Currently unavailable.
We don't know when or if this item will be back in stock.
Deliver to Austria
Added to

Sorry, there was a problem.

There was an error retrieving your Wish Lists. Please try again.

Sorry, there was a problem.

List unavailable.

Toolour Magic Arm Camera Mounts Clamps w/ 1/4" and 3/8" Thread, 19.7” Adjustable Friction Power Articulating Arm with 2.6" Super Clamp for LCD Monitor/LED Light/Camera Video Rig/Smartphone

3.6 3.6 out of 5 stars 49 ratings
Currently unavailable.
We don't know when or if this item will be back in stock.
Brand Toolour
Color Black
Compatible Devices webcam stand/camera/phone/LCD monitor/LED light/ Video Vlog Rig through one end 1/4" screws.
Compatible Phone Models camera smartphone
Mounting Type Handlebars/Tripods/Tabletops etc.

About this item

  • 【19.7" Magic Arm】 The long articulating arm camera mount clamp comes with a 19.7" adjustable friction hinged magic arm, with 1/4" screws at both ends, which can be installed with LCD monitor/LED light/ Video Vlog Rig through one end 1/4" screws. Meshing teeth design in the middle, provide more stability and security, easily tighten the joint of magic arm by turning the hi-torque screw. The extra-long magic arm can better meet your needs for length.
  • 【2Pcs Multifunction Super Clamps】The camera mounting clamp magic arm has two metal clamps: 2.16”/55mm (max) camera clamp with 1/4" and 3/8" threads, 2.56”/65mm (max) bidirectional (horizontal/vertical) metal table desk clamp. The camera mount clamps are made of lightweight aluminum alloy, which is more durable. The 2.16” super clamp with threads can be mounted virtually anywhere, such as cameras, lights, umbrellas, hooks, shelves, plate glass, cross bars, even other Super Clamps.
  • 【360° Rotation Ball Head】360° ball head articulating design adjusts any angles based on your needs. With 1/4" thread on both ends to install any on-camera flash lights, microphone, LCD monitor, DV Monitor, microphone on one end and other accessories like cage, NATO Rail 1973, 15mm Rod 1182 and Quick Release Rod Clamp 1976 etc. (Note: Optimum load bearing weight of magic arm: less than 2.2 lbs / 1KG.)
  • 【Replaceable Rubber Pads】The mount clamp and the metal clamp have soft rubber pads to prevent the monitor from scratching, and it can clamp objects more firmly to prevent movement. Comes with replaceable rubber pads, so you don’t need to worry about rubber pads abrasion after prolonged use.
  • 【What You Get】You will get: 1 x 19.7” Magic Arm; 1 x Camera Mounts Clamps w/ 1/4" and 3/8" Thread; 1 x 2.56" Metal Clamp; 2 x Replaceable Rubber Pads of Camera Mounts Clamp. KINDLY NOTE: Loosening and tightening the center knob of both articulating arms also loosens and tightens the swivels ends of the 1/4" thread. If you find the ends are unstable after the mount, please make sure the center knob is tightened.
  • 【100% Satisfaction Service】We have products 100 percent quality inspection, and all customers have 30 days of exchange or return policy and promise to provide a 1 year aftersales service. If you encounter missing or wrong accessories, or any quality problems of this camera mount friction arm, please feel free to contact us for unconditional reissue or replacement, we will do our best to solve the problem for you.
› See more product details
Note: Products with electrical plugs are designed for use in the US. Outlets and voltage differ internationally and this product may require an adapter or converter for use in your destination. Please check compatibility before purchasing.

Similar item to consider

Amazon's Choice
4.5 out of 5 stars (6008)
$12.34

Product Description

4254

19.7” Magic Arm, Camera Mounts Clamps w/ 1/4" and 3/8" Thread, Adjustable Friction Power Articulating Arms with 2.6" Metal Clamp for LCD Monitor/LED Light/Camera Video Rig/Smartphone

  1. The 19.7" super long magic arm can better meet your needs for length and space.
  2. Both ends of the magic arm are equipped with 1/4" screws. The articulating arm can connect the monitors via a 1/4" screw at one end, and the other end can connect the desk clamp or accessory with 1/4"-20 threaded hole.
  3. The articulated arm adopts an ergonomic wing nut, which is very convenient and can help you adjust any angle according to your needs.
  4. Both camera mount clamp and articulating magic arm are equipped with rubber pads to protect the monitor from scratches and help lock the monitor tighter.
  5. It could be attached and detached from the monitor quickly and the position of the monitor is adjustable as per your needs during shooting.
  6. After using the clamp for a long time, when the rubber pad on your clamp is damaged, the attached rubber pad can be replaced, there is no need to worry about the problem that the clamp can no longer be used due to the damage of the rubber pad.
  7. The camera mounting clamp has 1/4"-20 and 3/8"-16 threads. It can open up to 2.16"/55mm, and the minimum is 0.6"/15mm.
  8. The metal desk clamp can open up to 2.56"/65mm.
  9. Maximum load weight is 2.2lbs. / 1kg.

4684

4654

689

The 19.7" super long magic arm can be rotated 360°, which can better meet your needs for length and various angles.

Due to the long-term use of the clamps, the rubber pads were broken and falling off. The additional 2Pcs replaceable rubber pads perfectly solve this problem.

The camera mounting clamp has 1/4"-20 and 3/8"-16 threads. It can open up to 2.16"/55mm, and the minimum is 0.6"/15mm.

165456

1645

46

The maximum load-bearing capacity of the clip is: 1 KG / 2.2 LB.

Multifunctional magic arm can be used for installing LCD display/LED light/Phone/Video Vlog Rig and other equipment.

Multifunctional magic hand with 2.16" super clamp can be used for clamping welding products such as PCB/hot air gun/solder wire.

468

The Perfect Camcorder Mount

  • This is a necessary camera or smartphone shooting device for road trips to capture your happy and wonderful moments.
  • 360° adjustable ball head design on both ends with standard 1/4-screw, provide multi-angle shooting, suitable for camcorder, action camera, photographic light, tripod, slide car equipment, monitor camera
  • Meshing teeth design in the middle, provide more stability and security , easily tighten the joint of magic arm by turning the hi-torque screw.
  • Attach with high-torque screw, video adapter, super wide smartphone clip, compatible with gopro or gopro-action camera and most of the smartphone in the market.

1654

Specification:

Main material: aluminum alloy + stainless steel

Magic arm length: 19.7in / 500mm

Camera mounting clip length: 2.16in / 55mm (max)

Length of metal table clamp: 2.56in / 65mm (max)

NOTE: Loosening and tightening the wing nut of both articulating arms also loosens and tightens the swivels ends of the 1/4" thread. If you find the ends are unstable after the mount, please make sure the center knob is tightened. And ensure remove items of the end safely, please remember to support what ever is on the end when you loosen the wing nut.

Package Include:

  • 1 x 19.7” Magic Arm
  • 1 x 2.16” Camera Mount Clamp
  • 1 x 2.56" Metal Clamp
  • 2 x Replaceable Rubber Pads of Camera Mount Clamp

Product information

Feedback

Toolour Magic Arm Camera Mounts Clamps w/ 1/4" and 3/8" Thread, 19.7” Adjustable Friction Power Articulating Arm with 2.6" Super Clamp for LCD Monitor/LED Light/Camera Video Rig/Smartphone

Found a lower price? Let us know. Although we can't match every price reported, we'll use your feedback to ensure that our prices remain competitive.

Where did you see a lower price?
/
/
/
/
Please sign in to provide feedback.

Looking for specific info?

Customer reviews

3.6 out of 5 stars
49 global ratings

Customers say

Customers like the sturdiness of the product. They mention it's solid and doesn't sag at all. However, some customers have reported that the weight capacity is low, the thread quality is poor, and the ease of movement is difficult.

AI-generated from the text of customer reviews

Select to learn more
SturdinessWeight capacityThread qualityEase of movement
4 customers mention "Sturdiness"4 positive0 negative

Customers are satisfied with the sturdiness of the product. They mention it's sturdy and definitely won't move when in place. The clamp is solid, and hasn't sagged at all after a few weeks.

"...is currently holding at a semi-horizontal position and actually seems fairly secure, but it was incredibly difficult to get the nut tightened down..." Read more

"I got this to hold a webcam on my stacked monitor set up. It holds it well...." Read more

"...The product is sturdy and definitely won't move when in place. Aside from one clamp being useless, this is a finely made camera arm...." Read more

"...I was not impressed. The clamp is solid though." Read more

7 customers mention "Weight capacity"0 positive7 negative

Customers are dissatisfied with the weight capacity of the portable electronic device mount. They mention it's not very strong, and both sides strip after a few uses. Some also say the quality is low and the metal is cheap.

"...but even snugging down the "wing nut" about as far as I can, it barely seems to hold at around 45 degrees from vertical..." Read more

"...When I was trying to set it up, it couldn't even support it's own weight. When I tried to tighten it, the threading started stripping...." Read more

"...the magic arm once (while on a videoshoot) and it immediately broke at the camera mount. Don't waste your money on this POS." Read more

"This was definitely a waste of money. Wasn’t very strong and both sides striped in a matter of a few uses. Threads don’t lock in place well." Read more

6 customers mention "Thread quality"0 positive6 negative

Customers are dissatisfied with the thread quality of the portable electronic device mount. They mention the clamps threads strip immediately upon holding the arm weight horizontally. Some say the metal threads have failed and the arm will not stay attached to the C clamp.

"...Arms arrived without the c-style clamps for some reason, but when I contacted the seller they sent replacements right away." Read more

"...When I tried to tighten it, the threading started stripping. Low quality and disappointing." Read more

"...Aside from one clamp being useless, this is a finely made camera arm...." Read more

"Appreciate the 19” length where most are 11”. But the clamps threads stripped immediately upon holding the arm weight horizontally...." Read more

3 customers mention "Ease of movement"0 positive3 negative

Customers are dissatisfied with the ease of movement of the portable electronic device mount. They mention it's difficult to get the nut tightened down enough, and the c-clamp keeps coming loose.

"...and actually seems fairly secure, but it was incredibly difficult to get the nut tightened down enough for me to feel comfortable that the speaker..." Read more

"...It holds it well. I had an issue where one of the ball joints was extremely difficult to move but after a bit it got easier...." Read more

"The c-clamp kept coming loose. now the metal threads have failed and the arm will not stay attached to the c clamp." Read more

A fine product, but the tube clamp has no 1/4" thread
3 out of 5 stars
A fine product, but the tube clamp has no 1/4" thread
My product wasn't as the videos and pictures imply. The tube clamp didn't have a 1/4" thread, only two 3/8" threads, so I couldn't attach the arm to the tube clamp. However, the other clamp seems fine, but then only has two 1/4" mounting holes and no 3/8" mounting holes. The product is sturdy and definitely won't move when in place. Aside from one clamp being useless, this is a finely made camera arm. The distributor just needs to fix whatever inventory issues they have and I'd round this product up another star. I was able to source another tube clamp (looks like the exact same one) from another seller on Amazon for a few more dollars.
Hide
Thank you for your feedback
Sorry, there was an error
Sorry we couldn't load the review

Top reviews from the United States

Algernon
5.0 out of 5 stars Use this on a Magnetic Helping Hand base.
Reviewed in the United States on February 15, 2023
Verified Purchase
If you buy one of these:
Magnetic Helping Hands Soldering Third Hand, PCB Circuit Board Holder with 3X LED Magnifying Lamp, 360 Hot Air Gun Holder, Extra Large & Heavy Duty Base Plate | Flexible Arms for Soldering Station

...and you have a 1/4" 20 tap, the helping hand base plate has predrilled holes that are perfect to thread for this flexible arm. I love how one thumbscrew loosens and tightens all of the joints at once. Can also screw the arm into the heavy magnet base that holds the vise. I wish they sold those heavy magnet bases separately.
Helpful
 Report
Thomas
3.0 out of 5 stars Recommend for light-weight applications - 1kg near vertical, <500 grams horizontal
Reviewed in the United States on July 19, 2022
Verified Purchase
I purchased two of these (simultaneously not as a replacement for a defective one). I've used one other brand and design of friction joint arms at the same price point, just shorter, with silver ends and a metal wingnut. Compared with the shorter one, this 19.7" arm makes me nervous to rely on it to hold anything important. One I currently have set up with a center channel speaker, and the other I'm keeping available for an LED panel soft light. The soft light weighs around 1.05 kg and the speaker is less than 800 grams. The speaker is currently holding at a semi-horizontal position and actually seems fairly secure, but it was incredibly difficult to get the nut tightened down enough for me to feel comfortable that the speaker wasn't going anywhere. The arm with the LED panel seems to be able to hold alright at a shallow angle, but even snugging down the "wing nut" about as far as I can, it barely seems to hold at around 45 degrees from vertical (both segments mostly straight).

One side of the arm with the center speaker (ball-jointed section) keeps getting stuck and will not unloosen when the nut is turned without a lot of force

Bottom line - it's ideal for holding a cell phone, lightweight LED lights, webcams (in a pinch). I'd be seriously cautious about relying on this for anything weighing more than 500 grams, certainly less than 1kg, and even more hesitant to use this for any kind of daily driver.

I'll update with how the arms hold up over time.
One person found this helpful
Helpful
 Report
Zachary Moore
5.0 out of 5 stars Good Customer Service
Reviewed in the United States on July 8, 2022
Verified Purchase
Clamps work great to hold up two oversized ring lights. Arms arrived without the c-style clamps for some reason, but when I contacted the seller they sent replacements right away.
Customer image
Zachary Moore
5.0 out of 5 stars Good Customer Service
Reviewed in the United States on July 8, 2022
Clamps work great to hold up two oversized ring lights. Arms arrived without the c-style clamps for some reason, but when I contacted the seller they sent replacements right away.
Images in this review
Customer image
Customer image
Helpful
 Report
Karen
1.0 out of 5 stars Couldn't even support it's own weight.
Reviewed in the United States on July 26, 2022
Verified Purchase
I will be returning this. When I was trying to set it up, it couldn't even support it's own weight. When I tried to tighten it, the threading started stripping. Low quality and disappointing.
One person found this helpful
Helpful
 Report
Chris Rhoad
2.0 out of 5 stars Don't waste your money.
Reviewed in the United States on June 21, 2022
Verified Purchase
I tightened the magic arm once (while on a videoshoot) and it immediately broke at the camera mount. Don't waste your money on this POS.
Helpful
 Report
Leonel
5.0 out of 5 stars It does the job
Reviewed in the United States on January 4, 2023
Verified Purchase
I got this to hold a webcam on my stacked monitor set up. It holds it well. I had an issue where one of the ball joints was extremely difficult to move but after a bit it got easier. Hasn't sagged at all after a few weeks. It'll most likely buy another soon
Helpful
 Report
Jae Rin
3.0 out of 5 stars A fine product, but the tube clamp has no 1/4" thread
Reviewed in the United States on April 28, 2022
Verified Purchase
My product wasn't as the videos and pictures imply. The tube clamp didn't have a 1/4" thread, only two 3/8" threads, so I couldn't attach the arm to the tube clamp. However, the other clamp seems fine, but then only has two 1/4" mounting holes and no 3/8" mounting holes. The product is sturdy and definitely won't move when in place. Aside from one clamp being useless, this is a finely made camera arm. The distributor just needs to fix whatever inventory issues they have and I'd round this product up another star. I was able to source another tube clamp (looks like the exact same one) from another seller on Amazon for a few more dollars.
Customer image
Jae Rin
3.0 out of 5 stars A fine product, but the tube clamp has no 1/4" thread
Reviewed in the United States on April 28, 2022
My product wasn't as the videos and pictures imply. The tube clamp didn't have a 1/4" thread, only two 3/8" threads, so I couldn't attach the arm to the tube clamp. However, the other clamp seems fine, but then only has two 1/4" mounting holes and no 3/8" mounting holes. The product is sturdy and definitely won't move when in place. Aside from one clamp being useless, this is a finely made camera arm. The distributor just needs to fix whatever inventory issues they have and I'd round this product up another star. I was able to source another tube clamp (looks like the exact same one) from another seller on Amazon for a few more dollars.
Images in this review
Customer image
Customer image
3 people found this helpful
Helpful
 Report
The Man from Denver
1.0 out of 5 stars Threads strip in clamp immediately
Reviewed in the United States on January 21, 2023
Verified Purchase
Appreciate the 19” length where most are 11”. But the clamps threads stripped immediately upon holding the arm weight horizontally. Male end of threads on the ball joint also lightly distorted.
Helpful
 Report