Z-Wave Plug-In Multi-sensor, EZMultiPli v2.0 (TWO-PACK)
- Enter your model number to make sure this fits.
- TWO PACK - Motion, Temperature, and Light Sensor with Programmable Color Indicator, Night Light
- Wall Powered, No Batteries, Z-Wave Range Extender/Repeater improving reliability of the entire Z-Wave network
- Z-Wave 5th generation technology, Over-the-Air Firmware updateable
- SmartStart Enabled witth AES-128 encryption, Screw tab to prevent accidental removal from outlet
- Designed and assembled in USA, Z-Wave Certification ID: ZC10-14090018
Customers who viewed this item also viewed
Customers also shopped for
Customers who bought this item also bought
Have a question?
Find answers in product info, Q&As, reviews
Please make sure that you are posting in the form of a question.
Compare with similar items
Aeotec Range Extender 6, Z-Wave Plus repeater
Aeotec Multisensor 6, Z-Wave Plus 6-in1 motion, temperature, humidity, light, UV, vibration sensor
Monoprice Z-Wave Plus PIR Multi Sensor, Temperature - Humidity - Light
Z-wave Plus Motion Detector, Easy to install with PET Immunity, White (PIRZWAVE2.5-ECO)
ZOOZ Z-Wave Plus Motion Sensor ZSE02
|Shipping||—||FREE Shipping||FREE Shipping||FREE Shipping||FREE Shipping||FREE Shipping|
|Sold By||Available from these sellers||Creative Surroundings||Home Controls, Inc.||Monoprice||Amazon.com||The Smartest House|
|Item Dimensions||3.76 x 1.5 x 3.25 in||2.3 x 1.8 x 1.8 in||2.5 x 1.8 x 1.8 in||4 x 3.25 x 2.2 in||2.3 x 3.5 x 1.8 in||2 x 3 x 3 in|
FOR USE WITH HOMESEER 3, SMARTTHINGS, and VERA UI7: EZMultiPli™ enables fully automated lighting that turns on lights when you enter a room and turns them off shortly after you leave. Sophisticated lighting, audio, video and heating/cooling are enabled with the EZMultiPli™ three-sensors-in-one Z-Wave® device. EZMultiPli is primarily intended as a motion sensor that will detect motion and send a command to up to 4 associated Z-Wave devices as well as the system controller. The other Z-Wave devices can directly control lights in a room or the motion indication can be sent to a computer for complex scene control of lighting, audio, video and heating/cooling. When motion is not detected within a preset amount of time, EZMultiPli will send an “off” command to the Z-Wave nodes to turn the lights off. In addition to the motion sensor, EZMultiPli also senses the amount of light in the room as well as the current temperature. The color LED light within EZMultiPli is a convenient night light or can be used as an indicator light to let you know if the weather forecast is predicting rain, your garage doors are open or any other indicator supported by your home control application. EZMultiPli is wall powered - no wires or batteries. Simply plug EZMultiPli into the wall, join the Z-Wave network and you’re ready to go. The optional screw tabs permanently affix the sensor into either a standard or a decorator wall outlet commonly used with GFCI circuits. No worrying about someone accidentally removing the sensor and forgetting to re-install it. An elder parent can’t easily remove the sensor if they forget why it is there. Z-Wave is a wireless mesh-networking protocol for reliable, intelligent home control of all Z-Wave compatible devices. Z-Wave devices can act as repeaters to create a mesh-network to ensure reliable communication regardless of the manufacturer or type of device. This product can be included and operated in any Z-Wave network with other Z-Wave devices.
Top customer reviews
There was a problem filtering reviews right now. Please try again later.
Not great for home automated lights, but has a great set of features. Automated lighting was one of the main reasons that I purchased these sensors and is the reason for deducting one star.
Works well with security purposes (alarms system).
Great multi-color indicator
Plugs into wall (no need for batteries)
Doesn't provide sufficient reset time to be useful for automated lighting.