It’s cheap and does the job, however I recommend shedding a couple of extra bucks and getting a different projector screen. I ordered the 100” pull down projector screen and two days later it arrived; however it did not work. The screen wouldn’t pull down more than a few inches. I had to repack it, and take the long defective screen to a ups store; very inconvenient. They sent out a replacement. It arrived four days later, this one luckily did pull down BUT the top white part of the screen is cut at an angle reducing the length of the right side by about .5”, making it more of 99.5” screen and makes it look lopsided. My screen is mounted level, it’s the cut on the screen that is not level. At this point I guess I’ll deal with it since I’m not trying to repack and take it to the UPS store, again! Also, I didn’t capture it too well in the picture but there are wrinkles.
If they all pulled down okay, and the screen was a perfect rectangle with 90° angles then I’d totally recommend it. The mounting is pretty easy and straight forward. Unfortunately that was not my experience and can’t rate it too well. I have a great projector so picture looks amazing, except for that corner on the top right that projects on the black uneven corner.