Other Sellers on Amazon
+ $5.00 shipping
+ Free Shipping
+ $11.00 shipping
gearup OakRak Floor to Ceiling Storage Rack, Golden Pecan
|Price:||$124.99 & FREE Shipping. Details|
|You Save:||$35.00 (22%)|
- Enter your model number to make sure this fits.
- Racks can carry as many as 4 bikes
- Aesthetically pleasing
- No Permanent installation required
- Made from real American red Oak
- 200 lb. capacity
- Conserves space and provides excellent stability for up to 4 bikes plus our other add-on accessory kits
- Finished with a hand rubbed oil stain and finish
- Golden Pecan Finish
Frequently Bought Together
Customers Who Bought This Item Also Bought
CHOKING HAZARD -- This toy is a small ball. Not for children under 3 yrs.
CHOKING HAZARD -- Small parts. Not for children under 3 yrs.
|Item Dimensions||120 x 15 x 10 inches|
|Shipping Weight||14.1 pounds|
From the Manufacturer
Would you like to give feedback on images?
Top Customer Reviews
The one negative on it is that the bikes tend to act as levers when mounted, so a relatively light push on the seat or handlebar will make the whole assembly want to rotate on it's vertical axis. That also implies that the bottom or top could pivot out and the whole thing come crashing down.
To avoid that possiblity, I drilled two countersunk holes in the ceiling mount and, once in place under a beam, ran two 3" screws in there to secure it. With that insurance in place I'm perfectly confident of it's stability.
First and foremost, I would like to comfort anyone with a step through bike or mountain bike frame with a top tube that is not parallel to the ground that this storage rack WILL INDEED work for you. What's not explained in the product description is that the rubber coated "arms" that the bike frame rests on are two separate pieces for each bike, and one can be hung higher or lower than its companion arm to accommodate top tubes that are not at a 90 degree angle to the vertical body of the rack. My wife has a step-through cruiser that requires that the arms be placed at different heights; I have one arm placed at the top angle between the seat tube and the seat stay and the other arm positioned under the bottom down tube. For my mountain bike, both arms are under the top tube, but one side is about 3 cm (1.25") higher than the other. The fact that the frame is designed to accommodate these differences in frame types is immensely helpful.
Also, note that we have my mountain bike placed higher on the rack than my wife's cruiser, despite the fact that the cruiser weighs about 1/3 less than mine (yes, it's a heavy old Specialized Rockhopper, but it's a dang good bike). It's a lot easier for me to get my bike down from the higher position than it would be for my wife. Despite the higher weight placed approximately in the middle of the entire frame apparatus, the rack is sufficiently stable.Read more ›
Well the picture says it all- they all fell on my head, causing quite a headache literally. The floors were banged up, and while the bikes were fine, that's probably pure luck.
We followed mounting instructions exactly. I would be hesitant to trust this with more than two bikes- a shame
The two bikes I attempted to mount were a large Orbea Alma carbon fiber and a medium Klein Attitude. Our ceiling is 8' and the rack was about 12" away from the wall. No matter what combination I tried (Klein on top, Orbea on top, random equal settings for the arms, offset settings for the arms) I could never find one that allowed both bikes to be hung off the ground. In the attached photo(s) you can see the Klein is not even mounted off the ground and the Orbea's front wheel is hitting the stem.
There was no way to safely mount the Orbea higher considering the way the arms attach to the main part of the rack; there was really no provision to attach the arms to the upper part of the rack at all. I suppose that is for the best as that section was rather 'flexy' at that part anyway.
Both the Orbea and Klein have cables ran under the top tube and the rack's arms did not really allow for this setup. If you are okay with the weight of your bike crushing the cables, this will not be a concern for you.
The rack itself seemed well made (floor mount was slightly cockeyed to ceiling mount if anyone is OCD) although shipping left a little to be desired for. No part of the rack was protected in any way, instead it was all just shoved into an appropriate sized box and allowed to shift around during delivery. Obviously this does not bode well for finished wood parts.
I ultimately had to return it and am still looking for another solution.
If you have a ceiling that requires you to use close to the 10' max (which means that a significant length of the vertical is the extender arm exposed by itself, as opposed to the externder arm inside the main body), and you have 2 full-size bikes, it seems as though you can't avoid screwing the top bike rack pieces (or whatever they're called) straight into the exposed extender arm. At least this was the case with mine. The instructions provide no guidance for this instance, but I had 2 options. The first was to screw the rack holder to the small blocks, and then attach that to the outside of the extender arm. The second was to screw the rack holder directly into the extender arm, and then place the small block in between the 2 extender arm (in similar manner as you do when attaching the rack pieces into the main body. This second option is not a possible option if the placement of the left and right racks overlap at all (that is, if they aren't staggered more than 1 block length; this is because the screws from the left and right sides won't have enough length to thread all the way in). I had overlap, so I went with option 1. Doing so would've been perfect, except that there ends up being a little bit of the screw left exposed in the middle of the extender arm. I wish they had anticipated this problem, and had included additional small blocks in case. Extra blocks would also add to the stability of the unit when attaching the racks this high. I'll probably end up buying wood for that middle section that is exposed.
Other than that, it's all good. I'll also suggest that if anyone is concerned about stability, screwing the top of the unit to your ceiling, either through a stud or using drywall anchors, works well.Read more ›
Most Recent Customer Reviews
This bike stand is amazing! Its beautiful, easy to put together, works well for our two triathlon bikes. I would highly recommend for anyone looking to freeup floor space.Published 7 days ago by A. Price
This is a great bike rack. It looks nice. It's sturdy. And, there's a nice choice of stains. The worst thing about mygearip is the lack of customer service. Read morePublished 1 month ago by Kelly
My fiancé and I just moved into a new, smaller apartment so I decided it was time to finally pull the trigger on this thing (been eyeballing it for 2+ years), and boy am I... Read morePublished 2 months ago by Kris Cave
It takes 2 people to install because 1 holds it up while the other sits on floor to adjust the bottom screws, but it installed quickly and it was obvious what had to be done by... Read morePublished 2 months ago by Anon
Easily assembled and sturdy. Appearance and finish is plain but good for the rec room.Published 3 months ago by Ross Lonstein
Great product, easily assembled, perfect for what I need - I think I'm able to put a third bike on it!, and fast delivery. Read morePublished 8 months ago by Amazon Customer