Customer Reviews: Yamaha RX-V375 5.1 Channel 3D A/V Home Theater Receiver - (Discontinued by Manufacturer)
Amazon Vehicles Oct16 Amazon Fashion nav_sap_plcc_ascpsc Electronics Holiday Gift Guide Starting at $39.99 Subscribe & Save Cozy Knits Book 2 or More Hours of House Cleaning on Amazon pbskids pbskids pbskids  All-New Echo Dot Starting at $89.99 All-New Kindle Oasis AutoRip in CDs & Vinyl Shop Cycling on Amazon

Your rating(Clear)Rate this item

There was a problem filtering reviews right now. Please try again later.

on June 21, 2013
I got this receiver as a wedding present for one of my friends and from setup to audio quality to value, I was impressed. I am a little geeky when it comes to home audio and I helped him set it up. They wanted a receiver that they could listen to music in two rooms and watch movies/tv/play video games in their main room. I wanted to keep it under $300. The Yamaha met all these requirements and it delivers a great sound.

I've had a Denon 3808 for about 10 years and I have to say this Yamaha had many of the features and sound quality of the system I have and I paid a lot less for the Yamaha.

- Impressive audio. I know speakers also play a role but this receiver made Polk Audio RM6750 (about $180) speakers sound amazing. I've heard good things about this Polk line but the clean and crisp sound I am giving credit to the Yamaha receiver. It provides well balanced sound with good highs, mids and lows.

- A variety of audio and video inputs. A lot of receivers in this price range have removed most all of their video and audio inputs in favor of HDMI only (Harmen Kardon 1700, I'm looking at you here). I liked that the Yamaha 375 gave people options of component and composite video inputs as well as a full complement of audio inputs. I especially liked that you can mix and match audio and video inputs depending on your set up. For example, you can tell it to do HDMI video with analog audio 1 for sound.

- Calibration was a breeze and made for impressive audio with the included mic. I wasn't super impressed with the initial sound when we hooked everything up but once we calibrated it using the mic, I went from underwhelmed to impressed. The texture on the sound was rich and encompassing and the bass was well integrated without muddiness or being too loud.

- Audio output. Again, this is a feature that has gone by the wayside for many receivers in this range. Loved that this one had it.

- As with most receivers in this price range, the audio output will only route analog sources through them. HDMI and optical inputs will not be sent via the analog out. They only wanted to hear music in their kitchen, so it wasn't a huge deal and this was one of the only receivers in this range that had audio outputs.

- The receiver will not up-convert analog sources to HD. So any of the analog video sources will be sent straight through at whatever resolution it outputs. Again, not a big deal because most all of their equipment was HDMI with the exception of the audio plugin for their mp3 player.

Overall, they have been loving the set up and this was a great receiver for them. Because of how much the receiver impressed me, I will definitely consider the Yamaha line (likely one of the 375's big brothers) the next time I am getting a receiver. This one provides great value and great sound at a reasonable price. Highly recommended.
2929 comments| 167 people found this helpful. Was this review helpful to you?YesNoReport abuse
on November 3, 2013
Technology improvements have really made Home Theater Receivers way better and cheaper over the last 15 years.....after listening to this one I would say the last 5 years were really good. I was leary about spending 'only' $250, but there were enough good independent reviews that I decided to go for it. I did not want wifi on my HT reciever - got Laptop and Roku for that. I did not want 7.1 HT as I live in a normal house (this is in a 15x20 room). I did need more HDMI inputs than my 6 year old Onkyo had. And lastly I am somewhat frugal and do not always need the next new thing. I am running Definitive Technology ProCinema 100 HT speakers (yes, they are indeed over 15 years old and still awesome). The one bummer about this yamaha receiver is they only have banana plug inputs for the front main speakers. The others are cheap push connecters that do not work well if you are running thicker than 18 gauge speaker wire - I was not a happy camper removing banana plugs, cutting, striping wires, and figuring out the best way to get a good connection. Twenty minutes later I had it setup and ran the auto setup for the speakers. The first thing I did was put on a familiar movie (Oppo Blu-ray) to gauge the results. It was immediately evident this was an significant upgrade from my Onkyo TX-SR605 which was highly rated in 2007 (I think it cost around $400....the Onkyo was way better than my 1998 $1000 Denon AVR-3200).

I played with the pre-programmed sound options and the sound coming out is more present, more dynamic, more was very enjoyable. I then put on a CD - this is where I found a huge difference. My PM100 speakers are great for Movies, but just good not great for CD's. That is no more - now CD's sound great. I played with the pre-programmed sound options some more....this is really cool. I then ran some youtube from laptop to HT. There is a noticeable dropoff in sound quality here....played some more with PPS and did get noticeable improvement in sound. The sound from Roku was better than youtube.

I gave 4 not 5 stars because of the speaker connections.....might be the best $250 I ever spent.
33 comments| 60 people found this helpful. Was this review helpful to you?YesNoReport abuse
on May 11, 2013
I just picked this up on Thursday and hooked it up today. All in all it was a breeze. It took me about an hour to hook it up, test it with my various devices, a Samsung HD DVR cable box, my Samsung TV, my Blu Ray player and my Roku. All are performing as expected (mostly, get to that in a sec).

I did a bunch of research on this and a few other receivers, from Pioneer, Onyko and Sony. My needs were a receiver with at least 5.1 surround (my current set up) and HDMI switching and the ability to work with the Netflix 5.1 surround on my Roku. I was concerned about the Netflix/Roku 5.1 surround after doing some research and hearing a bunch of horror stories with various receivers not working right, well, actually I think it's more of a Roku 2 issue. But a number of budget receivers like this one and some higher end ones, all seemed to have a bit of the issue. Some also had a "handshake" issue with some cable boxes. Even though there were some work around with a number of the receivers, I personally refuse to pay a lot of money for something and then spend hours "hacking" something to get it to work like it was advertised to. Now to be fair, most of the issues with a number of receivers where 2012 and earlier models, but I didn't want to spend over $350 for this set up so there were a lot of deals on 2012 models but even with firmware updates there were still issues with some people's systems.

Well as I said, I can report after hooking this up and testing it, all are working, there is a delay with the Roku though once you get into a movie with at least 5.1 surround sound. It takes about 10-15 seconds for the video to show up once you select a movie. And this was with any service, Netflix, Vudu, Amazon and Plex. Now once it came up, all is good, but with the blu ray and my TV once it's on, it's on, no real delay. And while 10-15 seconds is not to bad, it's still a bit of a bummer, especially with shows that start right up. But I can live with it, I am hoping a firmware update might help a bit as well.

Overall the system is really easy to set up and the included mic to help set the surround sound is pretty sweet, just plug in the mic, got to set up and it calibrates it in about 3 minutes, and it sounds great. Music sounds really well as well, with an Ipod or just a USB plug, no issues as all. In fact, if not for the delay with the Roku, this would be a 5 star receiver for the money.

I would recommend this system to anyone who is looking for a solid base system.

Edit - update on Roku streaming

I can confirm that the delay from the Roku while watching HD content was indeed because of the Roku device. I just updated to the Roku 3 and there is no delay at all. So if anyone is concerned about this issue, it is a non one with the Roku 3

Edit 2 - I updated my review to 5 stars because the issue of the delay with the Roku and Netflix was indeed from the Roku 2. Also I have had this unit for a while now and I still love it and combined with my Logitech remote watching tv, movies, roku and listening to music is a breeze... Overall this is a really good entry receiver.
55 comments| 92 people found this helpful. Was this review helpful to you?YesNoReport abuse
on December 4, 2013
After a bunch of research, mostly reading reviews on here, and noticing that recommended this receiver as their #1 pick, I bought this from Best Buy last night. (FYI Best Buy price-matches Amazon, and there's no possibility of getting a DOA unit due to shipping problems) Brought this home with Pioneer SP-BS22LR speakers to use with my new Panasonic TC-L50E60 TV on my main floor which is an open layout. I unboxed everything last night and got it set up, here was the process:

1. Unbox - 10min
2. Cut speaker wires, install banana plugs - 25min (no screwdriver = +10min)
3. Plug in receiver, connect speakers, re-route HDMI from cable box - 20min (only 1 connection, + few min if you have others)
4. Browse DVD manual, navigate menus, set up - 45min

In total it was about a 1.5-2 hour excursion (a 2 beer project). That's only with stereo speakers and 1 HDMI input. And I haven't even hidden any wires or made it look good yet - probably another hour at least. Kind of a pain compared to maybe a sound-bar or something, but once set up this thing sounds amazing.

I must have gone through every Comcast music channel, and all of them sound fantastic, filling my entire main room with pretty good bass on the R&B station, great mids with the rock station and excellent highs on classical. I am in no way an audiophile, but it sounds pretty damn good to me. I used this to replace an old Pioneer receiver and Infinity floor speakers, and comparing the two the sound is more detailed on this set up, but not quite as loud, which is completely expected with bookshelf vs. floorstanding speakers.

The only issue I have so far is with HDMI ARC (Audio Return Channel) with my Panasonic TV. The two played well together until I started using the Comcast remote to adjust the volume. I believe this is due to using HDMI 1 on the TV instead of HDMI 2 which supposedly has the ARC ability, we'll see if this works tonight.

UPDATE, AFTER 2 WEEKS: The receiver and my Panasonic TV do not work together. Any time I use another remote to do anything, the Yamaha decides it doesn't want to play anymore, and I have to not only go back and change those settings, but change the settings on my TV too. It's fine for me, but if I'm not home, my wife is not going to do that. We are taking it back this week.
99 comments| 57 people found this helpful. Was this review helpful to you?YesNoReport abuse
on May 1, 2013
The only thing I disliked about this receiver is the connection for center and surround channels have push in connectors that are too small for the heavy duty speaker wire I bought some years ago. The wire just won't go in without removal of some strands. Everything else on the unit is good, especially the DSP. This allowed me to set up my sub-woofer perfectly
22 comments| 23 people found this helpful. Was this review helpful to you?YesNoReport abuse
on July 14, 2013
I looked high and low for a reasonably priced AV unit, after deciding on this unit I have been totally impressed. The sound quality and ease of set up was a welcome feature, and the YPAO feature is the bomb! Place your speakers, plug in the antenna mic and follow the instructions, in a manner of minutes your sound is set very close to perfect. Everyone that has heard the sound assumes I spent much more than I actually did. I could not be happier!
0Comment| 11 people found this helpful. Was this review helpful to you?YesNoReport abuse
on April 3, 2013
I just acquired this item today and noticed chip model numbers are not disclosed within the literature. Since it's a recent item, not seeing much within Internet searches either.

--- IC Chip Listing ---
A few so far that I can visibly see through the top of the unit.

PCM 1681 (TI 105dB SNR 8-Channel Audio DAC with TDM Mode)

PCM 9211 (TI Integrates a stereo ADC, S/PDIF transceiver with up to 12 multiplexed inputs and 3x PCM inputs to allow other audio receivers to be multiplexed along with the analog and S/PDIF signals to a digital signal processor.)

Cinema DSP (Yamaha's chip model number ?. Provides a more fuller surround sound, when the Enhanced button is depressed on the remote. See "WHAT IS CINEMA DSP" on the Internet.)

(Feel free to post chip model numbers within the comments if you beat me to them.)
--- End of IC Chip listing ---


Why would I want to know these chip model numbers?

Because I have an ASUS Essence Xonar STX with Brown-Burr DAC (PCM 1792A) computer sound card documented to perform Industry-leading 124dB SNR and am wondering the best method of wiring the receiver into my current computer setup without degrading audio quality. I can only do this properly if I either know the exact SNR db levels or I examine the chip specifications.

Which Yamaha Reciever? (RX-V375, RX-V475, RX-V575, ...)

If you're an old timer like me in his mid-40's, we just want the basics, and done well. I researched these series of RX-V* receivers and found, most within my age group and older, would be adequately satisfied with just the basic RX-V375 unit. You will only benefit from the RX-V475 if you have a mess of gadgets with lots of copies of digital music files, something a teeny bopper would do, but I would see no need to explore the more expensive receivers (or > RX-V475 models) unless you have increased wattage or increased port requisites. Even though I consider myself a computer programmer (AKA computer geek) in my free time, I vowed not to go with the RX-V475 as these higher models lacked complete computer control via the web browser and/or Ethernet port! Streaming music via Ethernet is also more resource demanding then just using a USB memory stick. Internet radio also doesn't offer me much. (ie. See Pandora Wikipedia.) Since complete control (changing frequencies or volume) wasn't shown within the web browser interface, I definitely decided the RX-V375 would satisfy my needs. None of the other features of the >= RX-V475 would be useful, and at almost twice the cost. Nor am I investing in new speakers. My current 15+ year old speakers are just fine. ;-)

NOTE: The RX-V375 cannot read FLAC media via USB media. Only >= RX-V475 receivers can. Whether this justifies the $150 increase for the RX-V475, shrugs. Personally, I get a little worried with things sticking out at floor level! Media can likely be navigated more easily via a computer, and be played via an HDMI or SPDIF/Toslink with similar quality.

NOTE: The RX-V375 can only playback 16 bit Microsoft PCM WAV via USB media! Only the RX-V475 and higher models will also playback 24 bit Microsoft(?) PCM WAV files via USB media. I have no idea if any of the other models will play PCM-5.1 WAV via USB media. Most Blu-ray audio albums provide 24 bit tracks.

1) Does what a basic receiver should do! Performs as a high quality DAC (using Brown-Burr chips) for your speakers.
2) Provides Dolby/DTS for Movies, while providing basic two channel stereo or 4+ speaker output for music.
3) Provides plenty of input ports such as HDMI, SPDIF/Toslink, and two channel analog.
4) Basic five speaker plus sub-woofer output. (More than two speakers is only required for Movies. Even then, you watch the Movie once, and don't care much about the quality of sound as you would for music!)
5) Pretty much, pull the receiver out of the box and the menu system is ready to do the work for you.
6) Sounds great! Better range than me old 15+ year old synthetic Dolby (DSP) Carver system. A lot less costly too!
7) Hearing Sony had a new receiver with good reviews, but people were stating Sony had a weak sound, turned me to Yamaha. I knew from experience, Yamaha equipment display a more full range of frequencies.
8) The speaker auto adjustment feature is extremely useful due to my more manly placement of speakers. (ie. YPAD Mic) In other words, I place the speakers any place I'm able to find room! On the floor, back-side down, table tops and sideways on tops of TV's. This feature makes calibrating much easier for my unique setups. Required not just for Dolby/DTS, but also for mono and two channel stereo output.
9) Has a basic Treble and Bass settings. (I rarely, if ever use these. I find if I do, the equalizers tend to make a mess of the music quality. Only useful for adjusting less bass, but not needed here as I do not have a sub-woofer.)
10) Has some hall effects. (I use these once in a great while, nice to have. Think Yamaha provides some excellent effects, while other manufacturers' sound generic.)
11) Has power saving features. (Now I can leave the thing on, and it'll turn itself off.)
12) Seemingly only uses 24-28 watts electricity. Far less then a computer.
13) Favorite DSP mode for 5.1 or 7.1 speaker system when playing music, or Stereo TV, or 2.0 Dolby Music encoded TV show, is likely 5-channel Music DSP mode; simply duplicating all front channels to the rear channels. I atypically find the rear channels are very weak and simply duplicating the front channels more well simulates the original environment. This problem of sound reproduction become more vivid when having a larger sitting area, as Dolby/DTS is focused on one sitting position for optimal listening. It's already been said, music lovers simply find stereo still the best method of reproducing the original product, and duplicating the front to rear channels is best. This means, over the air DVB TV might also benefit from using 5-channel Music mode versus selecting Dolby/AC3 DSP mode.

1) Manually setting the presets for FM/AM stations, was a little confusing because I found the memory function appeared to save the station into two memory locations, instead of just one memory location. (Workaround, just use the auto preset for FM!)
2) No auto search for AM radio stations. (Don't even try as the receiver will auto scan/preset your FM radio stations instead, again, causing you to have to clear them.)
3) Once you start a task, there appears to be no cancel button on the remote for when you make a mistake. (ie Try auto scan/preset AM radio stations and then realize it's doing FM stations again. ;-)
4) Advanced Settings menu can only be activated and navigated by the front panel.
5) Radio Data System (RDS) seems to lack implementation. Lacks the Song Title and Author info; and only provides Frequency, DSP Program and Audio Decoder information. I believe this may be a bug within the firmware. (To the best of my knowledge, I already know Traffic information isn't available in my area - but the tuner should also state Traffic Unavailable instead of being completely omitted within the menu settings.) I just read within the manual, for "U.K. and European Models Only." Shrugs, guess no RDS for US models. Not a feature that's going to stop me from buying a quality product. (Likely laws mandate RDS in other countries, unlike the US.?)
6) I think there should be an Ethernet port, capable of controlling the receiver's complete line of settings. I usually have my receivers near floor level, and am always at my computer typing. Would be much easier using a web browser instead of hunting for a remote. Unfortunately, as previously mentioned, the >= RX-V475 models appear to lack a more complete implementation of controlling all the features of the receiver, including tuning to AM/FM presets. I have already EMailed their support department asking for a more complete listing of features concerning the remote control by computer web browser. (From what I can see from the current data on the Internet, tuning AM/FM stations might only be possible with IPOD and other handheld devices?)
7) USB Memory Devices; FLAC, Vorbis, or anything other than 16 bit Microsoft PCM WAV and MP3 files cannot be played with the RX-V375. FLAC and 24 bit PCM WAV requires RX-V475 or higher model numbered receivers! I was able to connect an iRiver portable music device containing an internal notebook hard drive, and the RX-V375 navigated and played MP3/WAV files, along with other external hard drives. (Any other 16 bit Microsoft PCM WAV file, such as aiff, aifc, sun, raw or 24 bit PCM files cannot be played on the RX-V375, even if renamed to a .wav extention!) The lacking of FLAC isn't such a bad thing, as I prefer PCM WAV files due to quality. However later Blu-ray audio media usually contain greater than 24 bit recordings (or high definition audio) and will likely require HDMI cables using an external (software or hardware) media player. I do notice somewhat of a significant improved audio quality when playing USB media versus HDMI/Toslink! This might be one reason to definitely choose the RX-V475 which includes USB 24 bit PCM WAV playback ability versus the RX-V375 only being able to playback 16 bit Microsoft PCM WAV files!
8*) There's a small annoyance within the current firmwware when switching AM/FM bands, the previously listened to station is either incremented by one (preset) or forgotten, causing to again, navigate to the previously listened to station. Also, listeners should have to again navigate through the AM band of stations, after switching to the FM band, or vice versa. (Also note, the previously noted frequency incrementation occurs when setting the memory presets somehow. It's one of those weird bugs.)
9) An HDMI connection requires a video feed and if the video DPMS sets the diplay to off, the audio will also be canceled! Hence, use SPDIF/TOSLINK for music. When connecting a computer to a receiver with HDMI, the screen will have an invisible screen off to the right of the screen, causing the cursor to fall off the screen when using a browser. HDMI was engineered for copy right restrictions only, and not for ease of use! I will continue to use S/PDIF Toslink instead. HDMI is plainly dumb and annoying.
10*) I think I've noticed another bug with the receiver, on AC3/Dolby (Movie) streams, the center channel is omitted from the center speaker channel and the way to enable the speaker channel is to quickly press each of the Movie, Music, Sur. Decode, Straight buttons on the remote, without scanning the sub-menu items. (To avoid scanning sub-menu items, press the previously mentioned buttons for which are not the current decoder.) Once this is done, I now have audio on the center speaker after using this hack. (Because using these menue and sub-menu options are initially confusing, people may easily confuse this bug with the Sur. Decode encoding.) The bottom line, when a stream is sent to the receiver, the receiver should select which decoder to use automatically, instead of giving priority to the previously user selected decoder. (ie. A previously selected 2-channel or 5-channel stereo, instead of playing a AC3/Dolby 5.1 channel audio.) These priorities are quite common within many programming operating systems and languages, giving priorities to certain user provided variables before resorting to other environmental variables. Again similar to the software media player, mplayer, the receiver should automatically select the decoder, but then allow the person to select their preferred decoder -- similar to what the RX-V375 display showing the (AC3/Dolby) decoder being used already does on this receiver, but the decoder used doesn't appear to occur at the stream level when sending a AC3/Dolby stream.

*Items marked with an asterisk above appear to be firmware/software bugs with this receiver!

NOTE: Make sure you have the unit set to the correct speaker impedance ohm settings for your speakers, using the advanced menu. The default is 8 ohms, but I think for my speaker setup, the 6 ohms setting (also for 4 ohm speakers) was more appropriate.

The likely preferred method of integrating a computer with a ASUS Xonar Essence ST/STX sound card to the receiver, is to route the two channel stereo analog output (124dB SNR of the Xonar ST/STX card) into a pair of the available two channel analog inputs. (ie. AUDIO 2). Consider using this for simple stereo encoded music and stereo media when using a sound card outputting a very high 124dB SNR. For movies containing Dolby/DTS or other media containing Dolby/DTS/AC3, route into the receiver using HDMI as HDMI handles all channels uncompressed. I'll also likely route audio from the ASUS Xonar using SPDIF/Toslink for games containing the Dolby/DTS compressed sound. From what I read, this was the likely preferred setup for receivers prior to the RX-V*5 series, and these RX-V*5 series may just be pushing ~125dB SNR, making the sound cards DAC sort of useless. Still, there's likely a very good benefit of using the dedicated sound card's SPDIF/Toslink implementation versus the motherboard's integrated/onboard solution. Also, I recently read the integrated/onboard sound cards sometimes or always lack compressed Dolby/DTS output, unlike the dedicated cards. (We shall soon find out. ;-) One additional tip, use either ASIO or Jack/Alsa, and transmit the audio without resampling. Most software media players automatically resample, while JACK/Alsa and ASIO avoid this, unless you prefer the feature of mixing more than one sound at a time versus quality.


I have found a compressed Dolby Digital 16 bit?/48 kHz at 448 kbit/s DVD audio will loose it's center (voice) channel when using SPDIF TosLink connection, even though I don't think this should happen as S/PDIF should be able to handle the compressed stream identically to HDMI according to specifications? (Be advised when comparing HDMI with S/PDIF connections using this Yamaha RX-V* series of receivers, each connection remembers it's Movie, Music, Surround Decode, Straight and Enhancer settings!)

(See Con list number nine above.)

From the Dolby Digital Wikipedia, "5.1-channel 16-bit/48 kHz Dolby Digital format at 640 kbit/s and transports it via a single S/PDIF cable"

Nor do I see any difference in mplayer stdout. Shrugs. However, I see this Movie used "Dolby Digital Surround EX" encoding, which means some information might be loss over S/PDIF connections. S/PDIF seems to only support plain "Dolby Digital Live" or "Dolby Digital Plus".

Currently, I'm using TOSLINK for everyday uncompressed PCM (ie. music or computer audio) and games, while reserving HDMI for Movies. Another option is to save all your music files to PCM WAV files on a USB memory device. An HDMI connection requires a video feed and if the video DPMS sets the diplay to off, the audio will also be canceled! Hence, use SPDIF/TOSLINK for music.

I'm also recently finding playing media straight from USB storage media sounds significantly better than using HDMI, S/PDIF Coaxial or S/PDIF Toslink! I think I should have gone with the RX-V475. :-/

2013.06.10 Added note concerning only able to play 16 bit Microsoft PCM WAV files via USB. Only >= RX-V475 can play 24 bit PCM WAVS! Negated one star rating because Yamaha didn't adequately notify consumers using simpler comparison methods. Most Blu-ray audio now contain 24 bit audio, and the best method of playing audio is via USB versus HDMI/Toslink.

2013.09.07 - I think I've noticed another bug with the receiver, on AC3/Dolby streams, the center channel is omitted from the center speaker channel and the way to enable the speaker channel is to quickly press each of the Movie, Music, Sur. Decode, Straight buttons on the remote, without scanning the sub-menu items. (To avoid scanning sub-menu items, press the previously mentioned buttons for which are not the current decoder.) Once this is done, I now have audio on the center speaker after using this hack. (Because using these menue and sub-menu options are initially confusing, people may easily confuse this bug with the Sur. Decode encoding.) Added this bug, along with denoting all firmware/software bugs with an asterisks for users to see. Added notes about the engineering of HDMI being engineered for only enforcing copyright, and plainly being just dumb.

2013.11.24 - Add favorite DSP mode for Stereo TV or TV 2.0 Dolby Music encoded show listening, is likely 5-channel Music DSP mode, duplicating all front channels to the rear channels. I atypically find the rear channels are very weak and simply duplicating the front channels more well simulates the original environment. (It's already been said, music lovers simply find stereo still the best method of reproducing the original product, and duplicating the front to rear channels is best.)
1919 comments| 121 people found this helpful. Was this review helpful to you?YesNoReport abuse
on February 17, 2014
Nice #1: Yes, it is indeed a nice Home Theater amp/receiver/switching center. The audio is clean. The surround sound is flexible and tweakable. At $200 it is a good value. The included setup microphone makes detecting speaker phase and balance very easy. But don't take the automatic setup to be the final word. Menu options let you fine tune things from there for even better personalized acoustical settings.

Nice #2: The "YPAO" setup has you place the included microphone at listening position, then runs white noise into each speaker one by one, then runs a frequency sweep into each speaker. From that, the V375 computes distances to each speaker and adjusts micro tweaks to phase, speaker size, audio reflection components and EQ on an individual basis. This creates a file for your listening room. It beats the poo out of trying to setup all these factors accurately by simply listening.

Caveat #1: UN-fortunately, the 5.1 specification is not describing amplification. You get five channels of amp, but no amp to drive the sub-woofer. To use this with a sub, you'll need a self-powered sub-woofer. A good one will cost as much as the V375 itself. Or, the pre-amped sub-woof output will need its own mono amp to drive a non-powered sub-woofer. Yes, you could have discovered that by scrutinizing the specs, but they certainly don't make a point of letting you know that before you buy.

Nice #3: Fortunately, the auto setup detects the lack of sub-woof and attempts to compensate through the other speakers. In my setup, I have some nice RAMSA front speakers L/R, and they take up much of the slack. I'm still looking for a simple amp for my existing non-self-powered sub.

After auto setup, it will probably suit you to play with the individual speaker distance and volume controls (especially the rear channels) so your head is better served for those effects. My personal preference is to have the rear channels in a supportive role, not a dominating role. I was amazed that the YPAO system worked as well as it did, then was re-amazed to see how much better personal intervention made the system sound. In a small TV room, tweaking the rear surround channels can make a big difference in the audio environment.

Nice #4: My previous amp had 5.1 full channels of amplification, but the V375 is far better. The sound is clean, well-tempered and able to be globally EQ'd and adjusted for lip sync. Many shows on TV are a tad out of sync, so with a U-verse feed, I find that about a one frame delay for movies works quite well. One frame of 24 fps =41 milliseconds, and you adjust it by units of one millisecond. Just gauging it by ear, I arrived at 38 ms. We'll see how that holds up from channel to channel...

Nice #5: The "Scene" feature is very handy. You can pick an HDMI or component video input, an audio input or non-standard group of both, plus a surround mode, then hold down one of the 4 Scene buttons to lock that in as a choice. You will probably wish to play with this for a week or two to get an idea of what works best for various kinds of source matter.

Caveat #2: The V375 doesn't have wi-fi, but you can input iPod-like sources through the USB port on the front of the unit. Yamaha claims technologies that recover fidelity nuances from compressed musical sources. On listening, you would be hard-pressed to notice the difference unless you had a true A/B listening situation, but iPod audio sounds quite high fidelity. Buy a long USB cable if you like to be hands-on with your sound source as you listen. Much of that may actually be due to the YPAO room-tuning.

One star short for not having a sub amp.
11 comment| 4 people found this helpful. Was this review helpful to you?YesNoReport abuse
on November 17, 2014
Wanted to share this helpful info on the RX-375, and that the HTR-3066 IS SAME unit..

Here's what the Yamaha website says on its support FAQ: The RX-V377/HTR-3067 is the latest model in that series and has the following differences over the RX-V375/HTR-3066: 1. DC(USB) out for optional accessory. Like YBA-11 Bluetooth adapter 2. Background Video feature (for Radio/USB/AUDIO/AUX input) RX-V375 had radio only. 3. Audio Delay for adjusting Lip-Sync (0-500ms). RX-V375 has 0-250ms. 4. Extra Bass option even with small speakers or no Subwoofer.(Bass Button on Remote for easy access.) 5. Virtual CINEMA FRONT provides virtual surround sound with 5 speakers in front. 6. Removed the Composite Video Input from RX-V377 Front Panel. 7. RX-V377 has only one Audio Analog input, Audio. (RX-V375 has 2, Audio 1 & Audio 2.) 8. RX-V377 has only one Optical input, AV1. (RX-V375 has 2, AV1 & AV4.) 9. Option to change the volume scale from -80 to +16.5dB to 0.5 to 97. (RX-V377 to RX-V577 Models only.) Power and Dimensions are identical. Rated Output Power (8 ohms, 1 kHz, 0.9 % THD, 2 ch driven) 85 W + 85 W Dimensions (W x H x D) 17-1/8" x 6" x 12-3/8"

Update... Had amazon send me a replacement . thanks.. Now replacement , cuts out tv sound at times. Im using optical from tv to receiver.. Ive seen others complain of same issue.
Makes me wonder if yamaha even checks and refurbish thier units. Im thinking they just repackage and pawn them off on Amazon.... And yamaha dosnt consider amazon a authorized seller.. And it seems lots of issues of them with other connections, or just plain dying after few months..-- Shame on yamaha...Seems quality has gone out the window with entry level receivers..[ All Brands ] And months down the road we end up with nothing but a paper weight...
11 comment| 3 people found this helpful. Was this review helpful to you?YesNoReport abuse
on February 25, 2014
I previously had a 8-10 year old JVC receiver that drove all my home theater. I only have a 5.1 setup with a powered subwoofer. I had problems with my center channel fading out so I went with the Yamaha to replace my old JVC.

The setup was easy, especially with the included microphone and setup utility. After I ran that and accepted the recommended settings, I popped in Black Hawk Down on Blu Ray and cranked it up. It was like watching it for the first time all over again. The sounds were so much clearer and separated. I am super impressed.

I also have my Verizon FIOS and XBox 360 running through it all straight up HDMI connections. Easily detected the differences in clarity and channel separation after going to the Yamaha. I am super satisfied with my purchase.
0Comment| 3 people found this helpful. Was this review helpful to you?YesNoReport abuse

Questions? Get fast answers from reviewers

Please make sure that you've entered a valid question. You can edit your question or post anyway.
Please enter a question.
See all 450 answered questions

Need customer service? Click here