First let me say I'm a "watch guy". I like watches, the more complex the better. This watch however is NOT overly complex. In fact it's a nice, SOLID stainless steel watch.
The only reason for the 4 star rating is in the title. The crown and pushers "look" like they screw down, but they don't. Not sure what this will do as far as water resistance, but time will tell.
Regarding the band... Unless you have the wrists of a gorilla, you will have to make it smaller. Contrary to what it looks like, those are NOT screws in the band. They are pressure type pins. I used a Watch Band Link Remover With 5 Pins Link Remover Tool. Could not have been easier. Put the pin in the side opposite of the direction of the little arrow on the band (when you get the watch you'll see what I mean) and then just slowly turn the knob on the tool. The pin comes out quite nicely. Just remove the number of watch band links you need (I took out 2 from each side and I have average to large wrists) then just reassemble the band.
To do this just re-insert the pins, making sure to put the side that looks like a screw top (again, you'll see what I mean when you get the watch) on the "pointed" side of the arrows.
There are also some smaller adjustments you can make on the clasp itself to fine-tune the sizing.
The rotating bezel works as it should.
The pushers and chronograph functions seem to be accurate and the watch looks to be keeping good time.
I recommend this watch without reservation as long as you understand you are not getting screw down crowns and pusher buttons.
Go ahead, it's a nice, solid very good looking watch. Buy it, you deserve it.