| Item Dimensions LxWxH | 23.3 x 3.1 x 1.6 inches |
|---|---|
| Brand | MICTUNING |
| Form Factor | Bar |
| Auto Part Position | Front Outside |
| Item Weight | 1.9 Pounds |
| Water Resistance Level | Waterproof |
| Remote Control Included? | No |
| Number of Pieces | 1 |
| Manufacturer | MICTUNING |
| Item Weight | 1.9 pounds |
| Product Dimensions | 23.3 x 3.1 x 1.6 inches |
| Item model number | MIC-5DP100 |
| Is Discontinued By Manufacturer | No |
| Manufacturer Part Number | MIC-5DP100 |
| Amperage | 2.5 Amps |
| Wattage | 100 watts |
Products related to this item
Page 1 of 1Start overPage 1 of 1
Compare with similar items
This Item  MICTUNING LED Light Bar 21 inches 100W Single Row Spot Flood Combo Driving Fog Light 2 Styles Mounting for Off Road Truck SUV ATV Car Boat |  |  |  | |
| Price | Currently unavailable. | $52.16 | $16.89 | $29.99 |
| Delivery | — | — | Get it as soon as Friday, Apr 26 | Get it as soon as Friday, Apr 26 |
| Customer Ratings | ||||
| Water resistance | ||||
| Easy to install | ||||
| Brightness | ||||
| Sold By | — | Amazon.com | Nefeida | Winpower |
| light source type | LED | LED | LED | LED |
| color | — | White | Black, Transparent | black |
| compatible vehicles | 4x4, Off Road, SUV, ATV, Truck, Car, Boat, RZR | Car, Van, Motorcycle, ATV, Truck, SUV, UTV | Car, Motorcycle, ATV, Trailer, Truck, Tractor, Bus, SUV, UTV | truck, car, motorcycle, SUV, ATV, UTV, boat |
| number of pieces | 1 | 1 | 1 | 1 |
| remote included | ✗ | ✗ | ✗ | ✗ |
| auto part position | front outside | front | inner | front |
| fit type | Universal Fit | Universal Fit | Vehicle Specific Fit | Universal Fit |
| water resistance | waterproof | waterproof | waterproof | waterproof |
Products related to this item
Page 1 of 1Start overPage 1 of 1
Reviews with images
21" Fits the Nissan Frontier Gen2 lower grill like it was made for it- uses existing holes / no drilling!! Acceptable quality.
21" FITS 2012 (all Gen2) Nissan Frontier grill opening like a glove! And easy too, fits into existing holes!! Quality is "typical" for this price range of light bar. Some of the led lenses are off center, case build quality is better than average but not "Rigid" level. Lights up fairly bright but these are not high-end CREE chips like XB-D. I'd say is it priced right but certainly NOT a $250+ level of light bar.I'll be in the snow next week so we'll see how it does with extreme temps and condensation.Frontier owners! this is the EASIEST light bar to install- I guess any 21" light bar will work due to the specific length and location of the side mounts. Look in your lower grill opening, on the inside top you will see three plastic rivets that hold the upper bumper plastic. the left side and right side plastic rivets pop out, and there is a perfect 1/4" hole for bolts / nut to mount this up. Already centered too!You'll have to shave down some of the middle vertical plastic support piece but that's 30 seconds with a dremel. You'll see what I mean when you hold the light bar in the grill opening, the back of light bar will slightly hit the center vertical support. shave off 1/4" of it toward the top for clearance. This install was literally 10 minutes and is rock solid sturdy. the slim LED bar still lets plenty of airflow to the radiator.You can drop the front license plate lower by removing the plate mount from the bumper, turn it upside down, trim it a bit on the top facing edge and on the bottom lower sides so it sits straight, and use the same mounting bolts. Looks pretty much factory when done.
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
Reviewed in the United States on May 8, 2017
Reviewed in the United States on March 1, 2017
Absolutely stunning product. Installed on the hood of a Jeep Wrangler JK
Reviewed in the United States on March 1, 2017
Absolutely stunning product, great value for the money. We installed this for Bobbie's birthday on our YouTube channel #BubbasGarageTv. The package came with two types of mounting brackets. As we were installing this on a 2016 Jeep Wrangler JK we opted for the Rough Country hood mound brackets designed for the Jeep JK. The light bar was a perfect fit and looks really good too. The chrome capped screws on the front match well with our 50 inch light bar. The package did not come with a wiring kit but that was ok as we already had a A-Pillar switch pod in stalled with relay so it worked out great. Great Value in this product. Thanks so much. Feel free to check out our YouTube channel for the install video.
Reviewed in the United States on March 1, 2017
Images in this review
Reviewed in the United States on January 2, 2018
Reviewed in the United States on June 23, 2016
I mounted this light to the hood of a 2015 Jeep Wrangler. I've had no problems with moisture or any difficulty with the light at all. It seems to be very solidly made and the light output is excellent. You can see a nit on a nats ass from 100' at night. I would say overall it's a great product. Make sure you tighten all the hex/allen lens screws snug before installing.
Update: 9/7/16 - Still no moisture in the light. Good product so far.
Update: 9/7/16 - Still no moisture in the light. Good product so far.
Images in this review
Reviewed in the United States on January 7, 2018
Reviewed in the United States on October 24, 2017
Reviewed in the United States on November 19, 2015
I'll be in the snow next week so we'll see how it does with extreme temps and condensation.
Frontier owners! this is the EASIEST light bar to install- I guess any 21" light bar will work due to the specific length and location of the side mounts. Look in your lower grill opening, on the inside top you will see three plastic rivets that hold the upper bumper plastic. the left side and right side plastic rivets pop out, and there is a perfect 1/4" hole for bolts / nut to mount this up. Already centered too!
You'll have to shave down some of the middle vertical plastic support piece but that's 30 seconds with a dremel. You'll see what I mean when you hold the light bar in the grill opening, the back of light bar will slightly hit the center vertical support. shave off 1/4" of it toward the top for clearance. This install was literally 10 minutes and is rock solid sturdy. the slim LED bar still lets plenty of airflow to the radiator.
You can drop the front license plate lower by removing the plate mount from the bumper, turn it upside down, trim it a bit on the top facing edge and on the bottom lower sides so it sits straight, and use the same mounting bolts. Looks pretty much factory when done.
21" Fits the Nissan Frontier Gen2 lower grill like it was made for it- uses existing holes / no drilling!! Acceptable quality.
Reviewed in the United States on November 19, 2015
21" FITS 2012 (all Gen2) Nissan Frontier grill opening like a glove! And easy too, fits into existing holes!! Quality is "typical" for this price range of light bar. Some of the led lenses are off center, case build quality is better than average but not "Rigid" level. Lights up fairly bright but these are not high-end CREE chips like XB-D. I'd say is it priced right but certainly NOT a $250+ level of light bar.Reviewed in the United States on November 19, 2015
I'll be in the snow next week so we'll see how it does with extreme temps and condensation.
Frontier owners! this is the EASIEST light bar to install- I guess any 21" light bar will work due to the specific length and location of the side mounts. Look in your lower grill opening, on the inside top you will see three plastic rivets that hold the upper bumper plastic. the left side and right side plastic rivets pop out, and there is a perfect 1/4" hole for bolts / nut to mount this up. Already centered too!
You'll have to shave down some of the middle vertical plastic support piece but that's 30 seconds with a dremel. You'll see what I mean when you hold the light bar in the grill opening, the back of light bar will slightly hit the center vertical support. shave off 1/4" of it toward the top for clearance. This install was literally 10 minutes and is rock solid sturdy. the slim LED bar still lets plenty of airflow to the radiator.
You can drop the front license plate lower by removing the plate mount from the bumper, turn it upside down, trim it a bit on the top facing edge and on the bottom lower sides so it sits straight, and use the same mounting bolts. Looks pretty much factory when done.
Images in this review
Reviewed in the United States on January 17, 2018
This is an all-around well-built lightbar. It comes with excellent hardware and everything you need besides a direct template to install it on your vehicle, however it has one fatal flaw. As pictured below the air vents cut into the sides and where the cord comes out of the light for clearance causes a tremendous amount of whistling when mounted forward facing or rear facing so that the wind blows through these holes. I have confirmed that the holes are causing the whistling by putting Gorilla tape over the side Vents and under where the cord comes through for it's cut out the whistling stops. It's a great light so my work around was to use marine-grade black sealant in the side vent holes and under the cord however it now has less ability to drain in the event of rain. Mictuning if you're reading this perhaps change the design of your side vents so that the air flows through the holes on the sides instead of across to prevent the Whistling noise in future designs.
Great amount of light and easy to hook up, TERRIBLE WIND NOISE! easy fix
Reviewed in the United States on January 17, 2018
Update: 30 Jan 18. One of the two bars now has water in it.. goin to have to break it open and re seal it..Reviewed in the United States on January 17, 2018
This is an all-around well-built lightbar. It comes with excellent hardware and everything you need besides a direct template to install it on your vehicle, however it has one fatal flaw. As pictured below the air vents cut into the sides and where the cord comes out of the light for clearance causes a tremendous amount of whistling when mounted forward facing or rear facing so that the wind blows through these holes. I have confirmed that the holes are causing the whistling by putting Gorilla tape over the side Vents and under where the cord comes through for it's cut out the whistling stops. It's a great light so my work around was to use marine-grade black sealant in the side vent holes and under the cord however it now has less ability to drain in the event of rain. Mictuning if you're reading this perhaps change the design of your side vents so that the air flows through the holes on the sides instead of across to prevent the Whistling noise in future designs.
Images in this review
