Review of the MEANWELL LRS-350-24 DC switching power supplyTL;DR - The Meanwell power supply (sold by Hybridge) is a solid performer. Nice, slim case, able to fine-tune the voltage, and very clean looking inside. A solid buy.Received the product in a timely manner. Boxed nicely, and included mounting feet (which is nice). Picture one reflects that. The unit is input voltage switchable (115v or 230v)The unit internally has a nice clean layout. I did not look on the underside of the circuit board, only the top (pictured) side.The fan is removable (if you wish to add another). 60mm square, 15 mm thick. There was a mention that the fan seems a bit loud, and I would concur. Also, trying to determine what triggers the fan to come on. The docs seem to indicate based upon thermal temperature, but it would also appear to be based upon current draw. If I pull 6amps on the unit (out of 15) the power supply doesn't get warm however, the fan will kick on anyhow. It does seem variable in that if I decrease the load, the fan slows down. Fortunately, I have this mounted in a closet so it is not noticeable.One other mention about the fan. It is an ARX DC Brushless, 12v 0.13a, 15 cfm fan. If you google for that fan, it is sold on here for like $24 - $27 (elsewhere $16 to $18). For a basic fan, seems quite high in price considering the noise it produces.The power supply has external access to a trim-pot allowing to tweak the desired voltage. I took several voltage measurements of the unit itself (One of the pictures I combined all the differences to). Ultimately, there is a +/- of almost 5v swing.For a brief, I observed the following:24.19v - out of the box measurement20.89v - Adjusted all the way down29.94v - adjusted all the way up.Upper-right image on the measurement picture was just me setting it to 24v when I was done measuring.There are 6 terminals for output (3 for positive(+), 3 for negative(-)). There are three terminals for the main voltage (Neutral, Line, ground). About the only ding I give here is that unlike other power supplies on the market, the Meanwell does not come with that little plastic swing cover to cover over the terminals.I have a 6 amp load of LED strips, and wanted something that could handle double-that in the future, so I ended up with the 15amp (14.6a technically) power supply (leaving me 20% overhead so not ever fully loaded, which is how you should plan your projects). Final two pictures show's the supply working, and my mounted project :)All in all, I am happy with the purchase. It does what it is supposed-to.