Is there a limit do how many wireless devices can be connected to a linkys g router

i currently have a linksys wrt54g router, im using it wireless for a ipod touch, netbook, and apple tv. i recently got a ps3 and everytime i turn it on i seem to lose wifi on all of the other devices except for the ps3 have to do a reboot on the router to be able to connect again. any suggestions on what i can try to avoid losing my connection??

256 from memory
For connection issues, check the version of your firmware and consider updating.
It could also be the environment you are in - get a 802.11n

You could have an IP conflict. Check the addresses that the devices are using and make sure that no two are trying to use the same address.

I would limit that number to ZERO -- and then get a better router !!
That puppy is OBSOLETE, dude !!
Step into the 21st century with a NETGEAR WNDR 3700 -- it has the technology to run your extra doo-dads without all that disconnectin' an' re-bootin' stuff -- you betcha !!

There's a limit to the number of IPs you can have in use on a subnet, that number would be 256 - 2 (boundary) - 1 (Linksys), or 253. Effectively, that's the maximum number of devices you could use without some more trickery.

As for the WRT54G - for 54Mbps connections it works just fine; I'm still using one and can push the full 100Mbps through the ethernet ports without problem. If it works for you, keep it.

just want to say thanks for the responses. i ran a 50ft cable to the playstation and all seems to be working fine again. most of the devices im using are all G anyway so didnt really wanna spring for a new router just yet. thanks again

Do understand the practical limit of how many devices can be connected to your network and issued IP address by your router, depends on your router configuration. Most Cisco/Linksys routers might let you connect upto 253 devices at a time (using 192.168.x.x range). But you do have to set this parameter in your router configuration. This limit is not imposed by Wifi 802.11 standards.
You can also use 10.x.x.x subnet, and configure router with /8 mask and you would be able to have upwards of 16 million (theoretical) wireless connections. Typical WRT54 series router has 16MB RAM and 2 MB Flash memory, which is nowhere enough to support this many users. So yes, hardware constraints would put a cap on how many users any given router can support simultaneously in real life, while manual router configuration would allow you to tweak router settings and will let you "stretch" its operational parameters, within the confines of the hardware limitations.

I have verizon DSL broadband. The tehnician suggested Linksys, Dlink or Netgear. I want to use my I Pad and Amazon Kindle. Any recommendations? Thanks

regardless of the IP configuration, all routers will have a maximum simultaneous connection. The router documentation should state the amount of maximum simultaneous connections allowed. Some routers can only handle 2-5 connections at a time some of the real expensive routers can up to 50,000simultaneous connections.

I have a coby touchscreen table and mifi hot spot .

Would like to be able to watch movies from netflix on my
Coby . Any ideas?

Um? Wireless G IS from the 21st century! "dude"
Jun 2003 to be exact!

The G tech. is fine for the standard user in most cases! What do you get a commision from NETGEAR?

You woul dhave to check with Netflix. Netflix maintains an extensive list of devices it supports.

I suppose spending one's hard-earned money on 8 year-old-technology is good enough for you and/or those folks you refer to as "standard users" -- and that's fine with me !!
Personally, I find it both wasteful and counterproductive to buy obsolete technology, but I don't expect everyone to agree with my findings OR my views. You, of course, are free to do as you wish.

And NO, I do not get a commission from NETGEAR -- I just happen to own a NETGEAR WNR3500L, and a D-Link DIR-655, as well.
I have tested them both extensively, and found that the NETGEAR WNR3500L is VERY easy to set up when compared with the DIR-655. The WNR3500L is slightly faster, too.
Both cost about the same, and the differences in performance over the "G" technology is WELL worth the difference in price.
You may not agree, but I speak with the experience of ownership of 3 different Cable Modems (including DOCSIS 3) and 3 different Routers, (b, g, n2.0) 1 Netgear "G", 1 Netgear "N", and one D-Link "N".
My present NETGEAR WNR3500L is a FREEBIE -- it comes completely FREE of cost, with just one stipulation: I have to keep it hooked up for 3 years -- without modification to or of the WNR3500L itself. My Internet connection is continuously monitored by the FCC-approved program, with measurements for several different categories.
I use the data to "tune" my computer for highest-possible Internet connection speeds -- with some very impressive results.
Experience has shown me clearly that "G" technology is OBSOLETE - but if YOU want to keep buying obsolete equipment, then PLEASE DO SO -- the economy needs all the money you can spare !!!

[Deleted by Amazon on Apr 6, 2011 12:59:46 PM PDT]

I signed up too for the FCC program. I submitted my application end of feb but haven't heard anything. I assume I wasn't accepted and am just ready to just buy a new router.

I don't remember how long I waited for acceptance to the FCC Program -- it SEEMS like I had forgotten about it altogether when the "Big White Box" showed up.
But hey, I'm a geezer that's high most of the time, so keepin' track of time ain't exactly my forte, you know what I'm sayin' !??
I already had a kigass D-Link DIR-655 XtremeN Gigabit Router -- an' it was runnin' good when I applied for the free router, which turned out to be the NETGEAR WNR3500L.
It's a freakin' doozy, I tell ya !!! The easiest setup that I've ever experienced, an' it's a tad faster than the DIR-655, too !!
If you're not in a big hurry (aren't we all??), wait a couple weeks to see if you get that FREEBIE !!!
That WNR3500 is worth waiting for, Jamie -- an' ya just can't beat the price !!!
Good Luck !!

Can anyone give me the info. about the FCC Program??? Would like to get a free router too!!!
QUESTION? Any suggestions for a modem/router combo. for mac/using crap ATT DSL. Need to update airport extreme (ancient) & cheap 2 wire modem ATT provides. Need capability to support comp./Wii & DirecTv broadband adapter.

Start up your browser and search for "TestMyISP" (without including " ")and click on the search result with the same website name.
Clicking on it will bring you to the sign up page.

Yo, LG !!
Here is the link you'll need to get started. Check here first to make sure that you meet the requirements BEFORE you waste any time, effort, and/or anticipation !!
http://www.testmyisp.com/requirements.html.

As for a modem-router combo -- I have had EXCELLENT results by teaming a Motorola SB6120 DOCSIS 3 Cable Modem with the NETGEAR WNR3500L Router.
Using this combo with a D-Link DWA-552 XtremeN Desktop PCI Adapter, my Internet connection speeds are consistantly at or near the top of the charts at whatever Speed Testing Site that I test at (Speedguide.net is the most helpful and informative test site I've ever found -- they have TONS of info on just about any computer-related subject , and you can compare your test results with peeps from all over the world, with a record of your results that you can COME BACK to !!)

One other thing:
The NETGEAR WNR3500L is compatible with your MAC -- and it's also LINUX-friendly, too !!

I have used the combo with Windows XP (SP3) and also Windows 7 Pro (32 bit).

The Motorola SB6120 is the absolute "must-have" -- after almost 2 years of continuous use, I can't say enough about the amazing capabilities of this Cable Modem.

I get almost all of my computer gear from Amazon.com -- they have good stuff at a good price, and I've NEVER had to return anything for ANY reason !!!
Good Luck !!

Thanks for the information to check eligibility. I checked and am not eligible because we have a ADSL modem. Knowing that saved me lots of time and effort.

How many wireless devices can I connect to a Linksys WRT110 router. With one user connected I am unable to add another wireless device. Is this a router limitation or a problem with setup?

Setup I'm sure. Are you sure you are trying to connect to your router? Does your router have a unique name (SSID)? If your router is called "Linksys" and your neighbors also have WiFi called "Linksys" then your device may be attempting to connect to the wrong WiFi.

Gain access to the routers admin section and see if:
- router name (SSID) is unique to your network
- a limit to # of connections is set to one (which would be odd)
- MAC filtering is enabled
- encryption passphrase is correct (if using encryption), try turning OFF encryption just for a test connection
- connection type (a, b, G) is correct for the device (if router set to G only then a b WiFi device can't connect)

Than you Mike T for response. I will pursue.
Best,
Jim Wilson.

I had the same issue-- sudden drop of channel and I have to reset to reconnect with WRT54G router. So I looked for solution from youtube.
I added heat sink on Broadcom chip and memory IC; and added 80 mm fan.
After that, I do not have to reset. It is not related with your neighbor's channel. Feel the temperature by touching the chip-- it is quite toasty.
IT IS NOT CAUSED BY YOUR SETTING.
When temperature of chip get hot, device resets to prevent from burning the chip.

I think that most people would be better off to buy a router that had sufficient cooling. The newer routers include adequate heat sinks, use convection cooling (hot air rises through router box, and exits top, drawing in cool air from the bottom, so you need to place them in a place that allows this to work), and other mechanisms. If you are using wireless, continuously to watch netflix, or play online games, like the PS3 example here, you can cause the "chips" in the router to use quite a bit of power and thus generate heat which can become a factor in the performance of the device if it can not maintain some level of cool.