This USB meter is very powerful. Build quality looks good. The large TFT screen helps to read easily. It has some common features like monitoring voltage, current, energy, power, capacity, and time with high accuracy. It also has wide operating range of 3.7-25V, 0-5A but a low quiescent current of 1mA@5V. Moreover, it has built-in clock and temperature sensor while most of the other usb meters don’t. Like some other usb meters, it supports dual-way detection thus don’t have to plug the input cable into the IN port, but the OUT port works as well. Furthermore, it has 5 different views of the home screen including everything on one page, D+ D- voltages & current direction & possible + current charging protocols, time and energy consumption, simple look with large fonts, and black screen. And It will automatically enter power saving screen when idle.The electronic load is fairly easy to use. Turn the knob clockwise/counterclockwise to increase/decrease the current. The fan will automatically turn on when the temperature is higher than 40℃ to keep it cool. Good for performing stress test on a power adapter or measuring the capacity of a power bank.Next is the advanced part I’d like to comment in detail.[Operations]All operations are carried out with the scroller.>Short press - switches/enters/confirms>Long press - enters the main menu>Double press - enters the charting mode/exits to the home screen>Short turn forward/backward - enters a mode/scrolls through menu options/triggers an action/increases or decreases a value>Long turn (turn and hold) forward/backward - enters a mode/scrolls through menu options/triggers an action/increases or decreases a value[Groups]Short turn forward to clean the current group.Can switch between 5 groups for different tests.[Charting]Double press to enter, short press to switch between V-A and Vd+/Vd-.Draws a V-A or Vd+/Vd- chart with real-time data at a selected sample rate[FastCharge Trigger]UNPLUG any device before doing this as it may DAMAGE your device!Short turn backward to enter. Short turn forward/backward again after the red warning message flashes three times. Short turn backward once more to release if triggered.Triggers different voltages that a power supply can deliver.>QC2.0 - triggers 5/9/12/20V if supported.>QC3.0 - triggers 5-20V, increases/decreases 200mV per time, if supported>Auto Detect - automatically detects the charging technologies the power supply supported and shows them in green. Helps to pick a power supply with high compatibility.>Apple 2.4A - makes a regular charger to charge like an apple 2.4A charger. Lets a regular charger charges an apple device faster.>Apple MFI Test - checks if a lightning cable is MFi certified. Helps to pick a good lightning cable. (Needs a QC3.0 charger)>Power Delivery - checks the PDOs the PD charger offered and triggers the voltages (Needs to turn on the PD trigger switch first)>HUAWEI FCP - triggers HUAWEI FCP voltages 5/9V.>Samsung AFC - triggers Samsung AFC voltages 5/9V.[Cable Resistance Test]Long turn backward to enter. Needs to use with the electronic load together to adjust the output current to 500mA or greater.Tests the ESR of a usb cable. Usually a better cable has a lower ESR.In addition, a lot of settings can be found in the main menu. It’s awesome that a firmware update will bring more new features. It’s really a combination of all my current usb meters/triggers with even more features. Powerful and useful. I wish bluetooth connection and PC/Smartphone apps would be found in a later version of this product.(I did everything pretty quick in the video to save your time.)------------- UPDATE 12/27/2017 -------------CT-2 Part[Independently/Externally Powered]Powered via the Micro USB port. Can measure DC 0.1-26V with this. Useful to check Ni-MH rechargeable batteries.[Offline Curve Recording]Short turn forward to enter.Records the voltage and current points. Will generate a curve diagram when finished recording. A charge curve helps determine if a charger is good. Also, the curve records can be accessed in the PC app.[PC App]Shows the curve diagram directly. Can save/export the curve diagram to a file and open the diagram recorded on the meter or computer.Tracks the communication between a charger (source) and a device (sink) with PD Listen. Will let you know how a PD charger charges a device. Needs the PD Tester switch to be turned on.Boot logo and theme can be easily customized here.Can perform firmware update here as well.I also updated the video.I am looking forward to the next version!