Customer Review

Reviewed in the United States on March 23, 2020
I have been resin printing for about a year and a half. In that time, I have tried my fair share of DIY washing and curing setups. From multiple jars of IPA to UV Lights glued onto containers, or just leaving prints outside in the sun, I’ve tried it all.

I recently learned of Anycubic’s Wash and Cure station and decided to give it a try. This machine has definitely streamlined my post-processing.

The machine comes with a large container to hold your IPA or other cleaning liquid, and there is an agitator blade in the bottom which is controlled by magnets to ensure a secure, leak-proof containment.
You can choose 2, 4 or 6 minute intervals, and half way through the cycle, the agitator blade reverses ensuring flowing cleaner will wash your parts from both directions.

The machine comes with 3 ways to submerge your parts. The first is a metal basket which you can put the parts in if you’ve already removed them from the build plate. There are also a fixed and adjustable build plate holder. This allows you to submerge the build plate so it gets cleaned at the same time as the printed part. The build plate holders are designed to fit most resin printer models, though I had to modify the diameter of the metal connector slightly to get it to hold my Elegoo Mars build plate securely.

When it’s time to post-cure your parts, there is a clear curing platform that you port into the middle of the machine. After placing the piece on the platform and placing the lid over the machine, you can set it to curing mode and, like the washing mode, choose 2, 4 or 6 minute cure time. Once started, an array of UV lights is activated while the curing platform rotates 360 degrees.

This machine makes the post-printing process so much cleaner and easier. No more swirling printed parts around in a jar of IPA with tongs. No more cleaning the build plate or having to use a homemade UV curing box. I would highly recommend this machine for anyone who is into resin printing.
Customer image
5.0 out of 5 stars A Great Investment For Anyone Who Is Into Resin Printing
By Kody D. Belshe on March 23, 2020
I have been resin printing for about a year and a half. In that time, I have tried my fair share of DIY washing and curing setups. From multiple jars of IPA to UV Lights glued onto containers, or just leaving prints outside in the sun, I’ve tried it all.

I recently learned of Anycubic’s Wash and Cure station and decided to give it a try. This machine has definitely streamlined my post-processing.

The machine comes with a large container to hold your IPA or other cleaning liquid, and there is an agitator blade in the bottom which is controlled by magnets to ensure a secure, leak-proof containment.
You can choose 2, 4 or 6 minute intervals, and half way through the cycle, the agitator blade reverses ensuring flowing cleaner will wash your parts from both directions.

The machine comes with 3 ways to submerge your parts. The first is a metal basket which you can put the parts in if you’ve already removed them from the build plate. There are also a fixed and adjustable build plate holder. This allows you to submerge the build plate so it gets cleaned at the same time as the printed part. The build plate holders are designed to fit most resin printer models, though I had to modify the diameter of the metal connector slightly to get it to hold my Elegoo Mars build plate securely.

When it’s time to post-cure your parts, there is a clear curing platform that you port into the middle of the machine. After placing the piece on the platform and placing the lid over the machine, you can set it to curing mode and, like the washing mode, choose 2, 4 or 6 minute cure time. Once started, an array of UV lights is activated while the curing platform rotates 360 degrees.

This machine makes the post-printing process so much cleaner and easier. No more swirling printed parts around in a jar of IPA with tongs. No more cleaning the build plate or having to use a homemade UV curing box. I would highly recommend this machine for anyone who is into resin printing.
Images in this review
Customer image Customer image
Customer imageCustomer image
35 people found this helpful
Report abuse Permalink

Product Details

4.8 out of 5 stars
4.8 out of 5
864 global ratings