Free returns are available for the shipping address you chose. You can return the item for any reason in new and unused condition: no return shipping charges.
PROTECT YOUR EVERYDAY CARRY ESSENTIALS: Battlefield-grade construction keeps your cell phone, GPS, navigation, or communication tools safe with a gasket seal that keeps out water, dust, and dirt, without affecting radio-frequency communication; Thyrm used input from active-duty military and federal law enforcement to provide professional-grade levels of protection while keeping gear immediately accessible; These cases DO NOT BLOCK SIGNAL and are not rated for prolonged submersion or diving
MODULAR MOUNTING SYSTEM: Each DarkVault Comms case comes with a quick MOLLE / PALS attachment system for secure external and internal mounting options on chest rigs, backpacks, webbing, or other gear; The case can release entirely from the mounting bracket, to provide maximum modularity; You can quickly move your case from one mount to another, or remove the case from the mount to carry it with you, away from other gear; Case and mount exterior dimensions: 7.2 x 5.43 x 1.67 inches
FULLY ADJUSTABLE NAVIGATION PLATFORM: Tighten the side lever of your DarkVault Comms Critical Gear Case, turning the DarkVault Comms case into an on-body navigation board or communication center; Or loosen the side friction lever so the case opens as widely as possible, presenting mounted ID or signaling tools; The case can be adjusted to repeatedly open up to the same angle up to 180 degrees
LOCK AND TAMPER-EVIDENT ATTACHMENT OPTIONS: Align holes on the DarkVault Comms latch and mounting bracket to install locks or other tamper-evident devices; Users can prevent access to case contents and secure the DarkVault Comms case to MOLLE or other webbing or straps; Locks are not provided with the DarkVault Comms case
GEAR MOUNTING OPTIONS: Three custom cut internal and external adhesive-backed loop Velcro panels come with the DarkVault Comms case and can be used for ID and organization; Hook-backed gear, patches and identification can be easily removed, repositioned, and replaced, keeping you prepared for your next survival, duty, work, or adventure situation; DarkVault Comms case internal dimensions: 6.70 x 3.95 x 1.15* inches DarkVault Comms interior (*maximum depth at center)
Shop products from small business brands sold in Amazon’s store. Discover more about the small businesses partnering with Amazon and Amazon’s commitment to empowering them.
Customer Reviews, including Product Star Ratings help customers to learn more about the product and decide whether it is the right product for them.
To calculate the overall star rating and percentage breakdown by star, we don’t use a simple average. Instead, our system considers things like how recent a review is and if the reviewer bought the item on Amazon. It also analyzed reviews to verify trustworthiness.
Customers like the design of the carrier bag case. They mention it's a great idea and likeable. Customers are also happy with its functionality and phone protection. However, some customers have reported that the case opens awkwardly and the latch quality is disappointing. Opinions differ on value for money, size, and waterproofing.
Customers like the phone protection of the carrier bag case. They mention it's a great solution for keeping their phones safe but accessible during wilderness excursions. Some say it protects their more delicate navigation systems.
"Holds my phone while out in the field. Kept the phone safe while raining and let me watch YouTube without having to hold it in my hands......" Read more
"Great solution for keeping my phone safe but accessible during wilderness excursions...." Read more
"Very sturdy. Mounts on to my plate carrier perfectly. Protects my phone from the elements. Love this company." Read more
"...They protect my more delicate navigation systems and I would HIGHLY recommend this to anyone looking for protecting their gear...." Read more
43 customers mention "Value for money"21 positive22 negative
Customers have mixed opinions about the value for money of the carrier bag case. Some mention it's sturdy, while others say it's cheaply made and not field worthy.
"...Cool, yes, functional, yes, but please lower the price by a third next time." Read more
"...No chance. Just another expensive box that probably I will use it for screws. At half price probably would worth (paid 59.99)." Read more
"...Well made and sturdy just bit smaller than expected and a bit pricey." Read more
"This case is a complete piece of junk. It has failed me twice now. No more chances. It’s going in the trash...." Read more
19 customers mention "Size"7 positive12 negative
Customers have mixed opinions about the size of the carrier bag case. Some mention it fits their phones perfectly and even has room for their low-pro battery. Others say it's too small for their phones and too bulky.
"Way smaller than expected.cab hold maybe a small load and pencil or a phone. Well made and sturdy just bit smaller than expected and a bit pricey." Read more
"Product is great and as expected. Phone fits perfect and even has room for my lowpro b.u. battery. Only issue was hook and loop supplied...." Read more
"...It won’t fit. Pictures suggest this is a good option for your Garmin inReach Mini 2, however, the lid will not close if you try to use it for this." Read more
"...The latch is hard and I think in time will break. The size of the box is awful small...." Read more
Customers have mixed opinions about the waterproofing of the carrier bag case. Some mention it keeps their maps dry and everything secure inside, while others say it's not waterproof and water seeps in easily after very brief submersion.
"...the phone in 3 feet of water at the boat launch, Oh and it is not water proof...." Read more
"...It fits my Apple 13 pro max like a glove. Very secure and water tight. Easy install on my kit as well...." Read more
"...Water seeps in easily after very brief submerging.Feels much cheaper than it looks in pictures." Read more
"This does exactly what I need it to. It keeps my maps dry and everything secure inside...." Read more
6 customers mention "Ease of opening"0 positive6 negative
Customers are dissatisfied with the ease of opening the carrier bag case. They mention it opens awkwardly, and it's rough to get the molle tab open. Some say the lid doesn't close properly.
"...is a good option for your Garmin inReach Mini 2, however, the lid will not close if you try to use it for this." Read more
"...When I sat down on my kayak the molle failed again but the case also came open and dropped my phone in the River...." Read more
"...It was a bit rough to get the molle tab open...." Read more
"It's not that it's difficult to open, it just seems like it opens up awkwardly, but otherwise, sturdy, solid." Read more
Customers are dissatisfied with the latch quality of the carrier bag case. They mention it's clumsy to work with, hard, and will break in time. Some customers also say there is something wrong with the clasp or clip to hold it closed.
"...Pretty disappointed. The latch is hard and I think in time will break. The size of the box is awful small...." Read more
"...But then I noticed that the molle latch doesn't match typical molle loops, leaving room for it to slide up and down...." Read more
"...Something is wrong with the clasp, or the clip to hold it closed. It will stay shut if I force it, but kind of a bummer." Read more
"...Really cheap feels cheap the latch is clumsy to work with and did I mention very cheaply made just cheap plastic I cannot believe they have the guts..." Read more
Initial thoughts of this product were great. But then I noticed that the molle latch doesn't match typical molle loops, leaving room for it to slide up and down. Also I love how it came with Velcro so you can mount comms and unfold the box, check it and fold up but they gave the soft Velcro only. I usually put the soft Velcro on my phone case for mounting so the rough Velcro would be more appropriate for the case. But the biggest problem is that within 1hr of adjusting, the hinge friction lever broke off, the retaining pin inside bent and the plastic lever came off.Ultimately, I love the idea behind the product and I'm still keeping mine. Give me some tougher pins and match the mount to common molle and I'll be happy to buy another one.
They must be very proud of this product. I love this maker but the price is always uncomfortable.
Designed for someone who would actually use it but priced for someone who is all hat and no cowboy.
Also, I’m not sure what devices are shown fitting into this, but it is essentially a glorified iPhone X holder. Cool, yes, functional, yes, but please lower the price by a third next time.
Overall it’s great, but if you’re buying this to store your Garmin inReach Mini 2, don’t. It won’t fit. Pictures suggest this is a good option for your Garmin inReach Mini 2, however, the lid will not close if you try to use it for this.
Last time I went to Airsoft event, I had my phone shot in my pocket that resulted in the back screen breaking. We generally use Maps to track your location of these kind of events. I got this case to protect it for this time. Took several close quarter shots at 1.55Js and not even a scratch.
At this price one can find better options. Given the fact is Made in USA I bought it and I was expecting at least Made in China good quality. Pretty disappointed. The latch is hard and I think in time will break. The size of the box is awful small. One can store there the phone and one or 2 power bars, or a tool and something flat. I thought i could put there my HAM handheld that is pretty flat. No chance. Just another expensive box that probably I will use it for screws. At half price probably would worth (paid 59.99).
This product is extremely well made. It fits my Apple 13 pro max like a glove. Very secure and water tight. Easy install on my kit as well. I will be purchasing a second one for my other set up. Hands down would recommend this purchase. 👍👍
This case is a complete piece of junk. It has failed me twice now. No more chances. It’s going in the trash.
The first time it came off my utility belt with my iPhone 12 Max Pro in it and was lost in the woods for hours. This was the molle attachment failure.
The second time it was attached to my camelback. When I sat down on my kayak the molle failed again but the case also came open and dropped my phone in the River. I noticed the case parts in my kayak 100 yards down the River. I paddled back and found the phone in 3 feet of water at the boat launch, Oh and it is not water proof. The molle system and the case latch are very poorly designed and your phone is way safer in your pocket.
This is a fairly well made item, the plastic is solid and it locks securely. The molle attachment system feels solid and it holds the unit in place. My only issue is that the seal is not 100%, when closed it has a slight gap on it, however I have held it completely submerged and there was no leak, but it makes me doubt that it will stay waterproof longterm. I will trust this for now - and will update this if I have an issue in the future.
4.0 out of 5 stars
Solid but not perfect
Reviewed in the United Kingdom on August 27, 2023
This is a fairly well made item, the plastic is solid and it locks securely. The molle attachment system feels solid and it holds the unit in place. My only issue is that the seal is not 100%, when closed it has a slight gap on it, however I have held it completely submerged and there was no leak, but it makes me doubt that it will stay waterproof longterm. I will trust this for now - and will update this if I have an issue in the future.