Customer Review

Reviewed in the United States on January 18, 2020
To be fair, this is the only resin I have used, I started with it since I bought an Elegoo brand 3D printer and figured for the first few bottles I would use their brand to be safe. Since then, I have continued to buy just this resin. The color choices are great, I have used the grey, white, black, and clear red so far and they have all been great. I have had very few failed starts on my prints, and they may have had nothing to do with the resin.

The reasons I have only bought this resin are:

- The low odor is hardly noticeable to me, the 90% IPA actually has a MUCH more noticeable odor than the resin, and as I
use this in the house in my hobby room that is very important to me, well, my wife really, but that is what matters. ; ]
- The price is neither the lowest nor the highest out there, so I feel it is a fair value.
- The print results have been really great, I will attach a few photos to the review.
- I figure I have a good thing going, so why mess with it.

The only things I have noticed with this resin so far are that:
- It is very important to check the exposure times for the resin before printing, some of the darker colors take more
seconds per layer.
- The white resin sometimes has visible layer lines in the final print. You can not feel them, nor see them when painted,
but when it is just the bare resin they are sometimes visible.
- You will want a cure light if you live anywhere that you don't have access to a fair amount of sunshine. I am in the
Pacific North West, and left a print in the window sill for a week and it was still not fully cured. But under a UV light
on a turn table it is done in 5 to 6 minutes for most prints.

If I learn anything else, or start to experience different results I will update this review.
Customer image
5.0 out of 5 stars Works great with very few failed starts and great results
By Sage on January 18, 2020
To be fair, this is the only resin I have used, I started with it since I bought an Elegoo brand 3D printer and figured for the first few bottles I would use their brand to be safe. Since then, I have continued to buy just this resin. The color choices are great, I have used the grey, white, black, and clear red so far and they have all been great. I have had very few failed starts on my prints, and they may have had nothing to do with the resin.

The reasons I have only bought this resin are:

- The low odor is hardly noticeable to me, the 90% IPA actually has a MUCH more noticeable odor than the resin, and as I
use this in the house in my hobby room that is very important to me, well, my wife really, but that is what matters. ; ]
- The price is neither the lowest nor the highest out there, so I feel it is a fair value.
- The print results have been really great, I will attach a few photos to the review.
- I figure I have a good thing going, so why mess with it.

The only things I have noticed with this resin so far are that:
- It is very important to check the exposure times for the resin before printing, some of the darker colors take more
seconds per layer.
- The white resin sometimes has visible layer lines in the final print. You can not feel them, nor see them when painted,
but when it is just the bare resin they are sometimes visible.
- You will want a cure light if you live anywhere that you don't have access to a fair amount of sunshine. I am in the
Pacific North West, and left a print in the window sill for a week and it was still not fully cured. But under a UV light
on a turn table it is done in 5 to 6 minutes for most prints.

If I learn anything else, or start to experience different results I will update this review.
Images in this review
Customer image Customer image Customer image Customer image
Customer imageCustomer imageCustomer imageCustomer image
27 people found this helpful
Report abuse Permalink

Product Details

4.7 out of 5 stars
4.7 out of 5
3,898 global ratings