Currently unavailable.
We don't know when or if this item will be back in stock.

Have one to sell? Sell on Amazon

BBQ factory Replacement Fireplace Fan Blower + Heating Element for Heat Surge Electric Fireplace

4.4 out of 5 stars 82 customer reviews
| 40 answered questions

Currently unavailable.
We don't know when or if this item will be back in stock.
    This fits your .
  • Enter your model number to make sure this fits.
  • For Heat Surge brand electric fireplace
  • Original parts from factory direct, UL listed, Durable, Quiet.
  • Blower fan Size: Diameter 48mm x L:190mm ; IR Heater size:L210*35(mm) ; 1350W, 120V
  • Temp Switch: 85 deg. Celsius / 185 deg. Fahrenheit
  • Blower / Squirrel Fan + Far Infrared Heater / Heating Elements + Temp Switch

New Arrivals
Currently unavailable. We don't know when or if this item will be back in stock.

Product Description

This listing is for 1 New in Box Blower Motor Unit and a Thermostat Activation Switch. This type of professional grade tangential blower is commonly used to help distribute heat from fireplaces and stoves. Quiet and Efficient. Use it to push heat away from your fireplace or stove and to where it can be enjoyed! Fan + Heater 1350W (whole fireplace 1,500W) 120V Blower fan Size: OD48*L:190mm IR Heater size:L210*35(mm) Temp Switch: 85C / 185F The unit is 10" wide (from the end of the motor to the tabs on the left), 4" tall, and 3" deep. It is small enough to fit where the fan would go on most fireplace units. Simply wire in or add a power cord and you are all set.

Product Information

Product Dimensions 9.8 x 4.5 x 3 inches
Item Weight 1.8 pounds
Shipping Weight 1.8 pounds
Manufacturer bbq factory®
ASIN B006OMLUM0
Item model number 75 CFM
Customer Reviews
4.4 out of 5 stars 82 customer reviews

4.4 out of 5 stars
Best Sellers Rank #598,466 in Home and Kitchen (See Top 100 in Home and Kitchen)
#109 in Home & Kitchen > Home Décor > Fireplaces & Accessories > Portable Fireplaces

Warranty & Support

Product Warranty: For warranty information about this product, please click here

Feedback

Would you like to give feedback on images?
Would you like to tell us about a lower price?

Customer Questions & Answers

Customer Reviews

Top Customer Reviews

Verified Purchase
Part was a snap to install...............I recommend that you install the new (heater/blower) WHILE leaving the old unit wired and unplugged of course. Just lift the old unit up and screw the new unit in. Carefully remove each of old unit’s wires and attach each of the new unit’s wires ONE AT A TIME from the same post. It also helps to take a pic of the wirers beforehand. The wires have a “quick connects” that may need a little pressure to remove or install. I used a pair of needle nose plyers to help that process. A Phillip’s screwdriver is needed to remove the unit. Also, don’t mix up the screws as 4 are for mounting the unit to the mounting plate and 4 are to mount that plate to the heater.
Heater works like brand new!!!
Also, if your circuit breaker on the heater “trips” on high; that part is also available or use an in line fuse or a fuse block and a 15 AMP (250 volt) fuse from Radio Shack. If you choose the latter; wrap the fuse block and fuse with electrical tape.
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
bought one of these last year to put on one of the two heat surge heaters that I have, worked great, was real quiet, so I ordered another one to fix the other one that I have, worked great ! cheap way to fix a noisey blower on heat surge heater. If you have a noisey blower this is the way to go!!
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
By D. puente on November 9, 2014
Verified Purchase
I have a rolling heat surge fireplace, and have used it for years before needing to replace the fan/heating element. Such a great price for this replacement...and very easy to install. We are now ready again to face a long, cold winter!
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
I bought this for the motor. The unit did not fit my fireplace but after switching the motor frame around 180 degrees so it would turn the other direction this worked fabulous. It runs quiet again and blows as it should.
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
I bought this to repair a friends home electric fire place. Even though it was the same model number this product was smaller and more compact (wattage was the same) and the wiring was slightly different, having the fan and the heater on separate circuits. I rewired them to be in series so that both were controlled by one switch (a thermostat) as was in the original fireplace. Easy as pie. Great bargain.
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
Good quality, I would recommend. Works great. Electrician replaced the old burnt out one with this one, in our "Amish" fireplace heater. He also installed a new limit switch. The heater works great now. Thanks Amazon.
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
Great price on this item just have to install it and I hope that it works like the oem one. If it does it would save me a ton of money not having to buy a whole new insert instead. Good seller and fast shipping. I will update if I have any issues.
Comment Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse
Verified Purchase
this was a good replacement part. got it quick and cheap. I am all happy. got this blower/heater replaced in my electric fireplace and i'm all set for the winter.
Comment 3 people found this helpful. Was this review helpful to you? Yes No Sending feedback...
Thank you for your feedback.
Sorry, we failed to record your vote. Please try again
Report abuse

Most Recent Customer Reviews