INBLOOM - Compra ahora
No disponible por el momento.
No sabemos si este producto volverá a estar disponible, ni cuándo.
Agregado a

Lo sentimos; hubo un problema.

Hubo un error al recuperar tus Listas de Deseos. Por favor inténtalo de nuevo.

Lo sentimos; hubo un problema.

Lista no disponible.

docooler Controlador de carga solar de 10A 12V/24V, panel solar, regulador de batería, protección segura

4.0 de 5 estrellas 649 calificaciones

No disponible por el momento.
No sabemos si este producto volverá a estar disponible, ni cuándo.
Marca Anself
Voltaje 24 Voltios
Peso del artículo 132 Gramos
UPC 690494310480 888419059310 610393608280 791323611591 721762902059 519752982538 709127210056 614373055927 Ver más
Fabricante EVP-ELEC02

Información de producto

Dimensiones del producto 4,57 x 3,9 x 2,13 pulgadas
Fabricante EVP-ELEC02
ASIN B007VLMRP2
Número de modelo del producto H9194-LM
Opinión media de los clientes
4.0 de 5 estrellas 649 calificaciones

4.0 de 5 estrellas
Descatalogado por el fabricante No

Comentarios

docooler Controlador de carga solar de 10A 12V/24V, panel solar, regulador de batería, protección segura


¿Encontraste un precio más bajo? Avísanos. Aunque no podemos igualar todos los precios de los que nos avisan, usaremos tus comentarios para asegurarnos de que nuestros precios sigan siendo competitivos.

¿En dónde viste un precio más bajo?

Price Availability
/
/
/
/
Inicia sesión para proporcionar comentarios.

Opiniones de clientes

4 de 5 estrellas
649 calificaciones globales

Escribir opinión de este producto

Comparte tu opinión con otros clientes
Dead output in 7 days
4 de 5 estrellas
Dead output in 7 days
Stopped working in 7 days. My project consist of a 12 volt 5 watts solar panel, a 12 volt 7 amp battery, a 12 volt to 5V/2A power supply and the Docooler Solar Charge Controller. The load output worked sometimes, when it did my battery gets a full charge during the day, and supply my power supply during the night. However the controller NEVER show all 3 LEDs indicating full battery ( I tested the battery using a volt meter). Now on the 7th day all 3 LEDs stopped working and 1 to 2 volts on the load output. I then tried using it as a 24 volt setup, I got a 24V load output but still no battery level indication. UPDATE: I received a faulty one so the seller sent me a replacement and now after almost a year the replacement stopped working. No voltage on the load output. The seller quickly send a replacement but took a while to arrive because it came from China. It is working perfect, I guess I just got a faulty one the first time, I will upgrade to a 20 amps soon. The red LEDs indicating how much charge the battery has are very bright but they don't bother me, they actually gets brighter (one by one gradually) as the battery receives charge, so I can say I can "see" my battery charging.
Gracias por tus comentarios
Lo sentimos, se produjo un error
Lo sentimos, no pudimos cargar la opinión

Opiniones destacadas de los Estados Unidos

  • Calificado en Estados Unidos el 21 de junio de 2017
    This little charge controller has already been through a tough North Dakota summer- and is still working great!

    I thought for sure I was going to have to build a weatherproof enclosure for this as the sides are open for ventilation. I figured dirt and rain would have this system of the fritz in just days. But since this was an experimental system for solar powered pumps, I figured I might as well sacrifice this inexpensive controller to see where the limits are.

    To my surprise, the system has been wet, dirty and shocked hard when the 2X4 it was attached to fell over in a rain\wind storm. So far, it still works perfectly. It appears there is some sort of coating on the circuit board that insulates it from the environment! Whoever built this understood it's a field unit and designed it accordingly.

    The screws on the base can be tightened very tight to hold wire connectors securely- without stripping or breaking the device. The screws are made from plated metals to prevent corrosion and the base where the screws attach to is metal too. No worries about breaking this device with field use when you really need to torque the wires down hard. This has hard metal where it counts!

    The unit comes with two open holes on the side for screwing it onto a piece of wood. (Or you could even tack it on with a nail.)

    The drawing for connections is universal and obvious. If you can put in a car battery, you can install this with a solar panel and batteries.

    As to it's ability, I paired this with two recycled 8AH 12V Sealed Lead Acid (SLA) batteries. It does a better job charging these than my expensive battery "conditioner" that's 20 times bigger and heavier than this controller.

    It's meant to be paired with a solar panel and if you are looking for its match in ruggedness and price, check out the ECO-WORTHY 20 Watts Epoxy Solar Panel I reviewed. I got really lucky and found two very inexpensive systems that were both ideal matches for my tough applications.

    If you are looking for systems to use outside in a garden or farm environment, I recommend these two systems!

    Put the Eco-Worthy 20 watt epoxy solar panel (crazy tough- I seriously abused mine and it looks brand new,) with this controller and keep any small scale battery array or starting batteries fully charge all the time. Auto-detects 24V and 12V battery arrays, measures their charge state and decides to charge them when their is excess power. It also supplies the load with the solar cell when their is excess power and it won't let the batteries discharge below a recommend state while powering the load! That means it powers the load from the batteries at night and will turn the load off once the batteries reach their discharge point. So this is much more than just a charge controller! It's a smart load controller too!!!!!

    Great for fountains, security\gate systems, outdoor video, cars\trucks\tractors\mowers\motorcycles\ski mobiles or any other vehicle that will sit a while and needs to have it's battery charged.

    My application is for a small 12V water pump in garden. (Think small waterfall pump.) 350mA continuous water pump 24X7. Still going strong after a months use!
    A 21 personas les resultó útil
    Reportar
  • Calificado en Estados Unidos el 22 de junio de 2020
    I used this as a part of a home built solar LED light set up with a deep cycle battery. Overall I would say that following the clear and obvious pictures emblazoned on the device itself should be enough for most people to get this thing up and working. I did burn one of these devices by wiring it backwards. This is definitely my fault but made me realize this device does not have any methodology for protecting itself. So, user be warned. It's done what I've wanted it to do for the last few months of open testing. The LEDs in my second device were not seated very well in the flimsy plastics and were slightly sunken in making reading them from a greater angle harder. This was easily remedied by taking the device apart and reseating the LEDS in the correct position.

    Overall the product does what it says and I only took off a single star for the lack of protection from the stupid user and the fit and finish of the internals to the flimsy plastics that encase the electronics.
  • Calificado en Estados Unidos el 18 de enero de 2015
    I was using the charger controller that came with my solar panels. It was one of the cheap ones with 2 DC connector jacks on each side. However these went straight to the battery and had no way to turn on/off the load to prevent over-discharging. I wanted this feature because I noticed that the lights on my shed would become very dim in the winter days due to less daylight and longer runtime (lights turn on at dark). And the battery would be discharged to about 6v. So I figured, when the voltage hits the low threshold, the controller will shut off the load for one or two days until the battery is recharged

    I found this one on here advertising over-discharge protection, so I took a chance. It turns out, I didn't even need the over-discharge protection. My old controller was just not charging the battery as well. The days are still short, but the LED lights seem to stay bright. I haven't tested to see if it shuts off or not, but I assume it would.

    Some other notes about this charger:
    - The construction does feel a little cheap, but that doesn't seem to affect performance.
    - Charges the battery better than the free/cheap controllers that come free with panels.
    - The instruction manual has terrible english, but is understandable.
    - You must connect the battery, then the panels, then the load. This is so that the controller knows whether you are using 12 or 24v.
  • Calificado en Estados Unidos el 17 de octubre de 2016
    I'm a little confused. I took a brand new battery SLA 22ah (date code this month) charged it up with a very high quality CTEK type battery charger on my work bench, dropped in in a little Atwood box, wired up the charge controller and the charge controller shows 2/3 charge. If it doesn't show 100% and 3 LEDs now... when will it? pretty sure the battery is never going to be in better shape than it is right this minute. The little 10w panel I plan to use is only pushing 13.0V to it. I probably need to get a bit better panel on it if it really needs or want to see 14.4V to give me 3 red LED's.

    Next: The "load" LED lit as soon as I landed a pair of wires on it. No actual "load" just a pair of wires to an outlet. So that's probably not great.

    Finally: This thing is quite a bit larger than anticipated, that's not a defect just an observation and it won't fit inside the box as I had hoped.

    Well I see now by doing a little proper math that my panel is only giving me 4W @ 12V, so that's not awesome. I plugged little charger (not ctek) and got 3 lit LED's. Not for very long mind you, but it works.
    Imagen del cliente
    3.0 de 5 estrellas
    Dry camping phone charger

    Calificado en Estados Unidos el 17 de octubre de 2016
    I'm a little confused. I took a brand new battery SLA 22ah (date code this month) charged it up with a very high quality CTEK type battery charger on my work bench, dropped in in a little Atwood box, wired up the charge controller and the charge controller shows 2/3 charge. If it doesn't show 100% and 3 LEDs now... when will it? pretty sure the battery is never going to be in better shape than it is right this minute. The little 10w panel I plan to use is only pushing 13.0V to it. I probably need to get a bit better panel on it if it really needs or want to see 14.4V to give me 3 red LED's.

    Next: The "load" LED lit as soon as I landed a pair of wires on it. No actual "load" just a pair of wires to an outlet. So that's probably not great.

    Finally: This thing is quite a bit larger than anticipated, that's not a defect just an observation and it won't fit inside the box as I had hoped.

    Well I see now by doing a little proper math that my panel is only giving me 4W @ 12V, so that's not awesome. I plugged little charger (not ctek) and got 3 lit LED's. Not for very long mind you, but it works.
    Imágenes en esta reseña
    Imagen del clienteImagen del clienteImagen del clienteImagen del cliente

Opiniones más destacadas de otros países

Traducir todas las opiniones al Español
  • Amazon Customer
    5.0 de 5 estrellas Economies solaires
    Calificado en Canadá el 22 de septiembre de 2019
    Controle bien le niveau des batteries.
    Reportar
  • ramon
    5.0 de 5 estrellas ok
    Calificado en España el 13 de junio de 2021
  • customernumbernine
    5.0 de 5 estrellas Best choice for small projects
    Calificado en Reino Unido el 2 de octubre de 2017
    This unit has proven itself in use and works exactly as described. Other users have complained about it not working or failing in use but my suspicion is that - at the price - it is not designed for huge installations. I have used it to charge a car battery with a 12v / 20W solar cell and it has been faultless. Easy to understand instructions and easy to install.
  • Philippe GUITTENY
    5.0 de 5 estrellas Simple et efficace
    Calificado en Francia el 11 de junio de 2014
    J'ai deux panneaux équipés de ce chargeur/régulateur; 1 en 24V pour mon portail, 1 en 12V pour mon éclairage d'atelier.Connectique siimple et solide, Affichage et fonctionnement simple. Très bon produit pour ce prix, je n'hésierais pas à en acheter un suppléme ntaire si besoin.
  • 吾都夢
    5.0 de 5 estrellas ランクル200でオートキャンプに最高!
    Calificado en Japón el 3 de julio de 2015
    (●^o^●)商品は届きました.この商品は,ランドクルーザー200(CBA-URJ202W)でのオートキャンプ時に使用し,ジャストでした.(^○^)キャンプ用品のブランド(スノーピーク,コールマン,ユニフレーム,ソト,グリベル,ロゴス,キャプテンスタッグ,ジェントス,スント,ビクトリノックス,ドッペルギャンガー,ノースフェイス,パタゴニア,モンベル,マーモット,エバニュ-,オガワキャンパル,ハイマウント,エイアンドエフ,等)は沢山ありますが,このブランドが一番,安価ですし,機能的で最高に良いですしデザインもカッコ良いです.そして,沢山のアウトドア ショップがありますが,このブランド,商品を扱っているところは,あまりありません.ですからオートキャンプで,誰かとカブル事は少ないでしょうから所有する満足度感や,喜びがあります!納得出来る一品です.皆様に御勧めの商品ですから御購入を御考えの方は参考にして下さいね!