I have several different brands of these, which I use to connect ssd drives to raspberry pi computers. This is the ONLY one that actually works; the others just crash the computer. Even the "official" one does not work, but this one works like a charm. I just wish the cable was a bit shorter.
$17.99 with 33 percent savings
List Price: $26.99 
The List Price is the suggested retail price of a new product as provided by a manufacturer, supplier, or seller. Except for books, Amazon will display a List Price if the product was purchased by customers on Amazon or offered by other retailers at or above the List Price in at least the past 90 days. List prices may not necessarily reflect the product's prevailing market price.
Learn more
Learn more
Consider a similar item
Customers who bought this item also bought
Page 1 of 1 Start overPage 1 of 1
- ZCZQC Plastic Hard Drive Spacer 3.5" to 2.5" - PS2 Fat (SCPH 30000 And 50000), BlackZCZQC$9.15 shippingGet it as soon as Thursday, Feb 6
- Crucial BX500 1TB 3D NAND SATA 2.5-Inch Internal SSD, up to 540MB/s - CT1000BX500SSD1, Solid State DriveAmazon's Choice$8.94 shippingGet it Feb 13 - Mar 7
From the brand
-
-
-
Server Racks
-
Display and Video Adapters
-
Computer Cards and Adapters
-
Cables
-
Data Storage
-
Networking
-
Docking Stations
-
-
From the manufacturer
Connect a 2.5" SATA SSD/HDD to your computer using this USB 3.1 Gen 2 ultra-portable cable
Convenient drive access
With the adapter cable, you can quickly swap hard drives without having to install your drives into an enclosure.
You can copy or retrieve data from a 2.5" SSD/HDD quickly with no additional accessories required.
It gives you easy drive access for data migration, drive cloning and data backup applications, with the fast performance of USB 3.1 Gen 2.
Harness the speed of USB 3.1 Gen 2
USB 3.1 Gen 2 gives you greater bandwidth and speed with rates of up to 10 Gbps - twice the speed of USB 3.0 (USB 3.1 Gen 1) technology.
It lets you leverage the high performance of the latest SSDs and hard drives, while alleviating bottlenecks in your data transfers.
Ultra-portable with no external power required
This cable-style adapter features a compact, lightweight design that tucks easily into a laptop bag or carrying case. Use it wherever you go to access valuable data quickly - with no external power required.
Videos
Page 1 of 1Start OverPage 1 of 1
Similar brands on Amazon
Page 1 of 1Start OverPage 1 of 1
Sponsored
YINNCEENShop the Store on Amazon ›- POSUGEARShop the Store on Amazon ›
- RSHTECHShop the Store on Amazon ›
- ELUTENGShop the Store on Amazon ›
Not a Perfect Fit for Atomos Caddies
This SATA to USB-C adapter is very nice. It doesn't perfectly fit Atomos caddies, but it does fit well enough, and the drive is recognized without a problem on my Mac.You can see in my pictures that the SATA end fits the SATA connectors through the Atomos caddy, but it doesn't plug all the way in due to the width of the SATA connector on the cable's end.But again, it works; so it serves its purpose.Pro Tip: Just be careful after you plug it into your computer, not to jiggle it or move it around too much to avoid disconnecting your drive while active, which could lead to corruption caused by accidental unplugging.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
- Reviewed in the United States on September 14, 2018Size: USB-A (3.1) | 2.5"Verified Purchase
Well it works and yes it is Sata 3.1 but there are a few things that I did not like. First of all it tends to get very warm when it is being used. Second there is no LED to indicate that the drive is being accessed. There is a RED LED on the bottom that appears to indicate power. Lastly while the 20 inch cable may be adequate for use with a laptop it is a royal pain for a desktop with the USB3 connectors in the rear. If they had a 1 meter cable then this would be more suitable ... even better if it were a thin, flexible, braided cable.
Update:
Bus 004 Device 002: ID 174c:55aa ASMedia Technology Inc.
ASM1051E SATA 6Gb/s bridge,
ASM1053E SATA 6Gb/s bridge,
ASM1153 SATA 3Gb/s bridge
I have noticed that the LED blinks when the drive is being accessed.
The computer is an HP 8300 SFF (I7 CPU) and I using MB USB3 ports.
The operating System is Linux Mint 18.3 Sylvia 64-bit with Linux 4.15.0-33 x86_64 kernel.
I used Silicon Power 64 Gbyte S60 SSD for testing.
Internal Sata 3 (6 GB/s) : HP 8300 Motherboard (establish base line for drive)
Read: 418.1 MB/s
Write: 276.9 MB/s
Access: 0.21 msec
Sustained Write for 20 GB file: 270 MB/s
Internal USB 3.0 : HP 8300 Motherboard (MB USB3 Port)
USB 3.1 to SATA3 Adapter: Startech USB312SAT3CB
Read: 436.5 MB/s
Write: 286.5 MB/s
Access: 0.25 msec
Sustained Write for 20 GB file: 283 MB/s
External USB3.1: Qnine X001Q6NWPD USB3.1 (10GB/s) in PCIe x 4 Slot (adapter card)
USB 3.1 to SATA3 Adapter: Startech USB312SAT3CB
Read: 443.2 MB/s
Write: 293.5 MB/s
Access: 0.25 msec
Sustained Write for 20 GB file: 190 MB/s
Images in this review
Top reviews from other countries
- StrongFront.tvReviewed in Canada on December 10, 2024
Works as it should, great build quality!
Size: USB C | 2.5"Verified Purchase -
UltraHighReviewed in Germany on January 15, 2025
Mit Raspberry 4 kompatibel
Size: USB-A (3.1) | 2.5"Verified Purchase -
NobodyReviewed in Germany on December 16, 2024
Sata Anschluss
Size: USB C | 2.5" - 3.5"Verified Purchase -
pierreReviewed in France on December 5, 2024
Fonctionne vite et parfaitement avec mon SSD de 8To
Size: USB C | 2.5"Verified Purchase - KartalReviewed in the Netherlands on March 25, 2024
Doesn't need extra power source
Size: USB-A (3.1) | 2.5"Verified Purchase
