Top critical review
8 people found this helpful
older model is great when using the "air" feature, newer model is not so great
on January 6, 2014
Overall I like this, though I with it were a full sized mouse.
I never use this as a normal mouse on a flat surface. It is just too small to be comfortable.
But I think it really good using it in the "air" mode. It's shaped nicely and is laid out well to use in this mode.
UPDATE 3: The company's support is LOUSY. I asked about the complaints I had with the newer mouse. They said it was defective and I could send it in for a replacement. I did. 3+ WEEKS later I still had not received a replacement or any communications. I contacted them a few times and received no response. BUT eventually a mouse did arrive in the mail. EXCEPT it has the exact same problems. So either they just returned my mouse or they were wrong about it being a defect. Even since they have refused to respond to any more emails from me. I still use both mice, but I really hate using the newer one. And I have to assume that the behavior of misinterpreting a trigger clicks as double clicks is the normal behavior. So I can't recommend this as an air mouse for serious use. It is ok if you want a remote control sort of mouse you use once "every now and then" but not for continuous use in the air. And their support has shown itself to be worthless.
UPDATE: I own 2 of these. 1 I've had for 4-5 years. That one I think is worth 4 stars.
But the one I just purchased is worth 3 or maybe 2 stars.
They've updated the hardware I think, or it is just windows8 being "helpful"
But I really don't like the change in behavior. Especially the fact that the delay between "trigger clicks" to switch to constant motion on mode has changed. It is now far too easy for it to think you have double clicked the trigger.
So now I find myself doing something like "hold trigger; move; release trigger; hold trigger; move; release trigger" only to find that when I put the mouse down to type, it still thinks I want it to move which I very definitely do not.
So now I have to
"hold; move; release; hold; move; release; set down; swear; pick up; double click; move just to make sure recognized the double click; set down"
UPDATE 2: The source of my complaint seems to be that it mistakes the following sequence of "motion button" actions as a double click
1) button down and hold
2) move mouse for awhile, much longer than the max double click duration
3) button up (let go of the button)
4) button down and hold (within double click max time)
The older version of the mouse did not do this, so it is a "feature" added in a fix to the hardware.
I doubt there is a firmware update for these to fix this unfortunately.
The bad version of the mouse is dated Feb 2012; Model AS03507-002.
I'd post the good version info but I've had that one so long the label on the bottom isn't readable anymore and it came off.
I have an older version of this that I like except it has some weird expensive battery pack and is useless when it runs out of power. This device on the other hand accepts AA batteries so I just swap batteries when they're dead.
The older version is almost identical in use though. I use the same fingers and grip to use it as I use with this.
Whether they planned the design out, or just got lucky, this mouse is really well designed for air usage. To me that usage feels very natural and there is little or no awkwardness at all. This is really impressive considering just how often other electronics seem to always have a few major issues that make some common use of them feel very awkward. There is almost always some button or slot or switch that you have to you use that are placed in really weird location.
ex: smart phones with the 1 memory card slot UNDER the battery... rather than on the side
ex: wireless keyboards that get poor battery life with the power switch in a really awkward to access location
and so on.
The mouse is shaped really nicely so the base fits well in the palm of my hand. Plus there are soft rubber surfaces in the right places to be able to hold the mouse in a very loose grip rather than having to tightly squeeze it to hold it. This is fairly important if you use it a lot.
For anyone that hasn't used one of these before, when using as an air mouse:
I use my index or middle finger to trigger motion and my thumb to click or scroll.
And the power switch is right below the motion trigger so the same finger that's on the trigger can easily turn off the mouse.
Or the next finger down. I usually use my ring finger to switch the mouse on and off. And for moving the pointer I rarely move more than my wrist. You don't need to make huge motions with your elbow, and you can use the mouse the whole time with your forearm resting on say an arm rest of whatever you're sitting on.
To use the mouse, you "trigger" motion detection when you want to use it and then either turn it off or let it turn off when you're done moving the pointer. Once motion is off you can just drop the mouse or use the buttons or scroll wheel. The really nice thing about this is you can use these functions without having the pointer move at all.
So for example, I need to double click on something, I first turn on the power and then hold the motion button (trigger) Then I move to the icon. Once the pointer is on the icon I let go of the trigger which means the pointer won't move any more. Then I double click and can set the mouse down.
"Motion detection" (air mode?) is controlled by button on the bottom that feels like a trigger.
This is used to toggle the motion detection on and off.
What it does is toggles the 3d motion detection that moves the pointer around. Any movement of the mouse is turned into left/right or up/down motion of the pointer on the screen.
I can describe which mouse motions turn in to which pointer movements, but it is probably better to just try it and get a feel for it rather than think about it. Plus I'd need diagrams to really describe the 3rd motion.
When this mode is OFF, you can move the mouse around and the pointer won't move.
When it is ON, any movement of the mouse results in movement of the pointer on the scree.
AND regardless of whether this is on or off, the mouse buttons and scroll wheel and button continue to work.
This last bit is really important especially if you have shaky hands/fingers like I do. It means you can freeze the pointer over what you want to click on before you try to double click and prevents accidental dragging too.
Basically I turn on motion and move the pointer to where I want, then I turn off the motion before double clicking so my click motion doesn't move the pointer.
The trigger works in 2 ways:
You can either just hold the trigger down and move the mouse, then let it go to stop the mouse from moving the pointer.
You "double click" the trigger to turn on pointer movement, and then when you're done, you double click it again to turn off pointer motion.