Dieser Artikel kann nicht an den von dir ausgewählten Zustellungsort versendet werden. Bitte wähle einen anderen Zustellungsort aus.
Liefern nach Österreich
Hinzugefügt zu

Es ist ein Fehler aufgetreten.

Es gab einen Fehler beim Abrufen deines Wunschzettels. Versuche es noch einmal.

Es ist ein Fehler aufgetreten.

Liste nicht verfügbar.

ADS1256 24bit 8-Kanal ADC AD-Modul Hochpräzise ADC-Erfassungsdaten

4,1 4,1 von 5 Sternen 8 Sternebewertungen

Dieser Artikel kann nicht an den von dir ausgewählten Zustellungsort versendet werden. Bitte wähle einen anderen Zustellungsort aus.
  • Integrierte hochpräzise TI ADS1256IDB ADC-Chips
  • On-Board ADR03 2,5 V Datenspannungsquellen-Chips
  • Datenausgangsraten bis zu 30 ksps, Nichtlinearität ist niedrig bis ± 0,0010 %
  • Das Modul kann entweder als 8 einseitige Eingänge oder 4 Differentialeingänge konfiguriert werden
  • Das ADS1256-Modul ist geeignet für die Messung analoger Spannung innerhalb von 3 V
Hinweis: Produkte mit Elektrosteckern sind für den Einsatz in den USA konzipiert. Steckdosen und Voltzahlen sind je nach Land unterschiedlich. So ist für dieses Produkt möglicherweise ein Adapter oder Konverter erforderlich, damit es an Ihrem Zielort genutzt werden kann. Bitte prüfen Sie vor dem Kauf die Kompatibilität.

Du suchst nach bestimmten Informationen?

Kundenrezensionen

4,1 von 5 Sternen
8 weltweite Bewertungen

Spitzenrezensionen aus USA

Bewertet in den USA am17. November 2022
If you thought the 16Bit ADC1115 is impressive, play with this one. Amazing resolution with 24Bits in little more than 1.3"x2.25" PCB. It took a while to get the software driver configured and get familiar with the ADC1256 internal registers. But, once the ADC is up and running, the performance of this little board is impressive. I am using two differential channels, input signal of +/- 5 millivolt, and 24X gain.
Eine Person fand diese Informationen hilfreich
Melden
Bewertet in den USA am30. Oktober 2018
I'm using it for 4 differential channels sampled at 1000 Hz; a Raspberry Pi 3B+ keeps up with ~ 10% timing margin. It works fine in my test jig. The board is missing a rather important pin for external connections: 2.5V reference (buffered). I expect to solder directly to the IC for it, but have not yet done so. I will drive the ADC channels with INA159 amps, and need 2.5V for their reference inputs and the ADC -inputs -- that will give +-10V input range with just the +5 power supply.
2 Personen fanden diese Informationen hilfreich
Melden
Bewertet in den USA am2. August 2018
The two connector rows are not sitting on a 100mil grid, which makes it hard to use this device on breadboards without putting strain on the connectors. This is a trivial oversight that should not have happened. I haven't tested the electrical function, yet, but I hope it's better than the mechanical design of the PCB.
4 Personen fanden diese Informationen hilfreich
Melden
Bewertet in den USA am13. Mai 2019
Its very important for my ecg project, I am development a project in machine learning, and the precission of adc is vital
Eine Person fand diese Informationen hilfreich
Melden
Bewertet in den USA am13. Januar 2020
Muy buen producto