I’m a bit OCD about making sure the door is locked before I leave home. My wife gets a good chuckle out of it, and is sometimes gets annoyed. What’s worse is getting somewhere and then worrying about whether or not you locked the door. Should you jump in your car to run back to check it? Are you just being paranoid? Can you enjoy whatever you’re doing without worry about your doors being unlocked?
The Schlage Z-wave Camelot door lock eliminates those questions. The touch panel gives you a positive checkmark when the door locks, and if you’re out and about when you start worrying whether or not you’ve locked the door, just pull out your phone and check. If it’s not locked, simply slide it to the locked position and be assured that the command has been received and executed at home.
The lock has a lot of great features. It can autolock after being open for 30 seconds. It has alarms for tamper and break-in with various sensitivity levels. You can use the open/close status in a Wink robot. You can assign different codes to different people. And you don’t have to worry about getting locked out of the house without your keys.
Now, if only pairing with Wink were simple. In theory, it’s supposed to be. In reality, it can cause hours of frustration. If these tips had been spelled out, it would have been very helpful:
- Move your Wink hub as close to the lock as possible when starting the pairing. I thought 10 feet line of sight would be fine, but it wasn’t.
- Be sure you put brand new batteries in the lock when you start pairing. Don’t rely on the batteries that came with the lock, even if they’re brand new. I worked for a day and a half on one lock. It wouldn’t pair even with the Wink hub 18” from the lock. I finally used a DMM to check the battery voltage. It was 5.97, so I shrugged, thinking it was fine. Later, out of desperation, I decided to change the batteries. With new batteries, the voltage was 6.28, and the lock paired almost instantly.
- The Schlage Z-wave relay doesn’t really improve the reception
- The Wink app will often say it has paired with the lock, but the green checkmark on the lock doesn’t confirm the pairing. The Wink app is wrong—the lock isn’t paired.
- Be sure to use the Z-wave exclude command to delete the lock upon an unsuccessful pairing. This came directly from the Wink help support line. They claimed the exclude feature is more complete at removing the prior failed pairing parameters.
- When the lock finally successfully pairs, you may not see an accurate battery level indicator for many hours. This parameter took overnight to read correctly on both my locks.
- When you are paired correctly, the locked status should show up in about 4-8 seconds in the Wink app after you’ve opened or closed the lock. Also, changing the lock’s settings, such as the security or number of digits for entry codes, should receive confirmation in the app within 10-20 seconds.
- Note that you can’t run the locks through either the scheduler or robots, but you can include them in Wink shortcuts. Wink claims this is for security and safety consideration.
- The activity report only shows when the lock has been opened with the Wink application, not when it’s been manually unlocked or when someone has entered with a code. This was quite surprising to me as it means there’s little point to the log. If you have a robot set up you will get a notification on your phone when the lock toggles, depending on what you request.
Pros for the lock:
- It’s easy to install.
- No one has had problems learning how to enter their codes.
- It seems quite sturdy and comes with a strike plate that certainly exceeded the security of my doorframe original equipment.
- I think it looks great, though my wife thinks it makes the doors look like hotel doors.
- The auto-lock feature wherein the lock shuts automatically in 30 seconds is appreciated. Just be sure your door is closed when the lock slams home.
Now, some cons for the lock:
- The lock only reports the deadbolt’s extended or retracted status. If the door is not closed, but the deadbolt is extended, the lock will say it’s closed. It would be great for the lock to actually sense whether it’s mated to the strike plate.
- Using the button on the back to turn on and off the alarm or set the mode never worked very well for me. Maybe I just couldn’t get the hang of it from the instructions. The Wink app works much better to set the alarms.
- The tamper alarm is very sensitive. I have the “bludgeon” (forced entry) mode activated.
- The programming code for the lock is only 6 digits long, yet you can program in 8 digit entry codes. What’s the point of 8 digit entry codes when guessing the right programming code can get the burglar in the door? Come on, Schlage, the programming code should be 8 digits!
- There’s a bit of a security risk since Wink could be hacked, but then again, it’s not hard to pick a lock if you know what you’re doing. Someone who really wants in will just break a window.
All in all, I’m pleased with the locks.
Update Sept 2015: My Wink hub was damaged by a transient caused by the power company and wouldn't connect to Wifi. There was no way to delete the existing devices from the old hub. Eventually, Wink deleted my account and let me start again with a new hub. I had to use the Z-wave Exclude function to delete this lock. You don't have to reset the lock to "factor condition." Just exclude the lock under the Hub's Z-wave commands, then use the inclusion mode to re-add. If you use the inclusion mode rather than the Add Lock command in the Wink app, you get Schlage specific options such as add users, set alarm types, etc.
After initial protest, my wife loves the lock. It lets her get into the house without fumbling through her purse for her keys.
| Brand | SCHLAGE |
|---|---|
| Special Feature | Keyless Features |
| Lock Type | Keypad |
| Item dimensions L x W x H | 4.5 x 5.13 x 9.25 inches |
| Material | Metal |
| Recommended Uses For Product | Residential single family door security |
| Style | Camelot |
| Color | Satin Nickel |
| Finish Type | satin |
| Included Components | Schlage Connect Camelot Touchscreen Deadbolt With Built-In Alarm, User Guide, Schlage Connect Deadbolt, 4-Aa Batteries, Be469 Cam 619, Installation Instructions, Satin Nickel, 1-Back-Up Key |
| Controller Type | Nexia, Vera, Wink, Amazon Alexa, SmartThings |
| Shape | Rectangular |
| Item Weight | 3.8 Pounds |
| Control Method | Voice |
| Connectivity Protocol | Z-Wave |
| UPC | 043156312214 |
| Global Trade Identification Number | 00043156312214 |
| Manufacturer | Schlage Lock Company |
| Part Number | BE469NXCAM619 |
| Item Weight | 3.8 pounds |
| Product Dimensions | 4.5 x 5.13 x 9.25 inches |
| Item model number | BE469NXCAM619 |
| Batteries | 4 AA batteries required. (included) |
| Is Discontinued By Manufacturer | No |
| Size | full |
| Finish | satin |
| Power Source | battery-powered |
| Item Package Quantity | 1 |
| Number Of Pieces | 1 |
| Special Features | Keyless Features |
| Batteries Included? | Yes |
| Batteries Required? | Yes |
| Battery Cell Type | Alkaline |
| Average Battery Life | 8760 Hours |
| Warranty Description | Lifetime Limited Mechanical & Finish and 1-Year Warranty |
