|Item Weight||1.1 pounds|
|Product Dimensions||9.1 x 7.6 x 2.6 inches|
|Item model number||ZT1212518|
|Item Package Quantity||1|
|Warranty Description||Lifetime Limited Warranty: Warrants product shall be free of defects in materials and workmanship.|
Ziotek ZT1212518 Power Strip Liberator Plus with Pass Through, 5-Pack
|Price:||$35.99 & FREE Shipping|
- Enter your model number to make sure this fits.
- Pass-through outlet on top doubles the number of available receptacles
- 12-inch length to provide a clean, organized look
- Equipped with a 16AWG wire gauge
- Underwriters Laboratories (UL) listed
- Sold in a convenient pack of five
Frequently Bought Together
Customers Who Bought This Item Also Bought
From the Manufacturer
Top Customer Reviews
Someone mentioned not finding the power-handling capability for these cords. The ad says they're 16-ga. AWG, which gives them about a 13-amp capability, which in turn means slightly more than 1500 watts. As someone else warned, it's possible to overload your power strip by adding a fistful of these and plugging in large loads. Check the total wattage of the items you plan to plug in.
Most wall-warts are fairly low-power, but add up the numbers. Volts X Amps = Watts, by the way, in case the wattage is not listed directly.
The angle of the cord and the size(just a tad too big..I can't even force it..on either power strip) make these near pointless..
Using the pass thru..Ive gained about two(2) outlets using 3(three) of these on a 8(eight) outlet power strip.
Get the other ones..Trust me..you'll be as frustrated as I am..no reason for this design..Just simply bad engineering..great concept..love the idea..it just doesn't work..THEY ARE A LITTLE TOO BIG..And I'm not one to shy away from forcing things a bit..but in this case that even ins't possible.
Not sure what the return policy is on this..I need to check with amazon
BUT - the complaints about them being a VERY tight fit on the socket that sits flush to the wall are correct. However the explanation WHY is very simple.
In order to test how tight that socket is without ruining any of my own cables, I plugged the cable into itself to form an "O". It was not tight at all so I looked closer at the male portion. The two flat prongs are identical - one side is not fatter than the other. With power plugs where one flat-prong is larger than the other, the fit will be very tight. To test this, I used a 2-prong power cable that has the connectors of different widths so I would have room to wiggle it out, whereas a 3-prong would not allow that. Sure enough, the 2-prong with different widths for proper orientation in a socket was a tight fit.
With 3-prongs, one flat-connector being wider than the other is out-of-date, since the grounding prong forces only 1 orientation in the socket. BUT - a lot of 3-prongs are built that way, so be aware.
I can still use 4 out of 5 with a 3-prong cable into the wall-flush socket without much difficulty. On the tightest one, I just plug something with a 2-prong cable into it so I can wiggle it out.
The connectors on the end of the tail have no problems at all.
These are still useful if the outlets are an inch or more apart, but on side by side plugs on power bars they are useless.
They do work pretty good on my extension cable though as the plugs are vertical to each other instead of horizontal. And the cables themselves seem to be pretty heavy duty.
Except for this, I would have rated the product a "5".
However, the socket directly above the plug is sooooo tight it is extremely difficult to get a plug inserted (All 5 cords had same issue). - Lost 2 eggs for this.
The socket at the end of the mini extension cord however was fine requiring only usual force to insert other plugs.
Most Recent Customer Reviews
For those odd power strips with not well place plugs - this is perfect. Heavy duty and hefty - quality. Well made and they work well. Read morePublished 7 days ago by Gerald K. Koziol
Essential. I have purchased aprx 25 of these over the last 20 years. Excellent!!Published 1 month ago by DoubleR
I love these power adapters with pass-through. I'd buy about fifty more if they were less expensive. Read morePublished 3 months ago by D. Clayton
Awesome for preventing wall-warts from taking up 2-3 sockets on your surge protector or UPSPublished 5 months ago by Timothy Lorens