|Item Weight||0.3 ounces|
|Product Dimensions||2.08 x 0.88 x 0.71 inches|
|Item model number||13|
|Is Discontinued By Manufacturer||No|
|Manufacturer Part Number||IBrightstar-3157-3014 3030-54 3R|
|Mirror Lighting Type||Automotive-exterior-tail-light-bulbs, Automotive-exterior-combination-turn-signal-and-fog-light-bulbs|
iBrightstar Newest 9-30V Super Bright Low Power Dual Brightness 3156 3157 3056 3057 LED Bulbs with Projector Replacement for Tail Brake Lights,Brilliant Red
|Light Source type||LED|
|Item Weight||0.3 Ounces|
About this item
- Make sure this fits by entering your model number.
- (Set of 2 Bulbs)54SMD 3014 & 3SMD 3030 high brightness chips per bulb,Working Voltage:9v-30v,Size: 2.08"x 0.88" x 0.71"
- Fits: 3056 3057 3057K 3057LL 3155 3157 3157K 3157NA 3157NAK 3157LL 3156NA 3156A 3156 3156K 3357 3357K 3357KNA 3357LL 3457 3457-NA 3457K 3457NAK 3757AK 3757ALL 4057 4057LL 4057K 4114 4114LL 4114K 4157 4157LL 4157K 4157NA 4157NAK 5702A 5702AK 5702AK etc.Easy installation, plug and play.
- Application:Brake Lights,Tail Lights etc.Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights.
- Advantage:Compatible for both CK/SRCK and Standard socket, non-polarity design.300% brighter than original halogen bulb, full Aluminum Housing with Projection lens for Maximum Light output and better heat distribution,built in Constant Current IC for Longer life span & Low Power Consumption.
- Please double check owners manual or original bulb number to confirm before placing an order. Any other problem please feel free to contact us, we are always here to satisfy of you.
Consider this Amazon's Choice product that delivers quickly
Frequently bought together
Customers who viewed this item also viewed
More items to explore
Have a question?
Find answers in product info, Q&As, reviews
Your question may be answered by sellers, manufacturers, or customers who purchased this item, who are all part of the Amazon community.
Please make sure that you are posting in the form of a question.
Please enter a question.
This bulb is compatible for both CK/SRCK and standard socket with Non-polarity design. Best value in the market!
Dual Brightness: The Dim mode is Tail lights or DRL, while the Bright mode is Brake lights or Turn Signal lights. The bulb run in Bright mode when your bulb only function in one mode.
High Brightness LED: 54SMD 3014 chipset & 3SMD 3030 chipset.
Working Voltage: 9-30V (fit 12V, 24V vehicles).
Output Wattage: 3W/bulb (Low Power Consumption).
Color: Brilliant Red.
Service Life: Up to 30,000 Hours.
Note: Load resistor or flash relay might be needed to prevent the hyper flash when replacement for Turn Signal Lights.
Warranty: iBrightstar Warranty for 1 year from date of purchase. Warranty type: Exchange or replacement.
IMPORTANT NOTICE! Please confirm the bulb base before placing an order.
iBrightstar is a registered brand with Amazon. Please contact us if there is any questions or other requests!Please check the bulb base before placing an order. If the customer order a wrong size it will cause doesnt fit their car. Since LED bulbs have no wattage with the stock bulbs and resulting in a smaller current when the car system detected the current smaller than before it will cause flasher to hyper flashing or created error. Requires a resistor or flash relay to prevent the hyper flash.
What other items do customers buy after viewing this item?
Top reviews from the United States
There was a problem filtering reviews right now. Please try again later.
However, this is not the fault of the LEDs but rather the car so no stars deducted there. For what it's worth, the 2011 Tahoe does not have a turn signal relay to replace, so your options are finding a dealer to reprogram your system or wiring a resistor in-line. I'm going with the latter shortly and will update this if for any reason that does not work.
Installation: Install was a breeze. Opened hood, removed three 9mm screws (I believe they were 9mm), plus one phillips head plastic rivet type screw. After that, simply pull gently on light while rocking side to side. Twist socket to pull out bulb from housing, then pull bulb straight out of socket. Install new LED, repeat steps above.
Note: LED polarity does matter. If the LED does not work, remove it, flip it around, then reinstalled. Both of mine worked immediately.
Performance: These are significantly brighter then the OEM halogen's. There is no issue with double-dealing which is great. When flashing, the brightness difference between running light and flash is acceptable and comparable to the relative difference in brightness of a halogen. -- Cannot comment on longevity. Will update in the future (or if they go out).
OVERALL: I would recommend these to replace OEM bulbs.
Pictures attached. Unfortunately I am stupid and planned to complete this at night, however failed to do so. NIGHT PICTURE is OEM. Daytime picture is LED. (Not very helpful, I know. Will upload a night picture of LED later)
They do cause hyperflash in the dash indicator, but the turn signals flash normally (vehicle programming, not the LED's fault).
They are not polarity sensitive which means a bridge rectifier is in the circuit. And the large voltage range means there is a voltage limit in the circuit as well. Not really a problem, but additional components will fail sooner than later. I hope they last longer than 1 year.... We'll see.
Here are the resistors I used:
In the video, I had installed the LED blinker on the right, and the original bulb is still on the left. So you can kind of see the brightness difference. I also attached a picture of where I installed the resistor.
FYI - They ship wrapped in some bubble wrap in a small ziplock bag. It worked out but a box would be nice for more shipping protection.
I will update if any issues occur.