Amazon.com: Customer reviews: Haoge LH-X53B Square Metal Lens Hood Shade with Metal Cap for Fujifilm Fuji Fujinon XF 35mm F1.4 R / XF35mmF1.4 R Lens on Camera X-H1 XS-10 X-Pro3 X-T4 X-T3 X-T2 X-T30 X-T20

Top positive review

It actually DOES fit the Fuji 18mm ƒ/2 lens. Great replacement hood.

Reviewed in the United States on October 16, 2021

Despite one review saying this hood doesn't fit the Fuji 18/2, mine fits well. It's a good bit on the tight side going on but this guarantees it will not come loose easily. I specifically bought this hood for my 18mm and I'm very pleased with it.

I have replaced most of the Fuji hoods on my Fujinon lenses with these Hoage square metal hoods. They are low profile and well made and of a much better design than any of the Fuji hoods, even the optional and very expensive Fuji hoods I was using for the 23/2, 35/2 and the 23/1.4 lenses.

I really hate using lens hoods that are shaped like dinner plates or cannon barrels. They bump on everything, draw attention to the shooter and many times fall off after getting loose from a few bumps. The Hoage hoods seem sturdy and should last for many years of use.

6 people found this helpful

Top critical review

Critical reviews›

mary

Good product, wears down fast

Reviewed in the United States on October 2, 2023

I have had it for less than a month and the material inside the lens cap is peeling. The lens cap doesn't stay on at all now.

I've heard great things about this brand and hope my product was defective. Anyone else have a solution to this?

24 total ratings, 13 with reviews

There was a problem filtering reviews right now. Please try again later.

From the United States

A photographer

It actually DOES fit the Fuji 18mm ƒ/2 lens. Great replacement hood.

Reviewed in the United States on October 16, 2021

Verified Purchase

6 people found this helpful

Helpful

G. Cunningham

Superb hood that also fits the 60mm Macro!

Reviewed in the United States on May 17, 2022

Verified Purchase

I'm very impressed with these Haoge hoods! This one is the equal of the Fujifilm product, at a significant savings (though it's still an expensive item.) It fits perfectly and the quality of construction is flawless.

As mentioned, I used this to replace the HUGE hood that comes with the Fujifilm 60mm f2.4 Macro. Fits the lens like a glove, and is frankly a little higher quality than the Fuji original.

Yes, it's expensive — but have you priced the Fujifilm equivalent?

One person found this helpful

Helpful

Danijel Djukovic

Better than original Fuji hood

Reviewed in the United States on August 13, 2022

Verified Purchase

I lost the original Fuji hood that came with the lens, so I decided to try this one since the price was much cheaper. This hood is at least as good as the original Fuji one. I think it is even slightly better made. It fits nice and tight and absolutely zero wobbling. This is all metal made hood and cap, so the quality of the material feels great and this hood should last for ages. I keep this hood all the time on the lens.

Helpful

mary

Good product, wears down fast

Reviewed in the United States on October 2, 2023

Verified Purchase

Helpful

Cheng-Tao Chen

Another alternative to Fuji lens hood for 35mm f1.4

Reviewed in the United States on June 28, 2021

Verified Purchase

I was so tired of the rubber cap keeps falling down to the dirt from Fuji made lens hood on my 35mm f1.4 lens, so I searched Amazon for alternative and found this lens hood made by Haoge. Overall build quality is good and it does solve my problem; the metal cap that comes w/ the lens hood attached to the hood securely and is not going to fall off easily, at least for now, not sure if the cap will loosen up after long period of on/off the hood. The hood itself is shorter than the Fuji lens hood and the finish is matte finish; I kind of prefer the shinning look/finish of Fuji one. Overall, I think the Haoge LH-X538 is a decent lens hood, especially if you are struggling w/ Fuji rubber cap keep falling off the lens hood.

2 people found this helpful

Helpful

Winston

Do not buy! The inner protective material curls and is impossible to use

Reviewed in the United States on October 14, 2022

Verified Purchase

As the title of this review mentions, the inner protective material curls over time as you attach and detach the lens hood from the lens. The curling of that material makes it impossible to then attach and detach the hood. The glue they used on the protective material, or the design itself, is poor and faulty. Unfortunately I’m stuck with the product since the rerun window has closed.

2 people found this helpful

Helpful

Gustavo

Works Great, Looks Great

Reviewed in the United States on August 30, 2021

Verified Purchase

Does a terrific job. Keeps out glare, looks sharp on the lens, and does not get in the way of filters. Material is good and the cap slides on and off without issues.

2 people found this helpful

Helpful

David

Better than original

Reviewed in the United States on August 19, 2021

Verified Purchase

This is thicker than the original (so less likely to get bent) and the metal, round lens cap won’t get knocked off like the Fuji rubber version. Very satisfied with hoods I’ve bought from Haoge

Helpful

Reveal the Random

Doesn't fit 18mm f2

Reviewed in the United States on June 16, 2021

Verified Purchase

Fits the 35, but doesn't fit my 18mm f2 :( and a little big looking than the original
But good quality...

One person found this helpful

Helpful

Gungle

Better then the original

Reviewed in the United States on September 7, 2022

Verified Purchase

It took me a while to find this hood . I really considered the squarehood brand one because it was so flush but was turned away when I found out how easily the paint comes off of it . I’ve owned haoge before and they do make great products . Lens caps fits snug and the hood clicks right on like the oem hood . This one was a little pricey but it was either deal with the stupid rubber cap on the factory hood or don’t use a hood at all which can be annoying at times . This is probably the best option out there for the xf 35 1.4 imo

Helpful

Questions? Get fast answers from reviewers

Need customer service?

‹ See all details for Haoge LH-X53B Square Metal Lens Hood Shade with Metal Cap for Fujifilm...

5 star
4 star
3 star
2 star
1 star

Haoge LH-X53B Square Metal Lens Hood Shade with Metal Cap for Fujifilm...

›

Customer reviews

Customer reviews

Haoge LH-X53B Square Metal Lens Hood Shade with Metal Cap for Fujifilm Fuji Fujinon XF 35mm F1.4 R / XF35mmF1.4 R Lens on Camera X-H1 XS-10 X-Pro3 X-T4 X-T3 X-T2 X-T30 X-T20

Top positive review

Top critical review

There was a problem filtering reviews right now. Please try again later.

From the United States

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

Questions? Get fast answers from reviewers

Haoge LH-X53B Square Metal Lens Hood Shade with Metal Cap for Fujifilm... › Customer reviews

Customer reviews

Haoge LH-X53B Square Metal Lens Hood Shade with Metal Cap for Fujifilm Fuji Fujinon XF 35mm F1.4 R / XF35mmF1.4 R Lens on Camera X-H1 XS-10 X-Pro3 X-T4 X-T3 X-T2 X-T30 X-T20

Top positive review

Top critical review

There was a problem filtering reviews right now. Please try again later.

From the United States

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

There was a problem loading comments right now. Please try again later.

Questions? Get fast answers from reviewers

Haoge LH-X53B Square Metal Lens Hood Shade with Metal Cap for Fujifilm...

›

Customer reviews