**UPDATE**I had a warranty claim pretty quickly. Not sure what happened, but I ended up with 1 dead camera out of 2. To my surprise, they seem to have addressed my major gripes about the S hook and the wire terminals. This looks way better (pic attached)! There is now a nylon loop to hold the camera up while you do the wiring. the wires have reusable Wago-style connectors, which ought work very nicely, especially negating the need for a screwdriver to connect wires now. Very good.______________________________________________________________________________Original Review:Cameras work great. Video is excellent, AI tracking is good, automations are good. I love the 3x zoom camera in addition to the wide angle. No need for a cloud subscription is a huge plus, like everyone else is saying. Overall, I'm happy, even though one of 2 has died within 2 weeks of installing it and now I have to figure out what the RMA is like. For the $, I'm glad I got these, because for even more money, 24/7 recording is a must have. I don't think there is anything on the market that has everything this has with none of the downsides until you get to $1000+ cameras.Gripes:No Matter, this is a huge deal, but I'll consider these an interim solution and one day they'll get replaced with Matter-enabled cameras when they come out.No video in Google Home. Only floodlight control.Floodlight color temp is not adjustable. I want warm white light. The color temp isn't too blue, however, so I can live with it.Does not tilt up high enough.My front yard has a very slight uphill grade. These cameras weren't designed with any up tilt. As a result, the 3x camera can't even reach the horizon. Not an issue with the wide camera. This is an an easy oversight and would have been an easy thing to avoid, just design the tilt limit to go above horizontal 10 degrees or so.My biggest issues are with installation...2 screws that secure the camera to its base, the last thing you do for physical installation, are on the sides. Depending on what you have near the camera, it could be difficult or impossible to get at those screws. In my case it meant an angled screwdriver. It would have just been better if they put the screws in the bottom/front face instead of the sides.The big silly S-hook to hold the camera up while you make the wire connections is dumb. High-end CCTV cameras use a cable lanyard that stays on the camera and tucks away when you button up the camera. This thing has to be kept somewhere handy if you ever need to bring the camera down.The worst thing about install is the wire connector/terminal block...1. the screws that pinch the wires are WAY TOO SMALL. I don't feel good about how secure the wires are in there with such tiny screws2. you can't fit a normal philips screwdriver in the plastic wire terminal housing, got to find a micro screwdriver. I think the screws would fit a #1 philips bit, but it's too deep and the plastic around it is too small diameter to fit a #1. Also since they're so small, the good luck not stripping out the philips head on the screw with the undersized screwdriver you have to use.3. once you have the wires tightened into the terminal block, you're supposed to press it into it's place in the camera base, but it's just a friction fit. You end up fighting it into place, and it pops out of place easily because the copper wires are stiff and trying to pop it out all the time.The whole wire terminal block they used is total garbage and they need to do better. This is the single worst thing about this camera... if they last more than a couple years, that is.