Perfectly filtered, did not easily clog with a 3CC syringe even after filtering a substantial volume of product. Good stuff!
Frequently bought together
This item: COBETTER 10 pcs/PK Sterile Syringe Filter Double-Layer Hydrophilic PVDF Membrane 0.2μm Lab Filters 33mm Diameter Individually Packed, Blue
$12.99 ($1.30/Item)
Get it as soon as Wednesday, Dec 4
In Stock
+
$14.99
Get it as soon as Thursday, Dec 5
Sold by KS-Tek and ships from Amazon Fulfillment.+
$4.99 ($1.00/Count)
Get it as soon as Wednesday, Dec 4
In Stock
Total price: $00
To see our price, add these items to your cart.
Choose items to buy together.
Similar items that may deliver to you quickly
Page 1 of 1 Start overPage 1 of 1
- COBETTER 10 pcs/pk Sterile Syringe Filter Double-Layer PES Hydrophilic Membrane 0.2μm Lab Filters 25mm Diameter Individually Packed, Yellow$6.99 shippingGet it as soon as Wednesday, Dec 4Only 5 left in stock - order soon.
- ADAMAS-BETA Syringe Filter PTFE Membrane 13mm Diameter 0.22μm Pore Size Pack of 100Amazon's Choicein Syringe Lab Filters$6.99 shippingGet it as soon as Wednesday, Dec 4
- ADAMAS-BETA 100pcs Syringe Filter,Syringe Lab Filters, PES (Polyethersulfone) 25mm Diameter 0.45μm Pore Size,Non Sterile Filtration,Green$6.99 shippingOnly 11 left in stock - order soon.
- COBETTER 100 Pack Syringe Filter Nylon Lab Filters 0.2μm Pore Size 25mm Diameter Hydrophilic Filtration Non-sterile White$6.99 shippingGet it as soon as Monday, Dec 9Only 12 left in stock - order soon.
- SEOH Syringe Filter Sterile Purple Nylon Membrane 13mm Diameter 0.45 um Pore Size Pack of 50$6.99 shippingOnly 1 left in stock - order soon.
- 10 Pack Sterile Syringe Filter PES Hydrophilic Filtration 0.22um Pore Size, 33mm Diameter Membrane Sterile PES Membrane Individually Packed by Finetech Made in Taiwan$6.99 shippingOnly 18 left in stock - order soon.
Professional grade filters. Individually packed and sterilized. Perhaps too good for my needs.
I have a home-made photometer that I use to measure beer color. It’s very important that the beer be free of any suspended particles (like yeast) to make these measurements or else there’s light blocking and scattering effects that can affect the result. To eliminate these errors, it’s important that the beer be clear of any suspended matter and so it should be filtered beforehand if necessary. Filters with a 0.2µm pore size should be more than adequate to perform this filtration. I’ve used 13mm x 0.2µm filters in the past to perform this filtration and, while they were effective, the filters got blocked after passage of only 2 or 3mL of beer. I’m hoping that these 33mm filters from Cobetter will do a better job.Beer was loaded into a 3mL plastic syringe and one of these filters was attached to its Luer-lock outlet. The plunger was depressed, and the beer was fed into a 2-mL cuvette. I had no problems with blockage that I had experienced with the smaller filters. The photos show the difference in clarity between filtered and unfiltered of this particular beer (Berliner Weisse Beer). The photometer measured the color (in SRM units) for the unfiltered beer as 4.71 and for the filtered beer as 2.35, so removing the cloudiness made a big difference to the measurement.These filters are nicely packaged in sealed individual bubble-packs. They are sterile. I suppose all this comes at a price and perhaps the quality of this product is too good for my purposes. I don’t care about contamination or sterility – I just want to measure beer color. Having said that, the price is not crazy and $13 for 10 filters is not prohibitive.These are good quality filters at a reasonable price but perhaps a bit too good for my needs.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on July 20, 2023
Beer was loaded into a 3mL plastic syringe and one of these filters was attached to its Luer-lock outlet. The plunger was depressed, and the beer was fed into a 2-mL cuvette. I had no problems with blockage that I had experienced with the smaller filters. The photos show the difference in clarity between filtered and unfiltered of this particular beer (Berliner Weisse Beer). The photometer measured the color (in SRM units) for the unfiltered beer as 4.71 and for the filtered beer as 2.35, so removing the cloudiness made a big difference to the measurement.
These filters are nicely packaged in sealed individual bubble-packs. They are sterile. I suppose all this comes at a price and perhaps the quality of this product is too good for my purposes. I don’t care about contamination or sterility – I just want to measure beer color. Having said that, the price is not crazy and $13 for 10 filters is not prohibitive.
These are good quality filters at a reasonable price but perhaps a bit too good for my needs.
Professional grade filters. Individually packed and sterilized. Perhaps too good for my needs.
Reviewed in the United States on July 20, 2023
I have a home-made photometer that I use to measure beer color. It’s very important that the beer be free of any suspended particles (like yeast) to make these measurements or else there’s light blocking and scattering effects that can affect the result. To eliminate these errors, it’s important that the beer be clear of any suspended matter and so it should be filtered beforehand if necessary. Filters with a 0.2µm pore size should be more than adequate to perform this filtration. I’ve used 13mm x 0.2µm filters in the past to perform this filtration and, while they were effective, the filters got blocked after passage of only 2 or 3mL of beer. I’m hoping that these 33mm filters from Cobetter will do a better job.Reviewed in the United States on July 20, 2023
Beer was loaded into a 3mL plastic syringe and one of these filters was attached to its Luer-lock outlet. The plunger was depressed, and the beer was fed into a 2-mL cuvette. I had no problems with blockage that I had experienced with the smaller filters. The photos show the difference in clarity between filtered and unfiltered of this particular beer (Berliner Weisse Beer). The photometer measured the color (in SRM units) for the unfiltered beer as 4.71 and for the filtered beer as 2.35, so removing the cloudiness made a big difference to the measurement.
These filters are nicely packaged in sealed individual bubble-packs. They are sterile. I suppose all this comes at a price and perhaps the quality of this product is too good for my purposes. I don’t care about contamination or sterility – I just want to measure beer color. Having said that, the price is not crazy and $13 for 10 filters is not prohibitive.
These are good quality filters at a reasonable price but perhaps a bit too good for my needs.
Images in this review
Feedback
|
If you have a question or problem, visit our 
