Turn Signals

Top Selected Products and Reviews

"2018 DRZ400sm" - by Hotshopper
Replaced the huge factory turn signals with these smaller signals. Look great! More than bright enough and with the flowing flash...they bring more attention to the signals. Have 600 HARD miles on them (SuperMoto) and working great. I like that they are flexible but not too flexible. Install was a snap, I cut off factory connectors and soldered and heat shrinked on to these new turn signals! Looks like they came factory on the Dizzer. You WILL need an LED flasher for these to work correctly on a bike like mine.
"Great turn signals but..needs a flasher relay" - by alex
Just installed them on my buell xb9sx. It DOESN'T flash with the stock flasher relay it will have a steady light. I bought a EP36 flasher relay led compatible and it works wonderfully . They are pretty bright and they look great. Now I'm hoping they will last
"So far these look really good in my 02 Corvette" - by Len V.
So far these look really good in my 02 Corvette, they are really bright. The only "got cha" thing is you'll need to make sure you order the resistors as well, otherwise you'll have the hyper blink going on. Resistors are only $7 from Amazon & easy to install.
"DEFINITELY AS PROMISED" - by SoCal Boricua
These things worked as promised! I took the time to solder and shrink tube the connections to the factory plug. So it took a little bit of time. But it's otherwise pretty straight forward and easy, if you have some basic electrical knowledge. They are BRIGHT as running lights and turn signals, and are, as far I can tell well made. They stuck nicely and wrapped well around the 41mm forks on my Yamaha Stryker. I believe these are a 6500k since they are more on the blue spectrum. I will be buying another set to place on the bottom of the forks... hey, the more you're noticed. The better chance you have of making out there with all the crazies in their 4 wheeled boxes.. lol. Good luck!
"Perfect" - by Amazon Customer
Very easy install, perfect fit. Not too dark, not too light. Please be aware that if you get these you need to also buy LED bulbs that are red in the back and yellow in the front, these lens covers take away the color from the bulbs and you will get pulled over if you don't get new bulbs. very good product
"provides the safety and visibility old people demand!" - by Novaendi
I wrapped these around the lower triple clamps where the fork tubes go through, on my old GL1100. They are low profile, are not godawfully ugly, bend easily, and have stayed attached through several months of rain, hot sun, and now the winter. tolerates 14.5 volts np. They are very bright too, and provide the safety and visibility old people demand!
"Seem to work good. Used them for turn signal/marker lights on jeep ..." - by Kyle
Seem to work good. Used them for turn signal/marker lights on jeep TJ with Barricade flat fenders. Had to bore out the hole in the fenders as they were a little bit oblong from the factory. My only qualm is that they are a little bit different colour than the actual turn signals (JK style) I also added.
"Looks good" - by David Brewer
These turn signals look great and fit good. the weatherstrip seal is kinda sucky. other than that the lights that come with it are great and they look sharp!!
"They work, but mine don’t flow with all the leds" - by Anthony hicks
Install is really quick and overall everything seems like good quality. My only problem is that the last 3 leds on each side do not light up. Either underpowered or maybe I need a relay. I tested them on a battery charger and they work perfectly so it’s gotta be my fault that they are not working properly.
"2017 KTM Duke 690 Worked Great!" - by Justin Barrett
The Wiring was definitely an issue but all in all a good Product. I would suggest getting a relay or something to adapt to the turn signals because they do use a lot of electricity. These definitely looked amazing! Would suggest to anyone.
"Nice turn signal bulbs" - by Coto Pete (Coto de Caza, California)
These are nice little LED bulbs. It's good that they're amber for use in front turn signals. They fit nicely in OEM 1157 sockets (clean them a little first and apply a tiny bit of WD40 to make it easier to get them in) and are about the same size as the original bulbs. As far as being "super bright", they look about the right brightness to me, both as parking lights and turn signals. They're probably a little brighter than stock, but that's a good thing in my opinion. Of course, they are "instant on" as with any LED, so that's a plus too. Provided they hold up, I recommend them.
"Great for the price" - by Dan G. (Los Angeles)
Great for the price, put them on my 1983 Honda CB1000 Custom. Not quite as large as original, but does the job. Wires plugged right into original lines, just tighten nuts and good to go.
"Too right" - by jared clowes (Auburn)
The price was unbeatable and installation was simple. My turn signals were broken off on my bike when I dumped it, these were very similar to my old ones, they project out from the body so, the choices were innumerable, but i chose these because they have a backlight indicator that is blue and my accent color is also. These were so easy to install and I mounted them exactly where my old ones were previously. The little things are bright as hell, definitely grabs your attention, and looks good too. Shipping was the icing on the cake, two days to ship and I was on the way to installing. Thanks for a purchase well made.