using the die and my Sizzix. Worked great! You do need to be careful when removing the backing from the die cut, but it definitely worked better than anything else I've tried.
I also tried it with a delicate snowflake die cut, and again, it worked better when I adhered the paper to the Xyron tape, and then die cut the snowflake. I could get a die cut paper snowflake to feed through the Xyron without doubling and tangling, BUT I ended up with a lot of extra adhesive between the snowflake "points." Die cutting after running a square of paper through the Xyron resulted in perfectly clean snowflake "stickers."
Naturally, it works just fine for less fussy die cuts: more solid shapes, tags, etc. Those you can die-cut first, then feed them through the machine. If you have several to do, try to feed them one after the other through the Xyron -- you'll end up saving more of the adhesive runner that way (less waste). However, I'll probably continue to use other glue methods with these, and save my Xyron for the fussy bits that normally require glue pen. The cartridges for the Xyron aren't cheap!
It also works great for ribbon -- I like to trim a card stock mat with ribbon before sticking it down on the card front, and usually just tack the ends of the ribbon on the back of the mat. This allows the ribbon to be securely adhered to the card edge-to-edge.
It's wonderful with vellum, too, as it covers the entire back of the vellum piece with adhesive.
It handles things up to 2.5" wide, so if you need to glue something wider, you'll need to go up to the XRN500 or XRN510 (5" wide).
I'm totally sold on this. It's definitely going to be a big help with my card making.